mobile | classic
Dataweek Electronics & Communications Technology Magazine





Follow us on:
Follow us on Facebook Share via Twitter Share via LinkedIn


Search...

Electronics Buyers' Guide

Electronics Manufacturing & Production Handbook 2017


 

Heavy duty connectors
9 November 2016, Interconnection

TE Connectivity’s broad range of HDC heavy duty connectors are designed for reliably performing under the most demanding operating and harsh environmental conditions. Thanks to their modular system, they offer power, signal and data transmission in one connector.

Beside the well-known standard connectors (6 - 24 pins), the product range also offers product series featuring a high number of pins (up to 216) and high-current connectors of up to 200 A. The housings are made from aluminium die-cast or thermoplastic with a degree of protection IP65 - 69k. EMI-shielded and corrosion-protected variants complete the product range.

With TE’s new HDC docking frame, customers can benefit from a time-saving and cost-efficient solution to reliably connect in drawers via blind mating. Blind mating allows the connectors to guide themselves into the correct mating positions in environments where direct visibility or access is limited. With guide pins that replace a locking system, the connectors provide ease of handling.


Credit(s)
Supplied By: Electrocomp
Tel: +27 11 458 9000
Fax: +27 11 458 9034/5
Email: andrew@electrocomp.co.za
www: www.electrocomp.co.za
  Follow us on Facebook Share via Twitter Share via LinkedIn    

Further reading:

  • NTC inrush current limiters data book
    11 October 2017, Electrocomp, Technical Literature
    TDK has produced a fully revised data book for EPCOS NTC inrush current limiters, including the new P27 series with a lead spacing of 7,5 mm. These components have a disk thickness of 7 mm and are designed ...
  • Poke-home contacts for thick and thin wires
    11 October 2017, TRX Electronics, Interconnection
    The industrial and solid state lighting markets continue to look for new products which will reduce size and cost without jeopardising performance. The new ‘Stript’ dual-beam boxed contact system from ...
  • Film capacitors for AC applications
    11 October 2017, Electrocomp, Passive Components
    EPCOS MKP film capacitors of the B3275 series are optimised for use with AC voltages with high ripple currents. The new types are available for rated voltages of 250 VRMS, 275 VRMS and 310 VRMS and cover ...
  • NTC inrush current limiters data book
    13 September 2017, Electrocomp, Technical Literature
    TDK has produced a fully revised data book for EPCOS NTC inrush current limiters, including the new P27 series with a lead spacing of 7,5 mm. These components have a disk thickness of 7 mm and are designed ...
  • High-temperature MOVs
    13 September 2017, Electrocomp, Circuit & System Protection
    TDK has introduced leaded EPCOS metal oxide disk varistors which have now been approved for an increased operating temperature of 105°C (previously 85°C). The reason for this is the recertification ...
  • TVS diode array
    13 September 2017, Electrocomp, Circuit & System Protection
    Bourns announced the release of a new ESD protection product, the Model CDDFN10-2574N, for high-speed communication port applications. The TVS (transient voltage suppressor) diode array comes in a DFN-10 ...
  • Industrial power capacitors
    13 September 2017, Electrocomp, Passive Components
    TDK has significantly extended its range of EPCOS single-phase power capacitors for industrial electronics. The capacitors of series B32370* through B32374* are designed for rated AC voltages of between ...
  • Ethernet connector module
    13 September 2017, Webb Industries, Interconnection
    From Telegärtner comes the fully shielded AMJ-S module which can meet the stringent Cat 6A requirements for 10 Gigabit Ethernet. Its slim design in Keystone format (19,3 x 14,7 mm) ensures it will fit ...
  • Pre-terminated cable assemblies
    13 September 2017, RS Components (SA), Interconnection
    RS Components has announced availability of a number of pre-prepared cable assemblies that provide compatible solutions for key product ranges from Molex. Targeting a wide range of applications in industries ...
  • Poke-in connector for indoor lighting
    13 September 2017, TRX Electronics, Interconnection
    Available from TE Connectivity is a 2 position latched wire-to-wire connector that utilises poke-in termination to support easy field installation as no tools are required. The compact design makes this ...
  • Microwave cables and assemblies
    16 August 2017, RS Components (SA), Interconnection
    Huber & Suhner has developed a new range of semi-rigid RF/microwave cables and assemblies that offer ultra-high speed of more than 26 GHz. Key products in the range are the high-quality flexible SucoFlex ...
  • Stainless steel keypads
    16 August 2017, Brabek, Interconnection
    Apem’s new PR series stainless steel keypads offer a compact and economical solution in control panel applications, with a frameless selection and easy installation. Available with 1, 4, 12 or 16 round ...

 
 
         
Contact:
Technews Publishing (Pty) Ltd
1st Floor, Stabilitas House
265 Kent Ave, Randburg, 2194
South Africa
Publications by Technews
Dataweek Electronics & Communications Technology
Electronic Buyers Guide (EBG)

Hi-Tech Security Solutions
Hi-Tech Security Business Directory

Motion Control in Southern Africa
Motion Control Buyers’ Guide (MCBG)

South African Instrumentation & Control
South African Instrumentation & Control Buyers’ Guide (IBG)
Other
Terms & conditions of use, including privacy policy
PAIA Manual





 

         
    Classic | Mobile

Copyright © Technews Publishing (Pty) Ltd. All rights reserved.