mobile | classic
Dataweek Electronics & Communications Technology Magazine





Follow us on:
Follow us on Facebook Share via Twitter Share via LinkedIn


Search...

Electronics Buyers' Guide

Electronics Manufacturing & Production Handbook 2017


 

High-current test probes
22 February 2017, Test & Measurement

Thanks to their compact design, PTR’s range of high-current test probes are available for centres of 2,54 mm to 5,0 mm with a large number of different tip styles. Alternatively, all series are available in a threaded type which ensures an excellent fit in the receptacle.

Based on PTR’s standard sizes, the high-current types are fitted with a split plunger. During contacting, both parts of the plunger are pressed against each other and, as a result, against the barrel wall. The resulting increased contact with the barrel wall and the overall greater contact surface mean that the test probe can be subjected to higher currents, depending on the series, of 16 A to 50 A. These probes can be used even when very low and constant resistance values are required.


Credit(s)
Supplied By: Wiltron Agencies
Tel: +27 12 940 9475
Fax: 086 684 7506
Email: wiltron@global.co.za
www: www.wiltron-agencies.co.za
  Follow us on Facebook Share via Twitter Share via LinkedIn    

Further reading:

  • Terminal Blocks and Multi Connector Systems
    15 November 2017, Wiltron Agencies, Technical Literature
    From PTR comes this compendium of the company’s extensive range of terminal blocks and multi-connector systems; the latter comprise a pin strip which is mounted onto a PCB as well as a terminal block ...
  • Enhancements to handheld RF/microwave analysers
    15 November 2017, Concilium Technologies, Test & Measurement
    Keysight Technologies announced new enhancements for its FieldFox handheld RF and microwave analysers. The instruments now connect to Keysight’s 89600 VSA software, the industry’s leading toolset for ...
  • Measurement data management software
    15 November 2017, National Instruments, Test & Measurement
    National Instruments has announced the release of the Data Management Software Suite, an enterprise software solution offering a complete workflow to standardise measurement data across teams, mine that ...
  • GPS disciplining for field testing – Part 2
    15 November 2017, Lambda Test, Test & Measurement
    The first part of this article, covering the fundamental principles of GPS clock frequency disciplining, was published in the 11 October 2017 issue of Dataweek. This second and final part covers the ins ...
  • Test probes catalogue
    11 October 2017, Wiltron Agencies, Technical Literature
    Running to 194 pages, the latest edition of PTR’s Test Probes catalogue features up-to-date information covering the company’s test probes and accessories. Technical information is provided for the full ...
  • Three-hole power transducer
    11 October 2017, Denver Technical Products, Test & Measurement
    The APT-TH series power transducers from NK Technologies monitor Watt consumption of three-phase loads, and provide an analog signal proportional to the active power consumed by the monitored load. The ...
  • PXIe microwave signal generator
    11 October 2017, Concilium Technologies, Test & Measurement
    Keysight Technologies announced the industry’s first scalable PXIe microwave signal generator with frequency coverage up to 44 GHz and modulation bandwidth up to 1 GHz for generating complex waveforms ...
  • XJTAG updates boundary scan software
    11 October 2017, ASIC Design Services, Test & Measurement, Design Automation
    XJTAG has launched a major update to its flagship software, XJDeveloper. XJTAG’s unified test and programming IDE, XJDeveloper, is a development and debug environment that makes it quick and easy to set ...
  • GPS disciplining for field testing
    11 October 2017, Lambda Test, Test & Measurement
    One of the challenges synchronisation engineers and technicians often face in the field, is the lack of proper frequency and timing (phase) references required to validate 1PPS clocks’ accuracy and stability ...
  • Precision current loop calibrator
    11 October 2017, Comtest, Test & Measurement
    The Fluke 709 and 709H mA loop calibrators are specifically designed to save time and produce high-quality results. Built around a user-friendly interface with a quick-set rotary encoder knob, this tool ...
  • Selecting test instrumentation for battery temperature profiling
    11 October 2017, Concilium Technologies, This Week's Editor's Pick, Test & Measurement
    Charge and discharge currents increase the temperature of batteries and temperature directly affects their lifespan and storage capacity. Batteries tend to be efficient and provide a normal life span ...
  • Step probe with splayed tip
    11 October 2017, Electronic Industry Supplies, Test & Measurement
    The new step probe series T-785 M with a splayed tip, from German test probe and fixture specialist Ingun, enables reliable testing of clips and jacks. Wear-free contacting is achieved via the outer ...

 
 
         
Contact:
Technews Publishing (Pty) Ltd
1st Floor, Stabilitas House
265 Kent Ave, Randburg, 2194
South Africa
Publications by Technews
Dataweek Electronics & Communications Technology
Electronic Buyers Guide (EBG)

Hi-Tech Security Solutions
Hi-Tech Security Business Directory

Motion Control in Southern Africa
Motion Control Buyers’ Guide (MCBG)

South African Instrumentation & Control
South African Instrumentation & Control Buyers’ Guide (IBG)
Other
Terms & conditions of use, including privacy policy
PAIA Manual





 

         
    Classic | Mobile

Copyright © Technews Publishing (Pty) Ltd. All rights reserved.