mobile | classic
Dataweek Electronics & Communications Technology Magazine





Follow us on:
Follow us on Facebook Share via Twitter Share via LinkedIn


Search...

Electronics Buyers' Guide

Electronics Manufacturing & Production Handbook 2017


 

Optical spectrum analyser for in-service network testing
21 February 2018, Test & Measurement

The FTBx-5255 optical spectrum analyser (OSA) module was released by EXFO for field applications to meet the live network testing needs of telecom service providers, Internet content providers and network equipment manufacturers all under pressure to deliver flawless services to a high-speed, data-hungry market.

The device obviates the need to interrupt communications by shutting down networks or channels to measure the optical signal-to-noise ratio (OSNR) of 100G/200G/400G (Pol-Mux) signals, a key performance indicator of customers’ quality of service. With the new OSA, service providers and data centres can stay live for in-service network testing of OSNR from 10G to 400G; O-band pluggable and L-band transceivers; and CWDM spectral analysis, among other applications. The capability to address all these OSA testing applications will also appeal to NEMs, in particular the system verification and system testing groups.

The FTBx-5255 is available in EXFO’s FTB-2, FTB-2 Pro and FTB-4 Pro portable test platforms as well as in the LTB-8 platform for rackmount and lab applications.

For more information contact Chris Nel, Lambda Test Equipment, +27 (0)12 349 1341, chris@lambdatest.co.za, www.lambdatest.co.za


Credit(s)
Supplied By: Lambda Test
Tel: +27 12 349 1341
Fax: +27 12 349 1493
Email: chris@lambdatest.co.za, ockie@lambdatest.co.za
www: www.lambdatest.co.za
  Share on Facebook Share via Twitter Share via LinkedIn    

Further reading:

  • Software for PXI test instruments
    18 July 2018, Test & Measurement
    National Instruments announced the release of its InstrumentStudio software for NI PXI modular instruments. InstrumentStudio improves the live, interactive use model for modular instruments and makes ...
  • Flying probe tester
    18 July 2018, MyKay Tronics, Manufacturing / Production Technology, Hardware & Services, Test & Measurement
    The Flying Probe S2 testers from SPEA are designed for the highly demanding test requirements of today’s electronics. Their entire force/measurement unit has been placed directly on the axis, so that ...
  • Software for distributed systems management
    13 June 2018, Test & Measurement
    National Instruments announced the release of SystemLink application software for distributed systems management. SystemLink helps improve operational efficiency and decrease maintenance costs through ...
  • DFT assistant for Mentor Xpedition
    13 June 2018, ASIC Design Services, Test & Measurement
    Developed by XJTAG, the free XJTAG DFT Assistant for the Mentor Xpedition Designer product increase the design for test (DFT) and debug capabilities of the schematic capture and PCB design environment. ...
  • The path to 5G requires a strong optical network
    13 June 2018, Lambda Test, Telecoms, Datacoms, Wireless, Test & Measurement
    5G mobile communications networks will be based on virtualised architecture – specifically, a network functions virtualisation (NFV) standard – which is an evolution of the centralised radio access network ...
  • Wi-Fi-connected fibre-optic inspection system
    13 June 2018, Comtest, Test & Measurement
    Comtest’s latest offering from AFL is the aeRos connected FOCIS WiFi2, a next-generation fibre-optic connector inspection system that uses an Android or iOS wireless connection for live image video streaming, ...
  • 4-in-1 SOLT calibration kits
    13 June 2018, RF Design, Test & Measurement
    Pasternack has released a new line of 3,5 mm calibration kits for test and measurement, field testing, antenna measurement and cable verification applications. The new series consists of two models, ...
  • Why fibre connector inspection matters
    13 June 2018, Comtest, Test & Measurement
    Search the Internet for ‘fibre-optic connector inspection’ and you will certainly see a lot of information from just about every company you associate with fibre-optic communications. Everyone in the ...
  • LabVIEW 2018 released
    13 June 2018, Test & Measurement
    A new release of National Instruments’ LabVIEW software has been built with the aim of giving engineers new tools that simplify system integration and grant more control through hardware accessibility. ...
  • Current clamp for on-off control
    13 June 2018, Denver Technical Products, Test & Measurement
    Universal Technic is offering a new current clamp for on-off control. The model M4.TOR provides an open contact up to the threshold of 1 A and will close from 1 A to 300 A; other detection ranges are ...
  • Software for PXI test instruments
    13 June 2018, Test & Measurement
    National Instruments announced the release of its InstrumentStudio software for NI PXI modular instruments. InstrumentStudio improves the live, interactive use model for modular instruments and makes ...
  • Software platform for simulation, design and testing
    16 May 2018, Concilium Technologies, Test & Measurement
    Keysight Technologies recently unveiled PathWave, a software platform that integrates design, test, measurement and analysis. As a result, PathWave enables customers to accelerate innovation and product ...

 
 
         
Contact:
Technews Publishing (Pty) Ltd
1st Floor, Stabilitas House
265 Kent Ave, Randburg, 2194
South Africa
Publications by Technews
Dataweek Electronics & Communications Technology
Electronic Buyers Guide (EBG)

Hi-Tech Security Solutions
Hi-Tech Security Business Directory

Motion Control in Southern Africa
Motion Control Buyers’ Guide (MCBG)

South African Instrumentation & Control
South African Instrumentation & Control Buyers’ Guide (IBG)
Other
Terms & conditions of use, including privacy policy
PAIA Manual





 

         
    Classic | Mobile

Copyright © Technews Publishing (Pty) Ltd. All rights reserved.