A Zigbee solution is now available for Nordic Semiconductor’s nRF52840 multiprotocol SoC, with the aim of expanding its portfolio of mesh networking solutions for smart home, enterprise and industry. The first engineering release is available now, with a production grade, Zigbee 3.0 certified release planned for the second half of 2018.
As with Nordic’s other mesh solutions, this enables concurrent Zigbee 3.0 operation with Bluetooth Low Energy using the S140 v6.0 SoftDevice. Nordic’s multiprotocol solution for the nRF52840 SoC enables use cases that take advantage of several wireless technologies. Examples include interaction with a Zigbee smart lighting network from a smartphone via Bluetooth 5, or a Zigbee security network using Bluetooth beacons for location identification. The SDK includes several examples including concurrent operation of Zigbee and Bluetooth 5 for a smart light bulb and switch.
Zigbee Alliance is a global, standards-based wireless solution that takes advantage of the IEEE 802.15.4 PHY and operates globally in 2,4 GHz unlicensed bands (and other frequency bands in some geographical zones). Raw data throughput rates of 250 Kbps can be achieved at 2,4 GHz
(16 channels) and transmission distances range from 10 to 100 metres, depending on power output and environmental characteristics. The technology supports large mesh networks (which allow nodes to relay messages to other nodes) and low-power operation for extending battery life.
Antennas to meet all connectivity requirements Electrocomp
Telecoms, Datacoms, Wireless, IoT
Kyocera AVX RF antennas meet today’s connectivity demands in the LTE, Wi-Fi, Bluetooth, GNSS, and ISM wireless bands, available in surface mount, patch or external configurations.
Read more...Introducing SIMCom’s new A7673X series Otto Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat 1 bis module that supports LTE-FDD, with a maximum downlink rate of 10 Mbps and an uplink rate of 5 Mbps.
Read more...18 W monolithic microwave amplifier RFiber Solutions
Telecoms, Datacoms, Wireless, IoT
The CHA8612-QDB is a two stage, high-power amplifier operating between 7,9 and 11 GHz. The monolithic microwave amplifier can typically provide 18 W of saturated output power and 40% of power-added efficiency.
Read more...LoRaWAN-certified sub-GHz module Altron Arrow
Telecoms, Datacoms, Wireless, IoT
The STM32WL5M from ST Microelectronics is the company’s first LoRaWAN-certified module which incorporates two cores, one of them being a wireless stack to optimise the creation of sub-GHz applications.
Read more...3D depth sensing sensor Avnet Silica
Telecoms, Datacoms, Wireless, IoT
A recent announcement by STMicroelectronics has revealed an all-in-one, direct Time-of-Flight (dToF) 3D LiDAR (Light Detection And Ranging) module with 2,3k resolution.
Read more...Nordic expands nRF91 series RF Design
DSP, Micros & Memory
Nordic Semiconductor has announced the expansion of its nRF91 series cellular IoT devices with the introduction of the nRF9151 System-in-Package (SiP).
Read more...Quectel announces module for RedCap comms Quectel Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
The Quectel RG255G offers downlink performance of 220 Mbps, and uplink performance of 121 Mbps on 256QAM or 91 Mbps on 64QAM.
Read more...Wide-Bandgap Developer Forum Infineon Technologies
Telecoms, Datacoms, Wireless, IoT
This year marks a new chapter for this exclusive event series – all specialist presentations will be broadcasting live from a studio in Munich.
Read more...Multimode smart LTE module with GNSS Quectel Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
The AW200Z LTE module is equipped with Bluetooth and Wi-Fi functionalities, and is powered by Qualcomm's advanced 64-bit quad-core Cortex-A53 processors, coupled with an integrated Adreno 702 GPU.
Read more...LEXI-R10 series cellular module RF Design
Telecoms, Datacoms, Wireless, IoT
The LEXI-R10 Series from u-blox are LTE Cat 1 bis modules that support multi-band LTE-FDD, and are designed for size-constrained devices.
printer friendly version