|
|
Multi-channel power analyser
10 October 2018, Test & Measurement
Magnet’s range of Carlo Gavazzi products includes WM50 multi-channel power analysers, which efficiently measure main electrical variables, as well as voltage and current harmonic distortions, in a three- or single-phase system.
“This flexible device is able to view total and partial active and reactive energy consumption; up to three water, gas and heat totalisers and up to six different energy consumption tariffs,” says Stephen Rogerson, Magnet’s Johannesburg regional manager. “This system, which provides up to 16 alarms, can be integrated with accessory modules to expand its control and communication capacity. Main unit functions are increased with the addition of a maximum of two modules, which include a digital input/output module, an analog input module and a communication module.”
Three analog inputs and six digital inputs and digital outputs are managed via an optional accessory module. This system is able to transmit data to other systems and is also used to log measurements and events.
The WM50 device has been designed for quick configuration and easy installation. Detachable terminals connect to 12-channel current sensors with proprietary cables and clips are supplied with sensors to ensure efficient operation at all times. The wide backlit LED display clearly shows single and total load measurements, as well as configuration parameter values. Digital communication between current sensors and the device ensures excellent disturbance immunity.
Magnet’s range of Carlo Gavazzi automation products also includes energy management solutions, including energy meters, current transformers and energy-efficiency monitoring solutions.
For more information contact Samantha MacDonald, Magnet, +27 31 274 1998, samantham@magnetgroup.co.za, www.magnetgroup.co.za |
|
|
| Share: |
 |
Via email client |
 |
 |
 |
 |
print |
|
|
|
|
|
Further reading:
- Consider renting versus buying test equipment
10 October 2018, Coral-i Solutions , This Week's Editor's Pick, Test & Measurement
Coral-i Solutions weighs the benefits of renting versus buying, and the equipment available within the company’s rental pool.
- Multi-fibre testing tool
10 October 2018, Lambda Test, Test & Measurement
Exfo has developed an automated solution that combines testing of polarity, continuity and connector cleanliness – the critical tests needed to validate multi-fibre push-on (MPO/MTP) links – into a single ...
- 2x2 MIMO measurement function for WLAN equipment
10 October 2018, Coral-i Solutions , Test & Measurement
Anritsu has launched a new 2x2 MIMO measurement software MX886200A-010 option for the wireless connectivity test set MT8862A. This latest release extends the measurement functions of the MT8862A to offer ...
- Trends in oscilloscope technologies
10 October 2018, Comtest, Test & Measurement
The faster and more complex electronic circuits become, the greater the performance requirements are for the equipment with which to test and verify their performance. At the same time, the smartphone ...
- Test and measurement instrumentation amplifiers
10 October 2018, Conical Technologies, Test & Measurement
The MPA range of high-quality test and measurement instrumentation amplifiers from Maury Microwave are not only used in load-pull systems but are also ideally suited for lab and test range testing setups.
With ...
- Three-phase power quality loggers
10 October 2018, Comtest, Test & Measurement
Comtest is offering Fluke’s range of three-phase power quality loggers – model numbers 1742, 1746 and 1748 - giving users fast, easy access to the data they need to make critical power quality and energy ...
- 100 Gbps optical transceiver
10 October 2018, Conical Technologies, Test & Measurement
Finisar announced that it is in full production of its 100G shortwave wavelength division multiplexing (SWDM) optical transceiver. The pluggable QSFP28 transceiver is the first mass-produced module capable ...
- Real-time EMF monitoring system
12 September 2018, Conical Technologies, Test & Measurement
Microwave Vision Group (MVG) launched the new EME SPY Evolution, a state-of-the-art continuous EMF exposure monitoring system for monitoring personal exposure to electromagnetic fields and identification ...
- EMC pre-compliance test system
12 September 2018, Comtest, Test & Measurement
On offer from Comtest is the latest Tektronix all-in-one solution for EMI/EMC pre-compliance testing and troubleshooting, the EMCVu.
The system gives engineers an accurate, convenient and cost-effective ...
- Multi-channel power analyser
12 September 2018, Test & Measurement
Magnet’s range of Carlo Gavazzi products includes WM50 multi-channel power analysers, which efficiently measure main electrical variables, as well as voltage and current harmonic distortions, in a three- ...
- DIY vector network analyser
18 July 2018, Conical Technologies, Test & Measurement
At the recent International Microwave Simposium 2018, Mini-Circuits demonstrated a do-it-yourself vector network analyser kit. Aimed at students, the UVNA-63 was designed to bridge the gap between textbook ...
- Spectrum analyser with advanced logging features
15 August 2018, Comtest, Test & Measurement
Troubleshooting RF interference can be a lengthy process. At the very least, it requires a spectrum analyser to identify what is occurring on or near your frequency. Using a conventional spectrum analyser, ...
|
|
