Power Electronics / Power Management


Contenders for the future king of battery technologies

13 June 2018 Power Electronics / Power Management

The increased need for low-cost and large-scale storage of electricity from renewable sources has led to a new wave of research on advanced battery technology.

The current king of the hill is still lead-acid. It’s the cheapest and most stable when compared to the other chemistries.

Lead-acid batteries are a tried and tested technology that has been used in off-grid energy systems for decades. If you want to go off the grid and need lots of energy storage, lead-acid is still the best option. However, the search is on for innovative battery technology, be it for an increase in your smartphone battery lifespan or a storage bank for the electrical power you harvest from renewable sources such as solar, wind, water, etc.

Best of the rest

So, lead-acid claims the current king of the hill top spot for renewable energy storage, but what else looks promising for the future? Without a doubt, lithium-ion (Li-ion) is perhaps a future contender for the coveted top spot. It is a promising battery chemistry and low maintenance – an advantage for sure. There is no ‘memory’ effect and no scheduled cycling is required to prolong the battery’s life.

From cellphones and laptops to electric vehicles, lithium-ion batteries are the power source that fuel everyday applications.

However, safety and price are still a drawback, but manufacturers are constantly improving the chemistry of the Li-ion battery to develop a cheaper, safer battery.

The traditional lithium-ion battery has given birth to a variety of other advanced lithium batteries. The lithium-sulphur battery is such an example. The lithium-sulphur battery has been hailed as the next generation of batteries to replace the current lithium-ion variety. Lithium-sulphur batteries are more cost-effective and energy-dense than lithium-ion batteries. A contender perhaps? We wait and see.

The more recently developed lithium-air battery in the lithium-ion battery family could be our next revolutionary technology. It has the potential to hold up to five times more energy than the lithium-ion batteries that power our everyday devices. The batteries work by combining lithium present in the anode with oxygen from the air to produce lithium peroxide on the cathode during the discharge phase. The lithium peroxide is broken down into its lithium and oxygen components during the charge phase. However, several obstacles have plagued this development and there is still more work to be done to commercialise this type of battery. A future contender perhaps, but not just yet.

There have also been some developments in the water-based batteries. Stanford University researchers have developed a water-based battery that could provide a cheap way to store wind or solar energy. The prototype manganese-hydrogen battery stands just three inches tall and generates 20 milliwatt-hours of electricity. It’s a long way off but, if perfected, could challenge the price of the current king of the hill. Research is still in progress to find new ways to achieve low-cost, long-lasting, utility-scale batteries of the water-based variety.

In the now booming power and energy industry, there has been a high degree of fragmentation in the global supercapacitor market. In Australia, a new project is underway to develop hybrid supercapacitors into power rolling stock with high energy and power densities, and advanced supercapacitor management systems.

S.J. Andrews Electronics is a leading supplier of lead-acid batteries, including the full range of Forbatt lead-acid and other chemistries.
S.J. Andrews Electronics is a leading supplier of lead-acid batteries, including the full range of Forbatt lead-acid and other chemistries.

The supercapacitors are believed to have the potential to revolutionise the rail industry – these technologies could reduce the need for overhead electrical infrastructure and aid the future development of hybrid-powered trains. The new technology will effectively provide voltage stabilisation for rail systems; advancing the locomotive engine starting technologies and improving the performance of propulsion for light rail vehicles.

There you have it, the current winner and a promising fight for the renewables and energy storage industry. At the end of the day, it’s the best kind of fight there is because the winner is the future generations that will have affordable, renewable power for their next great leap in the human race.

Article by S.J. Andrews, a leading supplier of lead-acid batteries including the full range of Forbatt lead-acid and other chemistries, electronics components, lighting solutions and all things electronic.

For more information contact S.J. Andrews Electronics, +27 11 444 1521, sjandrew@icon.co.za, www.sjandrews.co.za





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Local procurement should be top of mind in mine-owned solar power projects
Power Electronics / Power Management
Recent changes in government legislation have enabled businesses to develop up to 100 MW energy plants with very little red tape.

Read more...
The next big shift in SA's energy infrastructure
Power Electronics / Power Management
High-voltage (HV) LiFePO4 battery energy storage systems, commonly referred to as BESS, which drastically improve the power reliability prospects for businesses, have been around for some time, but expect to see a massive surge in 2024.

Read more...
Multi-channel electronic load series
Conical Technologies Power Electronics / Power Management
ITECH has recently announced the release of their upgraded IT8700P+ series multi-channel electronic loads. This new series supports master-slave parallel configuration between all the modules, allowing for different modules to be mixed and matched for synchronisation.

Read more...
Self-extinguishing batteries
Power Electronics / Power Management
The most commonly used electrolyte, which is highly combustible – a medium composed of a lithium salt and an organic solvent – is replaced with materials found in a commercial fire extinguisher.

Read more...
Input power bus conditioners
Accutronics Power Electronics / Power Management
The FLHG-60 and the FLHGI-60 are designed to be used as the front-end to the company’s MGDD N input series, to develop full power solutions.

Read more...
Isolated power module with high efficiency
RS South Africa Power Electronics / Power Management
The new MagI3C-FISM power module, with an integrated switching power stage, is 100% pin-to-pin compatible with the previous versions.

Read more...
Hi-Rel DC-DC converter
Accutronics Power Electronics / Power Management
The MGDD-06 series from GAÏA Converter is an ultra-wide input 6 W family of power converter modules, with a permanent input voltage range of 9 to 160 V DC.

Read more...
Energy measurement IC
CST Electronics Power Electronics / Power Management
The SY7T501 and SY7T502 are Silergy’s newest energy measurement ICs for cost-sensitive IoT applications such as smart-plugs, dimmers, power-strips, intelligent lighting, and other points of load.

Read more...
Reference design: USB-C PD and Qi charging
Power Electronics / Power Management
Infineon’s REF_TX15W_PD60W_N1 is the industry’s first turnkey solution to offer a PD and Qi multi-charger, allowing same-time charging via the USB-PC PD port and the Qi wireless power transmitter.

Read more...
SMD varistors with huge surge current capability
Electrocomp Power Electronics / Power Management
TDK Corporation has introduced two new varistor series in SMD design, the larger of the two capable of handling a surge current of 10 000 A.

Read more...