mobile | classic
Dataweek Electronics & Communications Technology Magazine





Follow us on:
Follow us on Facebook Share via Twitter Share via LinkedIn


Search...

Electronics Buyers' Guide

Electronics Manufacturing & Production Handbook 2017


 

Fibre-optic test set
31 August 2011, Test & Measurement

New from JDSU is the T-BERD/MTS-2000, a compact, modular test set that is capable of conducting a wide range of test applications for virtually every type of optical fibre network.

Built for user simplicity and mobility, the device enables users to perform hands-free testing to improve workflow.

Test capabilities include a range of OTDR modules for multimode and single-mode testing, as well as a host of FiberComplete modules for automated insertion loss/optical return loss and fault finding; both OTDR and FiberComplete modules are passive optical network (PON) optimised. The unit is also ready for connector end-face pass/fail analysis to IEC standards with a digital analysis microscope. The PON power meter and CWDM-OSA modules also enable turn-up and troubleshooting of PON and coarse wavelength division multiplexing (CWDM) networks.

The T-BERD/MTS-2000 is not only FTTx/PON-ready but is also compatible with JDSU’s SmartOTDR and P5000i digital inspection analysis solutions.


Credit(s)
Supplied By: Concilium Technologies
Tel: +27 12 678 9200
Fax: +27 12 665 4160
Email: info@concilium.co.za
www: www.concilium.co.za/tm
  Share on Facebook Share via Twitter Share via LinkedIn    

Further reading:

  • Software for PXI test instruments
    18 July 2018, Test & Measurement
    National Instruments announced the release of its InstrumentStudio software for NI PXI modular instruments. InstrumentStudio improves the live, interactive use model for modular instruments and makes ...
  • Flying probe tester
    18 July 2018, MyKay Tronics, Manufacturing / Production Technology, Hardware & Services, Test & Measurement
    The Flying Probe S2 testers from SPEA are designed for the highly demanding test requirements of today’s electronics. Their entire force/measurement unit has been placed directly on the axis, so that ...
  • Software for distributed systems management
    13 June 2018, Test & Measurement
    National Instruments announced the release of SystemLink application software for distributed systems management. SystemLink helps improve operational efficiency and decrease maintenance costs through ...
  • DFT assistant for Mentor Xpedition
    13 June 2018, ASIC Design Services, Test & Measurement
    Developed by XJTAG, the free XJTAG DFT Assistant for the Mentor Xpedition Designer product increase the design for test (DFT) and debug capabilities of the schematic capture and PCB design environment. ...
  • The path to 5G requires a strong optical network
    13 June 2018, Lambda Test, Telecoms, Datacoms, Wireless, Test & Measurement
    5G mobile communications networks will be based on virtualised architecture – specifically, a network functions virtualisation (NFV) standard – which is an evolution of the centralised radio access network ...
  • Wi-Fi-connected fibre-optic inspection system
    13 June 2018, Comtest, Test & Measurement
    Comtest’s latest offering from AFL is the aeRos connected FOCIS WiFi2, a next-generation fibre-optic connector inspection system that uses an Android or iOS wireless connection for live image video streaming, ...
  • 4-in-1 SOLT calibration kits
    13 June 2018, RF Design, Test & Measurement
    Pasternack has released a new line of 3,5 mm calibration kits for test and measurement, field testing, antenna measurement and cable verification applications. The new series consists of two models, ...
  • Why fibre connector inspection matters
    13 June 2018, Comtest, Test & Measurement
    Search the Internet for ‘fibre-optic connector inspection’ and you will certainly see a lot of information from just about every company you associate with fibre-optic communications. Everyone in the ...
  • LabVIEW 2018 released
    13 June 2018, Test & Measurement
    A new release of National Instruments’ LabVIEW software has been built with the aim of giving engineers new tools that simplify system integration and grant more control through hardware accessibility. ...
  • Current clamp for on-off control
    13 June 2018, Denver Technical Products, Test & Measurement
    Universal Technic is offering a new current clamp for on-off control. The model M4.TOR provides an open contact up to the threshold of 1 A and will close from 1 A to 300 A; other detection ranges are ...
  • Software for PXI test instruments
    13 June 2018, Test & Measurement
    National Instruments announced the release of its InstrumentStudio software for NI PXI modular instruments. InstrumentStudio improves the live, interactive use model for modular instruments and makes ...
  • Software platform for simulation, design and testing
    16 May 2018, Concilium Technologies, Test & Measurement
    Keysight Technologies recently unveiled PathWave, a software platform that integrates design, test, measurement and analysis. As a result, PathWave enables customers to accelerate innovation and product ...

 
 
         
Contact:
Technews Publishing (Pty) Ltd
1st Floor, Stabilitas House
265 Kent Ave, Randburg, 2194
South Africa
Publications by Technews
Dataweek Electronics & Communications Technology
Electronic Buyers Guide (EBG)

Hi-Tech Security Solutions
Hi-Tech Security Business Directory

Motion Control in Southern Africa
Motion Control Buyers’ Guide (MCBG)

South African Instrumentation & Control
South African Instrumentation & Control Buyers’ Guide (IBG)
Other
Terms & conditions of use, including privacy policy
PAIA Manual





 

         
    Classic | Mobile

Copyright © Technews Publishing (Pty) Ltd. All rights reserved.