Telecoms, Datacoms, Wireless, IoT


Embedded 3G solution

31 August 2011 Telecoms, Datacoms, Wireless, IoT

To enable developers to take advantage of the vast improvements in South African data network coverage and performance over traditional land-line options, Otto Wireless Solutions recently launched its MP2A-5220 solution to the market.

The MP2A-5220 has an integrated PCI express mini card which provides multimode and multiband connectivity to the GSM/GPRS/EDGE/UMTS/WCDMA wireless networks. The device supports WCDMA HSDPA connectivity up to 7,2 Mbps and HSUPA up to 5,76 Mbps. The integrated mini card also has an onboard GPS receiver which offers full GPS functionality, continuously tracking all satellites in view and providing accurate satellite position data. It supports A-GPS as well as standalone-GPS.

This solution gives integrators and OEMs the opportunity to install an internal and secure data card inside a conventional PC or server and access wireless 3G connectivity on any GSM network, depending on the SIM card being used. This solution is not locked to any specific network, so the user has the freedom to choose which network gives them the best coverage and lowest data costs in their specific location.

In certain rural areas, where landlines are non-existent, this solution can provide high-speed wireless 3G Internet connectivity. The solution is installed into the standard PCIe slot on a PC motherboard and can be configured via most Windows operating systems. The system is well suited for PCs used in a point of sale environment, where a conventional 3G USB modem could easily be misplaced or stolen. The mini card is fastened securely to the inside of the PC or server, making access to the modem difficult.

The MP2A-5220 kit consists of the MP2A-5220 3G PCIe card, two 3G antennas, two RF antenna pigtails and a USB2.0 cable.

For more information contact Chris Viveiros, Otto Wireless Solutions, +27 (0)11 791 1033, [email protected], www.otto.co.za





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Full sensor to cloud solution
CST Electronics Telecoms, Datacoms, Wireless, IoT
NeoCortec has demonstrated the seamless and rapid development of full sensor-to-cloud solutions using NeoMesh Click boards from MikroE and the IoTConnect cloud solution from Avnet.

Read more...
Long-range Wi-Fi HaLow module
TRX Electronics Telecoms, Datacoms, Wireless, IoT
One of Mouser’s newest products is the Morse Micro MM6108-MF08651-US Wi-Fi HaLow Module, which adheres to the IEEE 802.11ah standard.

Read more...
Quectel launches 3GPP NTN comms module
Quectel Wireless Solutions Telecoms, Datacoms, Wireless, IoT
Quectel Wireless Solutions has announced the Quectel BG95-S5 3GPP non-terrestrial network (NTN) satellite communication module.

Read more...
SIMCom’s A7673x series
Otto Wireless Solutions Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat.1 bis module based on the ASR1606 chipset, that supports wireless communication modes of LTE-FDD, with a maximum downlink rate of 10 Mbps and a maximum uplink rate of 5 Mbps.

Read more...
Accelerating the commercialisation of the 5G IoT markets
Altron Arrow Editor's Choice Telecoms, Datacoms, Wireless, IoT
Fibocom unveils Non-Terrestrial Networks (NTN) module MA510-GL, enabling satellite and cellular connectivity to IoT applications.

Read more...
Long-range connectivity module
Avnet Silica Telecoms, Datacoms, Wireless, IoT
Digi XBee XR 868 RF Modules support the deployment of long-range connectivity applications, and support point-to-point and mesh networking protocols.

Read more...
4G LTE-M/NB-IoT connectivity reference design
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Developed around the industry-leading Nordic nRF9160 module, the platform comes complete with a newly-developed LTE antenna, ATRIA, which is pre-certified to operate over the full LTE-M and NB-IoT bands.

Read more...
Antennas to meet all connectivity requirements
Electrocomp Telecoms, Datacoms, Wireless, IoT
Kyocera AVX RF antennas meet today’s connectivity demands in the LTE, Wi-Fi, Bluetooth, GNSS, and ISM wireless bands, available in surface mount, patch or external configurations.

Read more...
Introducing SIMCom’s new A7673X series
Otto Wireless Solutions Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat 1 bis module that supports LTE-FDD, with a maximum downlink rate of 10 Mbps and an uplink rate of 5 Mbps.

Read more...
18 W monolithic microwave amplifier
RFiber Solutions Telecoms, Datacoms, Wireless, IoT
The CHA8612-QDB is a two stage, high-power amplifier operating between 7,9 and 11 GHz. The monolithic microwave amplifier can typically provide 18 W of saturated output power and 40% of power-added efficiency.

Read more...