Passive Components


Gate-drive transformers

31 August 2011 Passive Components

TDK-EPC has developed a new series of EPCOS EP5 SMT pulse transformers.

They are used to couple gate-drive circuits to MOSFETs and IGBTs operating at switching frequencies within a range of 150 kHz to several MHz. These transformers are available with a wide range of turns ratios, polarities and outputs.

Thanks to the use of miniaturised EP5 cores, the transformers have dimensions of only 8,1 x 6,7 x 5,4 mm. A special winding technology means that parasitic capacitances between windings are only 25 to 95 pF, depending on the type. Stray inductances are similarly low as they range between 0,9 and 2,5 μH. Short-term dielectric strength is tested to 1500 V d.c. for all types of the B82804A* series. These components are designed for ambient temperatures of up to 85°C and operating temperatures of up to 125°C. Their terminal configuration and pin assignment correspond to the industry standard.

The main applications of these new transformers are half- and full-bridge converters, as well as in frequency converters or inverters.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Antennas to meet all connectivity requirements
Electrocomp Telecoms, Datacoms, Wireless, IoT
Kyocera AVX RF antennas meet today’s connectivity demands in the LTE, Wi-Fi, Bluetooth, GNSS, and ISM wireless bands, available in surface mount, patch or external configurations.

Read more...
Stainless steel pushbutton enclosures
Electrocomp Enclosures, Racks, Cabinets & Panel Products
he HYPB series from Hammond is a hygienic type 4X stainless steel pushbutton enclosure designed for use in environments where regular high temperature, high-pressure washdowns are required.

Read more...
SMD varistors with huge surge current capability
Electrocomp Power Electronics / Power Management
TDK Corporation has introduced two new varistor series in SMD design, the larger of the two capable of handling a surge current of 10 000 A.

Read more...
Inductor supports temperatures up to 150°C
RS South Africa Passive Components
TDK has launched a highly durable inductor for automotive A2B applications that supports a wide temperature range of -55 up to 150°C.

Read more...
Long-range passive infrared motion sensor
Future Electronics Passive Components
Panasonic Industry (PaPIRs) recently introduced he world’s most compact long-range passive infrared motion sensor, for installation heights of up to 15 metres.

Read more...
Isolated solid state relay
Altron Arrow Passive Components
The ISO808, ISO808-1 (PowerSO-36) and ISO808Q, ISO808Q-1 (TFQFPN32) are galvanic isolated eight-channel drivers featuring a low supply current.

Read more...
Low-profile power inductors
RS South Africa Passive Components
TDK Corporation has announced the introduction of its new PLEA85 series of high-efficiency power inductors developed for battery-powered wearables and other devices.

Read more...
Miniature capacitor for automotive applications
Avnet Abacus Passive Components
Murata has released its LLC series of multi-layer ceramic capacitors for automotive applications, that feature a reversed termination for low ESL.

Read more...
Sealed tantalum capacitors
Electrocomp Passive Components
With an operating temperature range of -55 to 125°C, with voltage derating, these capacitors have been designed especially for avionics and aerospace applications.

Read more...
Double metallised polypropylene capacitors
Future Electronics Passive Components
The Electrocube 985B series offers high-frequency operation, high current and low ESR in a miniature package.

Read more...