Test & Measurement


Sensors for vibration analysis

27 June 2012 Test & Measurement

Monitran has launched six new ranges of general-purpose industrial sensors for vibration analysis. High accuracy, quick recovery from shock loading, and high immunity from electrical noise make these new sensors suitable for a variety of applications within several industrial sectors. The units are supplied as top- or side-entry and with integral cables and connectors. Submersible and intrinsically safe versions are also available.

Devices in the new 2200 range are ideal for vibration analysis. As standard, they operate between ±80 G, have a rapid response to shock loading and can withstand forces in excess of 10 000 G. The sensors have isolated AC outputs with sensitivities of 100 V/G, with alternate sensitivities available on request. In addition, they offer good bias voltage stability with typical drift no more than 3 mV/° with a bias voltage of 11,6 V.

A second new range, the 2300 series, comprises dual output devices. Here, sensors replicate AC output for vibration analysis of the 2200 range, but also have an output proportional to temperature (at 10 mV/°C, a de facto standard sensitivity for many data-loggers).

For monitoring velocity, Monitran’s third new range, the 2285 series, features devices with DC outputs (4–20 mA) proportional to RMS velocity, with outputs proportional to peak velocity available on request. These are ideal for providing machine/plant protection by allowing monitored velocity (i.e. speed of vibration) levels to be included within a condition-based predictive maintenance strategy. The maximum sensitivity is typically 0 to 100 mm/s. By incorporating full internal screening within the 2285 range, potential earth loop problems are eliminated and installation is simplified.

The fourth range of sensors is the Monitran 2287 series, offering the same features as the 2285 series but with the DC output proportional to acceleration as opposed to velocity. RMS is standard but with peak as an option. The fifth and sixth ranges, series 2385 and 2387, add secondary outputs for temperature (10 mV/°C) to the 2285 and 2287 ranges.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Digitisers upgraded with pulse generator option
Vepac Electronics Test & Measurement
Spectrum Instrumentation has added the Digital Pulse Generator option to its ultrafast digitisers (with up to 10 GS/s speed) and arbitrary waveform generators.

Read more...
Network Master Pro to provide support of OpenZR+
Tamashi Technology Investments Test & Measurement
Anritsu Corporation has introduced the 400G (QSFP-DD) multi-rate module MU104014B that supports the new interface standard.

Read more...
Upgrade brings extra layer of detection to Fluke’s acoustic imagers
Comtest Test & Measurement
The firmware 5.0 update helps to boost efficiency and allows maintenance technicians to scan large areas quickly, and visually pinpoint technical issues before they become critical.

Read more...
Companies collaborate on EnviroMeter
Avnet Silica Test & Measurement
STMicroelectronics and Mobile Physics have joined forces to create EnviroMeter for accurate air-quality monitoring on smartphones. Time-of-flight optical sensing enables an accurate personal air quality monitor and smoke detector.

Read more...
PCB test points
Vepac Electronics Test & Measurement
Maintaining these access points in the final production versions will prove invaluable during the life of the equipment for service, adjustment, and debug, or repair activities.

Read more...
RFID reader
Test & Measurement
The EXA81 from Brady turns any smartphone or tablet into a personal radar that can pick up radio signals from all RFID-labelled items.

Read more...
Proximity sensor with VCSEL
Avnet Abacus Test & Measurement
Vishay’s newest small package proximity sensor, the VCNL36828P, combines low idle current with an I2C interface and smart dual slave addressing.

Read more...
CNH data output devices for AI applications
Altron Arrow Test & Measurement
STMicroelectronics’ CH family of time-of-flight sensor devices feature compact and normalised histogram (CNH) data output for artificial intelligence applications requiring raw data from a high-performance multizone ToF sensor.

Read more...
Webinar: The key to smart occupancy
Test & Measurement
This one-hour session will allow the attendee to discover the company’s latest infrared sensor with high-sensitivity presence and motion detection capabilities.

Read more...
Portable 100 MHz digital oscilloscope
Vepac Electronics Test & Measurement
The PeakTech P1331 is a powerful 100 MHz four-channel portable digital oscilloscope that is ideal for mobile use on a laptop, or for permanent installation in control cabinets.

Read more...