Conical Technologies has introduced into South Africa the Maynuo Electronics range of programmable electronic loads and power supplies with a competitive price/performance ratio.
Electronic loads are available in four different power rating configurations of 150/300 W, 600/1200 W, 1800/2400 W and 3600/6000 W. The units can be used in constant current (CC), constant voltage (CV), constant resistance (CR) and constant power (CW) mode and are fast and precise. They are controlled either through buttons and a jog wheel on the front, or through remote control for use in automated test systems. RS-232 is standard, while RS-485 and USB are available as options.
The DC power supplies are also ideally suited for automated test because of their remote control capabilities (RS-232 standard, RS-485 USB as options). Single-output units with 0–6 V/0–60 A, 0–
30 V/0–20 A, and 0–75 V/0–8 A offer an accuracy of load control of 0,01% +1 mV/0,1 mA and can also be used as a volt or milliohm meter.
Typical applications for the loads and power supplies include auto-mated production testing for power supplies, as well as engineering in the areas of automotive, process control, aerospace and alternative energy industries.
Read more...The next big shift in SA's energy infrastructure
Power Electronics / Power Management
High-voltage (HV) LiFePO4 battery energy storage systems, commonly referred to as BESS, which drastically improve the power reliability prospects for businesses, have been around for some time, but expect to see a massive surge in 2024.
Read more...Multi-channel electronic load series Conical Technologies
Power Electronics / Power Management
ITECH has recently announced the release of their upgraded IT8700P+ series multi-channel electronic loads. This new series supports master-slave parallel configuration between all the modules, allowing for different modules to be mixed and matched for synchronisation.
Read more...Self-extinguishing batteries
Power Electronics / Power Management
The most commonly used electrolyte, which is highly combustible – a medium composed of a lithium salt and an organic solvent – is replaced with materials found in a commercial fire extinguisher.
Read more...Input power bus conditioners Accutronics
Power Electronics / Power Management
The FLHG-60 and the FLHGI-60 are designed to be used as the front-end to the company’s MGDD N input series, to develop full power solutions.
Read more...Isolated power module with high efficiency RS South Africa
Power Electronics / Power Management
The new MagI3C-FISM power module, with an integrated switching power stage, is 100% pin-to-pin compatible with the previous versions.
Read more...Hi-Rel DC-DC converter Accutronics
Power Electronics / Power Management
The MGDD-06 series from GAÏA Converter is an ultra-wide input 6 W family of power converter modules, with a permanent input voltage range of 9 to 160 V DC.
Read more...Energy measurement IC CST Electronics
Power Electronics / Power Management
The SY7T501 and SY7T502 are Silergy’s newest energy measurement ICs for cost-sensitive IoT applications such as smart-plugs, dimmers, power-strips, intelligent lighting, and other points of load.
Read more...Reference design: USB-C PD and Qi charging
Power Electronics / Power Management
Infineon’s REF_TX15W_PD60W_N1 is the industry’s first turnkey solution to offer a PD and Qi multi-charger, allowing same-time charging via the USB-PC PD port and the Qi wireless power transmitter.
Read more...SMD varistors with huge surge current capability Electrocomp
Power Electronics / Power Management
TDK Corporation has introduced two new varistor series in SMD design, the larger of the two capable of handling a surge current of 10 000 A.