Analogue, Mixed Signal, LSI


Crystal-less clock generator

6 August 2014 Analogue, Mixed Signal, LSI

Micrel’s DSC400 is a new four-output clock generator in the company’s ‘Crystal-less’ family. This is the first MEMS-based timing product launch built to open Micrel’s PureSilicon MEMS technology to provide excellent jitter and stability while incorporating additional device functionality.

The device targets a broad range of applications including communications and networks; Ethernet 1G, 10GBASE-T/KR/LR/SR and FCoE; storage area networks, FC, SATA, SAS, FTTH EPON, 10G-EPON, GPON and 10G-PON; HD/SD/SDI video and surveillance; automotive; media and video; and embedded and industrial.

As well as low RMS phase jitter of less than 1 ps and high stability with ±25 ppm and ±50 ppm options, the DSC400 offers high supply noise rejection of -50 dBc and generates four outputs, each of which may be independently configured for LVPECL, LVDS, HCSL or LVCMOS format.

With a wide frequency range of 2,3 MHz – 460 MHz, the device has excellent shock and vibration immunity (qualified to MIL-STD-88), high reliability and a wide supply range of 2,24 V to 3,6 V. The solution is RoHS compliant and is qualified to MIL-STD-883 and automotive AEC-Q100. It has a wide temperature range; (-20°C to 70°C for extended commercial and -40°C to 85°C for industrial) and is offered in a 20 QFN footprint (5 x 3,2 mm) package size.

For more information contact CST Electronics, +27 (0)11 608 0070, sales@cstelectronics.co.za, www.cstelectronics.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Energy measurement IC
CST Electronics Power Electronics / Power Management
The SY7T501 and SY7T502 are Silergy’s newest energy measurement ICs for cost-sensitive IoT applications such as smart-plugs, dimmers, power-strips, intelligent lighting, and other points of load.

Read more...
Easy wireless mesh networking
CST Electronics Telecoms, Datacoms, Wireless, IoT
NeoCortec has announced three new NeoMesh Click boards that are ideal for wireless mesh networking, eliminating the need for engineers to create any development PCB hardware themselves.

Read more...
LoRa transceiver module
CST Electronics Telecoms, Datacoms, Wireless, IoT
The RYLR896 transceiver module from REYAX features the LoRa long range modem that provides ultra-long range spread spectrum communication.

Read more...
High-performance antenna solution
CST Electronics Telecoms, Datacoms, Wireless, IoT
The Spitfire Series of antennas delivers exceptional performance with its dipole design, ground plane independence, and easy wall-mount versatility for both indoor and outdoor environments.

Read more...
SMD antenna for GNSS L1 band
CST Electronics Telecoms, Datacoms, Wireless, IoT
Antenova has recently launched the Admotus SMD antenna, a ceramic antenna suitable for all GNSS positioning applications in the L1 band covering 1559 to 1609 MHz.

Read more...
High-speed PIN diode
Altron Arrow Analogue, Mixed Signal, LSI
Vishay’s new high-speed Silicon PIN diode is able to detect both visible and near infra-red radiation over a wide spectrum range from 350 to 1100 nm.

Read more...
Analogue front end for sensor measurements
Electrocomp Analogue, Mixed Signal, LSI
The NJU9103 AFE from Nisshinbo is a tiny analogue front end, with a 16-bit resolution ADC and up to 512 x signal amplification from the programmable gain amplifier.

Read more...
Single-channel software configurable I/O
Altron Arrow Analogue, Mixed Signal, LSI
These use cases of the AD74115H include analogue output and input, digital output and input, resistance temperature detector (RTD), and thermocouple measurement capability.

Read more...
Current-sense amplifier with PWM rejection
Altron Arrow Analogue, Mixed Signal, LSI
Analog Devices’ AD8410A is a high voltage, high bandwidth current-sense amplifier that features an initial gain of 20 V/V and a 2,2 MHz bandwidth.

Read more...
New NeoMesh protocol stack version
CST Electronics Circuit & System Protection
NeoCortec has released an updated NeoMesh protocol stack version 1.6 firmware for its NC2400 and NC1000 module series, which now supports the new Sensirion SHT4xA temperature and humidity sensor series.

Read more...