RFID tag monitors exposure to light

Telecoms, Datacoms, Wireless, IoT

Microwave semiconductor & tube suppliers

Radio system suppliers

RF module & subsystem suppliers

Telephony IC suppliers

Wireless system IC/module suppliers

printer friendly version

8 April 2015 Telecoms, Datacoms, Wireless, IoT

The Shadow, made by Spanish company Farsens, is a battery-free RFID ambient light detector tag for use in automated applications where exposure to light of tagged assets changes during the process. Monitoring the changes allows the user to program a variety of procedures based on process time/status and the detector data. The device is usually embedded in sealed places where exposure to light is scarce.

Compatible with commercial EPC C1G2 readers, the tag features an LPRS N5AC501085 light dependent resistor (LDR) to detect exposure to light or darkness. It has a 96-bit EPC code, a 32-bit TID and a password protected kill command. Built in a PCB format, it is available in different sizes and has a communication range up to 1,5 metres.

These ambient light detector tags are available in a variety of antenna designs to suit specific applications. They can be embedded in a wide variety of materials such as plastics or concrete, and can also be encapsulated in an IP67 or IP68 casing for use in harsh environments. They can operate in temperatures spanning 30°C to +85°C.

The fact that the Shadow is fully passive makes it ideal for inaccessible or restricted areas and those where the use of batteries is not recommended. Since it will never require a battery change, it leads to savings on maintenance costs.

For more information visit www.farsens.com

Share this article:

18 W monolithic microwave amplifier
RFiber Solutions Telecoms, Datacoms, Wireless, IoT
The CHA8612-QDB is a two stage, high-power amplifier operating between 7,9 and 11 GHz. The monolithic microwave amplifier can typically provide 18 W of saturated output power and 40% of power-added efficiency.

Read more...

LoRaWAN-certified sub-GHz module
Altron Arrow Telecoms, Datacoms, Wireless, IoT
The STM32WL5M from ST Microelectronics is the company’s first LoRaWAN-certified module which incorporates two cores, one of them being a wireless stack to optimise the creation of sub-GHz applications.

Read more...

3D depth sensing sensor
Avnet Silica Telecoms, Datacoms, Wireless, IoT
A recent announcement by STMicroelectronics has revealed an all-in-one, direct Time-of-Flight (dToF) 3D LiDAR (Light Detection And Ranging) module with 2,3k resolution.

Read more...

Quectel announces module for RedCap comms
Quectel Wireless Solutions Telecoms, Datacoms, Wireless, IoT
The Quectel RG255G offers downlink performance of 220 Mbps, and uplink performance of 121 Mbps on 256QAM or 91 Mbps on 64QAM.

Read more...

Wide-Bandgap Developer Forum
Infineon Technologies Telecoms, Datacoms, Wireless, IoT
This year marks a new chapter for this exclusive event series – all specialist presentations will be broadcasting live from a studio in Munich.

Read more...

Multimode smart LTE module with GNSS
Quectel Wireless Solutions Telecoms, Datacoms, Wireless, IoT
The AW200Z LTE module is equipped with Bluetooth and Wi-Fi functionalities, and is powered by Qualcomm's advanced 64-bit quad-core Cortex-A53 processors, coupled with an integrated Adreno 702 GPU.

Read more...

LEXI-R10 series cellular module
RF Design Telecoms, Datacoms, Wireless, IoT
The LEXI-R10 Series from u-blox are LTE Cat 1 bis modules that support multi-band LTE-FDD, and are designed for size-constrained devices.

Read more...

Quectel modules above average in security
Quectel Wireless Solutions Telecoms, Datacoms, Wireless, IoT
Quectel Wireless Solutions has announced that nearly 95% of all its modules shipped to the United States since the beginning of 2022 have industry-leading security scores based on penetration testing and binary analysis by Finite State.

Read more...

Categories

Telecoms, Datacoms, Wireless, IoT

RFID tag monitors exposure to light

Further reading:

Publications by Technews