Power Electronics / Power Management


Open frame power supplies

1 July 2015 Power Electronics / Power Management

RECOM’s new RAC48/OF and RAC60/OF Class II open frame power supplies offer 48 W or 60 W output power. With an operating temperature range of -20°C to +50°C at 100% load and up to 70°C at derated load, there is typically no need for active cooling.

These compact AC-DC modules are highly efficient, have a long hold-up time (60 ms) and are also compliant with the European ErP directive (<0,5 W standby consumption). They are also built with high-quality components to ensure long, trouble-free service, and come with a standard three-year warranty.

Both series are available with output voltages of 5 V, 12 V, 15 V and 24 V d.c., and are trimmable to compensate for voltage drops on the output connections. The DC outputs are fully protected with over-current protection, over-voltage protection and hiccup short circuit protection. With their universal input voltage range of 90 V to 265 V a.c. and 3 kV a.c./1 minute isolation, they are suitable for worldwide use.

The converters are fully certified with EN55022 EMC (Class B), IEC 60950-1 CB Report, EMC + LVD CE mark, FCC and UL 60950-1 certificates. Their mean time before failure lifetime (MIL-HDBK217F) is approximately 450 000 hours.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Local procurement should be top of mind in mine-owned solar power projects
Power Electronics / Power Management
Recent changes in government legislation have enabled businesses to develop up to 100 MW energy plants with very little red tape.

Read more...
The next big shift in SA's energy infrastructure
Power Electronics / Power Management
High-voltage (HV) LiFePO4 battery energy storage systems, commonly referred to as BESS, which drastically improve the power reliability prospects for businesses, have been around for some time, but expect to see a massive surge in 2024.

Read more...
Multi-channel electronic load series
Conical Technologies Power Electronics / Power Management
ITECH has recently announced the release of their upgraded IT8700P+ series multi-channel electronic loads. This new series supports master-slave parallel configuration between all the modules, allowing for different modules to be mixed and matched for synchronisation.

Read more...
Self-extinguishing batteries
Power Electronics / Power Management
The most commonly used electrolyte, which is highly combustible – a medium composed of a lithium salt and an organic solvent – is replaced with materials found in a commercial fire extinguisher.

Read more...
Input power bus conditioners
Accutronics Power Electronics / Power Management
The FLHG-60 and the FLHGI-60 are designed to be used as the front-end to the company’s MGDD N input series, to develop full power solutions.

Read more...
Isolated power module with high efficiency
RS South Africa Power Electronics / Power Management
The new MagI3C-FISM power module, with an integrated switching power stage, is 100% pin-to-pin compatible with the previous versions.

Read more...
Hi-Rel DC-DC converter
Accutronics Power Electronics / Power Management
The MGDD-06 series from GAÏA Converter is an ultra-wide input 6 W family of power converter modules, with a permanent input voltage range of 9 to 160 V DC.

Read more...
Energy measurement IC
CST Electronics Power Electronics / Power Management
The SY7T501 and SY7T502 are Silergy’s newest energy measurement ICs for cost-sensitive IoT applications such as smart-plugs, dimmers, power-strips, intelligent lighting, and other points of load.

Read more...
Reference design: USB-C PD and Qi charging
Power Electronics / Power Management
Infineon’s REF_TX15W_PD60W_N1 is the industry’s first turnkey solution to offer a PD and Qi multi-charger, allowing same-time charging via the USB-PC PD port and the Qi wireless power transmitter.

Read more...
SMD varistors with huge surge current capability
Electrocomp Power Electronics / Power Management
TDK Corporation has introduced two new varistor series in SMD design, the larger of the two capable of handling a surge current of 10 000 A.

Read more...