From ETA comes the 4230-T, a single- or multi-pole, track mountable MCB (miniature circuit breaker) with current ratings up to 63 A. Its conformity with the relevant standards IEC 60947-2, UL 1077 and UL 489 makes it suitable for worldwide use.
Electrical add-on modules such as an auxiliary contact module or a working current module can be mounted on the left side of the breaker. Busbars for all standards allow efficient wiring and individual setup of device combinations.
A green/red mechanical status indication provides information on the switching condition on the front of the breaker.
Due to the high short-circuit breaking capacity of up to 10 kA, the 4230-T is above all suitable for AC applications in mechanical engineering.
Clearing the Static: ESD clothing and footwear Actum Electronics
Circuit & System Protection
ESD clothing plays a pivotal role in preventing that people do not charge the products that they are working with.
Read more...Single-phase EMC filters RS South Africa
Circuit & System Protection
TDK Corporation has expanded its portfolio of single-phase EMC filters for AC and DC applications up to 250 V and rated currents from 6 to 30 A.
Read more...Clearing the Static: ESD protective packaging Actum Group
Circuit & System Protection
The primary objective of ESD protective packaging is to prevent ESD incidents within the packaging and facilitate the dissipation of charges from the outer surface.
Read more...New NeoMesh protocol stack version CST Electronics
Circuit & System Protection
NeoCortec has released an updated NeoMesh protocol stack version 1.6 firmware for its NC2400 and NC1000 module series, which now supports the new Sensirion SHT4xA temperature and humidity sensor series.
Read more...NewFeed feeder protection relay NewElec Pretoria
Circuit & System Protection
The NewFeed Feeder Protection Relay has been designed to protect the connection between solar farms and conventional power grids in both low voltage (LV) and medium voltage (MV) distribution settings.
Read more...Clearing the Static Actum Electronics
Circuit & System Protection
The use of grounding products and testing equipment becomes essential to verify the proper functionality of static control systems in the work environment.
Read more...Mobile devices in hazardous areas Extech Safety Systems
Editor's Choice Circuit & System Protection
Five areas where the requirements of IS are important and substantial to avoid ignition via mobile devices have been selected, with all references to SANS 60079-11:2012.
Read more...Next-gen HVC series Future Electronics
Circuit & System Protection
TDK has announced its new generation of high-voltage contactors that can safely and reliably switch off continuous DC currents up to 500 A, and operating DC voltages up to 1000 V in lithium-ion batteries in 20 ms or less.