Nordic Semiconductor has launched its first Thread networking solution with the release of its nRF5 SDK for Thread that is designed to utilise the IEEE 802.15.4 PHY support introduced on the firm’s latest nRF52840 multi-protocol Bluetooth low energy system-on-chip (SoC). In addition, the SDK adds a unique device firmware update (DFU)-over-Thread network feature like the over-the-air DFU feature employed in other existing Nordic SDKs and chips.
The nRF52840’s large RAM (256 KB) and Flash (1 MB) memory enable the SoC to run both the Thread and Bluetooth low energy protocol stacks from the same single chip. What’s more, it is able to run the Thread protocol at accelerated processing speeds by using its built-in ARM CryptoCell-310 cryptographic accelerator to run the Thread security algorithms.
Thread was designed to create the best way to connect and control products where people live and work. This includes robust security (smartphone-grade authentication and AES encryption), low power battery-friendly operation, and scalable reliability. This is all built around a developer-friendly IP-based (IPv6 with 6LoWPAN) mesh network. Prime ‘home Internet of Things (IoT)’ target applications for Thread include home automation, appliances, access control, climate control, safety, lighting, healthcare and security systems.
As well as support for DFU-over-Thread, the Nordic nRF5 SDK for Thread includes a pre-built OpenThread stack for the Nordic nRF52840 SoC; examples of all the different Thread roles; support for an OpenThread network co-processor; a CoAP application layer example; border router and cloud connectivity example; and a range of PC tools including a Thread topology monitor.
The Nordic nRF5 SDK for Thread is now available in Alpha release with full production scheduled for the fourth quarter of 2017, aligning with the full production of the Nordic nRF52840 SoC.
Full sensor to cloud solution CST Electronics
Telecoms, Datacoms, Wireless, IoT
NeoCortec has demonstrated the seamless and rapid development of full sensor-to-cloud solutions using NeoMesh Click boards from MikroE and the IoTConnect cloud solution from Avnet.
Read more...Long-range Wi-Fi HaLow module TRX Electronics
Telecoms, Datacoms, Wireless, IoT
One of Mouser’s newest products is the Morse Micro MM6108-MF08651-US Wi-Fi HaLow Module, which adheres to the IEEE 802.11ah standard.
Read more...Quectel launches 3GPP NTN comms module Quectel Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
Quectel Wireless Solutions has announced the Quectel BG95-S5 3GPP non-terrestrial network (NTN) satellite communication module.
Read more...SIMCom’s A7673x series Otto Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat.1 bis module based on the ASR1606 chipset, that supports wireless communication modes of LTE-FDD, with a maximum downlink rate of 10 Mbps and a maximum uplink rate of 5 Mbps.
Read more...SiP supports LTE/NB-IoT and GNSS RF Design
DSP, Micros & Memory
The nRF9151 from Nordic Semiconductor is an integrated System-in-Package that supports LTE-M/NB-IoT, DECT NR+ and GNSS services.
Read more...Long-range connectivity module Avnet Silica
Telecoms, Datacoms, Wireless, IoT
Digi XBee XR 868 RF Modules support the deployment of long-range connectivity applications, and support point-to-point and mesh networking protocols.
Read more...4G LTE-M/NB-IoT connectivity reference design iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
Developed around the industry-leading Nordic nRF9160 module, the platform comes complete with a newly-developed LTE antenna, ATRIA, which is pre-certified to operate over the full LTE-M and NB-IoT bands.
Read more...Antennas to meet all connectivity requirements Electrocomp
Telecoms, Datacoms, Wireless, IoT
Kyocera AVX RF antennas meet today’s connectivity demands in the LTE, Wi-Fi, Bluetooth, GNSS, and ISM wireless bands, available in surface mount, patch or external configurations.
Read more...Introducing SIMCom’s new A7673X series Otto Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat 1 bis module that supports LTE-FDD, with a maximum downlink rate of 10 Mbps and an uplink rate of 5 Mbps.