Power Electronics / Power Management


DIN rail power supplies

17 May 2017 Power Electronics / Power Management

XP Power announced the DPC series of highly efficient, ultra slim DIN rail AC-DC power supplies.

Available in 30, 50 and 70 Watt single output models, they all accept the universal input range from 90 to 264 V a.c. without the need for any input selector switches. Taking up significantly less space on the rail by being up to 44% slimmer than current generation DIN rail power supplies, the 30 Watt DPC30 measures just 90,0 x 100,0 x 22,5 mm. Also, the 50 Watt DPC50 measures 90,0 x 100,0 x 30,0 mm and the 70 Watt DPC70 measures 90,0 x 100,0 x 40,5 mm.

Offering all the popular nominal output voltages from +5 to +48 V d.c., the single output can be adjusted up to +30% of stated nominal, model dependent, in order to accommodate non-standard voltage requirements or to make up for line losses. All models feature a green LED to indicate output on.

These energy efficient supplies have typical efficiency ratings of 86% (DPC30), 87% (DPC50) and 89% (DPC70). Both the DPC30 and DPC50 achieve a very low no-load input power of less than 0,3 Watts, with the DPC70 managing less than 0,5 Watts. The full output power is delivered across the input voltage range of 100 –264 V a.c. and at –25°C to +50°C without the need to derate the units. The operating temperature range of the series extends up to +70°C.

The DPC series meets EN/IEC 60950-1 safety approvals as well as EMC specifications EN55032 for class B conducted and radiated emissions. The supplies also comply with the industrial control equipment standard UL508. Typical applications include factory automation, process control and various other industrial applications. Use of screw terminals for both input and output connections provides a robust, quick and convenient means of installing the units.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Local procurement should be top of mind in mine-owned solar power projects
Power Electronics / Power Management
Recent changes in government legislation have enabled businesses to develop up to 100 MW energy plants with very little red tape.

Read more...
The next big shift in SA's energy infrastructure
Power Electronics / Power Management
High-voltage (HV) LiFePO4 battery energy storage systems, commonly referred to as BESS, which drastically improve the power reliability prospects for businesses, have been around for some time, but expect to see a massive surge in 2024.

Read more...
Multi-channel electronic load series
Conical Technologies Power Electronics / Power Management
ITECH has recently announced the release of their upgraded IT8700P+ series multi-channel electronic loads. This new series supports master-slave parallel configuration between all the modules, allowing for different modules to be mixed and matched for synchronisation.

Read more...
Self-extinguishing batteries
Power Electronics / Power Management
The most commonly used electrolyte, which is highly combustible – a medium composed of a lithium salt and an organic solvent – is replaced with materials found in a commercial fire extinguisher.

Read more...
Input power bus conditioners
Accutronics Power Electronics / Power Management
The FLHG-60 and the FLHGI-60 are designed to be used as the front-end to the company’s MGDD N input series, to develop full power solutions.

Read more...
Isolated power module with high efficiency
RS South Africa Power Electronics / Power Management
The new MagI3C-FISM power module, with an integrated switching power stage, is 100% pin-to-pin compatible with the previous versions.

Read more...
Hi-Rel DC-DC converter
Accutronics Power Electronics / Power Management
The MGDD-06 series from GAÏA Converter is an ultra-wide input 6 W family of power converter modules, with a permanent input voltage range of 9 to 160 V DC.

Read more...
Digitisers upgraded with pulse generator option
Vepac Electronics Test & Measurement
Spectrum Instrumentation has added the Digital Pulse Generator option to its ultrafast digitisers (with up to 10 GS/s speed) and arbitrary waveform generators.

Read more...
Energy measurement IC
CST Electronics Power Electronics / Power Management
The SY7T501 and SY7T502 are Silergy’s newest energy measurement ICs for cost-sensitive IoT applications such as smart-plugs, dimmers, power-strips, intelligent lighting, and other points of load.

Read more...
Reference design: USB-C PD and Qi charging
Power Electronics / Power Management
Infineon’s REF_TX15W_PD60W_N1 is the industry’s first turnkey solution to offer a PD and Qi multi-charger, allowing same-time charging via the USB-PC PD port and the Qi wireless power transmitter.

Read more...