News


From the editor's desk: Fake chips aren’t going away

16 August 2017 News

Anyone who’s designed and tested electronic circuits will tell you, having a circuit that doesn’t work is not the worst that can happen; it’s the intermittent faults that really hurt. For a product that’s gone into full production, having those products begin to fail in the field is about the worst outcome the manufacturer can face, necessitating repairs, recalls and possibly even redesigns. All of these problems, and many others besides, can be caused by fake or counterfeit electronic components.

It’s important to have a clear definition of what exactly makes a fake component fake, and the US Department of Commerce provides a definition of a counterfeit electronic part as “one that is not genuine because it: is an unauthorised copy; does not conform to original OCM (original component manufacturer) design, model or performance standards; is not produced by the OCM or is produced by unauthorised contractors; is an off-specification, defective, or used OCM product sold as ‘new’ or working; or has incorrect or false markings or documentation, or both.”

You may imagine these counterfeit chips being manufactured using cobbled together or out-of-date manufacturing equipment in a factory off some back alley in Shanghai and loaded into the back of an unmarked truck in the dead of night, but there are in fact several ways for them to find their way into the supply chain. While many are indeed made on illegal production lines, they are not always of such poor quality as to fail immediately, or at all, but substandard or non-existent cleanliness, packaging and testing means they almost never meet the guaranteed specifications of the ‘real McCoy’.

Other ways for them to be dispersed is by being salvaged from electronic waste, cleaned up and sold on the grey market. Buyers in particular risk of this tactic are those looking to obtain obsolete parts that are critical to their product’s design. Your best bet is always to buy from the original component manufacturer or one of their authorised distributors/resellers. Some companies even buy up stock of soon-to-be-obsolete parts and stockpile them, providing a legitimate supply source far beyond their obsolescence date.

There have also been claims of manufacturing rejects being packaged, marked and interjected into the supply chain as fully tested devices, by someone with access to the production facility. Amazon had a scare recently with stories of fake AMD processors showing up for sale, supposedly originating from a case of a customer who returned one as faulty, in its original and apparently unopened packaging, only to be resold to an unsuspecting buyer.

It’s not only unscrupulous or desperate electronics manufacturers who fall victim to counterfeit components. Last year three Chinese men pleaded guilty to conspiring to buy genuine field-programmable gate arrays (FPGAs) stolen from a US Navy base and replacing them with fake versions. An undercover agent foiled the plot before the duds could find their way into critical weapons systems.

The problem of counterfeit components has reached such proportions that the Silicon Industry Association (SIA) in the USA has set up an anti-counterfeiting task force which works continuously to curtail the supply and demand for these illegal products and to educate customers on how to avoid purchasing counterfeits. The association produced a 28-page white paper in 2013 which described the size of the problem and methods to mitigate the dangers. While it goes into much detail, the upshot of that white paper amounts to what should be considered common sense:

“As compared to the authorised market, the open market, including independent distributors, brokers, and Internet-based component exchanges, has far fewer controls over proper handling, storage and transportation of components, and often lacks component traceability to the manufacturer. This lack of controls and traceability, along with the frequency and ease at which components move through this non-authorised supply chain make the open market an easy target for counterfeiters to infiltrate to sell their illegal products that often have poor reliability. Semiconductor products purchased on the open market may be cheaper in the short-term than those bought from authorised sources, but they can be far more expensive in the long-term if they are counterfeit and/or were improperly handled and stored, thus potentially resulting in major rework costs and high warranty or liability claims.”

Postscript:

Have you ever been the victim of counterfeit components, or do you know of anyone who has? Send me your story – anonymously if you wish – to brett@technews.co.za

Brett van den Bosch

Editor



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Revamped technical training centre in Welkom
News
Resolution Circle has announced the launch of its newly revamped training centre in Welkom, which will enhance technical education and foster industry partnerships.

Read more...
E-mobility: Navigate safety, interoperability and conformance
Concilium Technologies News
In this whitepaper, these challenges are discussed in more detail and the question is asked: How can EV and EVSE manufacturers navigate a complex regulatory landscape and deliver a quality product, without compromising time-to-market projections?

Read more...
Navigating South Africa’s transition from the NQF to OQSF framework
News
South Africa is at a crossroads of a significant educational and vocational transition, as it shifts from the National Qualifications Framework (NQF) to the Occupational Qualifications Sub Framework (OQSF) managed by the Quality Council for Trades and Occupations.

Read more...
Practical insights: Draft regulations on proposed sectoral targets
News
On 1 February 2024, the Minister of Employment and Labour issued new draft regulations concerning sectoral targets (draft regulations), providing a 90-day window for interested parties to comment.

Read more...
Top skills needed in microelectronics industry
News
The EU funded project MicroElectronics Training, Industry and Skills (METIS), which began in 2019, has officially concluded, and with this, SEMI Europe has published the final Yearly Monitoring Report.

Read more...
RS expands its professional lineup
RS South Africa News
RS PRO offers a wide range of high-quality electronics components, to meet a range of needs, from industrial connectors and passives to the latest test and measurement equipment.

Read more...
Alternative energy resource hub
News
Mouser Electronics is providing engineers with key information to solve today’s design challenges through its dedicated alternative energy resource centre.

Read more...
NECTO Studio 6.0 brings circuits to life
News
MIKROE has added increased graphical functionality and Clang support for ARM and RISC-V to its cross-platform IDE for embedded applications.

Read more...
Microchip earns certification in vehicle cybersecurity
Altron Arrow News
Microchip Technology’s corporate processes associated with specific automotive work products have recently been audited by a third party, UL Solutions, and certified as compliant to ISO/SAE 21434.

Read more...
From the editor's desk: A scourge on education
Technews Publishing News
The current government has done very little to curb the rampant affect that loadshedding has had on education in the last 10 years.

Read more...