Custom MMIC announces a new edition to its lineup of high performance MMIC doublers, the CMD226N3 broadband frequency doubler covering an input frequency of 7 GHz to 11 GHz (C-,X, input; Ku- and K-band output). This doubler’s low conversion loss and excellent Fo isolation make it ideal for use in military radar, SMDS, SATCOM, VSAT and LO chains for point-to-point microwave/millimetre-wave radio in cellular backhaul applications.
The GaAs device is a x2 passive frequency multiplier that offers broadband performance and is housed in a QFN-style package. With a drive level of +15 dBm, it offers 9,0 dBm of conversion loss at 18 GHz and Fo isolation in reference to an input level of 44 dB. The 3Fo and 4Fo isolation are at least 48 dBc and 50 dBc, respectively.
Extremely temperature stable, the conversion gain varies less than 2 dB from nominal across the entire frequency band of operation, and is also very stable under varying drive conditions. The CMD226N3’s passive design exhibits
excellent phase noise performance, without the need for biasing circuitry. It also incorporates a 50 Ω matched design on chip, removing the necessity to RF port match this device.
Antennas to meet all connectivity requirements Electrocomp
Telecoms, Datacoms, Wireless, IoT
Kyocera AVX RF antennas meet today’s connectivity demands in the LTE, Wi-Fi, Bluetooth, GNSS, and ISM wireless bands, available in surface mount, patch or external configurations.
Read more...Introducing SIMCom’s new A7673X series Otto Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat 1 bis module that supports LTE-FDD, with a maximum downlink rate of 10 Mbps and an uplink rate of 5 Mbps.
Read more...18 W monolithic microwave amplifier RFiber Solutions
Telecoms, Datacoms, Wireless, IoT
The CHA8612-QDB is a two stage, high-power amplifier operating between 7,9 and 11 GHz. The monolithic microwave amplifier can typically provide 18 W of saturated output power and 40% of power-added efficiency.
Read more...LoRaWAN-certified sub-GHz module Altron Arrow
Telecoms, Datacoms, Wireless, IoT
The STM32WL5M from ST Microelectronics is the company’s first LoRaWAN-certified module which incorporates two cores, one of them being a wireless stack to optimise the creation of sub-GHz applications.
Read more...3D depth sensing sensor Avnet Silica
Telecoms, Datacoms, Wireless, IoT
A recent announcement by STMicroelectronics has revealed an all-in-one, direct Time-of-Flight (dToF) 3D LiDAR (Light Detection And Ranging) module with 2,3k resolution.
Read more...Nordic expands nRF91 series RF Design
DSP, Micros & Memory
Nordic Semiconductor has announced the expansion of its nRF91 series cellular IoT devices with the introduction of the nRF9151 System-in-Package (SiP).
Read more...Quectel announces module for RedCap comms Quectel Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
The Quectel RG255G offers downlink performance of 220 Mbps, and uplink performance of 121 Mbps on 256QAM or 91 Mbps on 64QAM.
Read more...Wide-Bandgap Developer Forum Infineon Technologies
Telecoms, Datacoms, Wireless, IoT
This year marks a new chapter for this exclusive event series – all specialist presentations will be broadcasting live from a studio in Munich.
Read more...Multimode smart LTE module with GNSS Quectel Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
The AW200Z LTE module is equipped with Bluetooth and Wi-Fi functionalities, and is powered by Qualcomm's advanced 64-bit quad-core Cortex-A53 processors, coupled with an integrated Adreno 702 GPU.
Read more...LEXI-R10 series cellular module RF Design
Telecoms, Datacoms, Wireless, IoT
The LEXI-R10 Series from u-blox are LTE Cat 1 bis modules that support multi-band LTE-FDD, and are designed for size-constrained devices.
printer friendly version