With extremely high efficiency and quiescent current of only 300 nA, the MAX17222 nanoPower boost regulator from Maxim Integrated Products enables the longest battery life in the smallest form factor for wearable and consumer IoT designs. The 0,4 V to 5,5 V input, 1,8 V to 5 V output boost regulator with 500 mA input current limit reduces solution size by up to 50% compared to similar products and offers 95% peak efficiency to minimise heat dissipation.
Designers of new wearable, health-monitoring, IoT, mobile, and other connected devices are struggling to extend battery life for next-generation products, particularly with increasing functionality and performance in smaller form factors. Power solutions servicing this market require mastery of low quiescent current design techniques and high integration.
In ‘True Shutdown’ mode, the minuscule current draw of 0,5 nA virtually stops battery drain to provide the longest battery life and eliminate the need for external disconnect switches. Dramatically reducing solution size, the MAX17222 is internally compensated and requires only a single configuration resistor and small output filter for a full power solution.
For ease of use, the boost regulator comes in tiny 0,88 x 1,4 mm 6-bump WLP and 2 x 2 mm 6-pin standard μDFN packages. It operates over the -40°C to +85°C temperature range.
Full sensor to cloud solution CST Electronics
Telecoms, Datacoms, Wireless, IoT
NeoCortec has demonstrated the seamless and rapid development of full sensor-to-cloud solutions using NeoMesh Click boards from MikroE and the IoTConnect cloud solution from Avnet.
Read more...Banana Pi with NPU CST Electronics
AI & ML
The latest Banana Pi SBC, the BPI-M7, is powered by Rockchip’s latest flagship RK3588 octa-core 64-bit processor, with a maximum frequency of 2,4 GHz.
Read more...Hardened-grade network switches CST Electronics
Computer/Embedded Technology
Lantronix’s hardened switches provide Layer 2 or Layer 3 networking, and are available as Power-over-Ethernet (PoE) or Power-over-Ethernet Plus (PoE+).
Read more...Energy measurement IC CST Electronics
Power Electronics / Power Management
The SY7T501 and SY7T502 are Silergy’s newest energy measurement ICs for cost-sensitive IoT applications such as smart-plugs, dimmers, power-strips, intelligent lighting, and other points of load.
Read more...Easy wireless mesh networking CST Electronics
Telecoms, Datacoms, Wireless, IoT
NeoCortec has announced three new NeoMesh Click boards that are ideal for wireless mesh networking, eliminating the need for engineers to create any development PCB hardware themselves.
Read more...LoRa transceiver module CST Electronics
Telecoms, Datacoms, Wireless, IoT
The RYLR896 transceiver module from REYAX features the LoRa long range modem that provides ultra-long range spread spectrum communication.
Read more...High-performance antenna solution CST Electronics
Telecoms, Datacoms, Wireless, IoT
The Spitfire Series of antennas delivers exceptional performance with its dipole design, ground plane independence, and easy wall-mount versatility for both indoor and outdoor environments.
Read more...SMD antenna for GNSS L1 band CST Electronics
Telecoms, Datacoms, Wireless, IoT
Antenova has recently launched the Admotus SMD antenna, a ceramic antenna suitable for all GNSS positioning applications in the L1 band covering 1559 to 1609 MHz.
Read more...New NeoMesh protocol stack version CST Electronics
Circuit & System Protection
NeoCortec has released an updated NeoMesh protocol stack version 1.6 firmware for its NC2400 and NC1000 module series, which now supports the new Sensirion SHT4xA temperature and humidity sensor series.
Read more...Nanometre-precision piezo actuators RS South Africa
Electronics Technology
TDK Corporation has announced two new piezo actuators that are characterised by a wide dynamic range, a high force-to-volume ratio, but with precision in the nanometre range.
printer friendly version