Power Electronics / Power Management


Monolithic buck battery charger

15 November 2017 Power Electronics / Power Management

Analog Devices, which recently acquired Linear Technology, introduced the LTC4091, a complete lithium-ion battery backup management system for 3,45 V to 4,45 V supply rails that must be kept active during a long duration main power failure. The LTC4091 employs a 36 V monolithic buck converter with adaptive output control to provide power to a system load and enable high-efficiency battery charging from the buck output.

When external power is available, the device can provide up to 2,5 A of total output current and up to 1,5 A of charge current for single-cell 4,1 V or 4,2 V Li-Ion batteries. If the primary input source fails and can no longer power the load, the LTC4091 provides up to 4 A to the system output load from the backup Li-Ion battery via an internal ideal diode, and unlimited current if an external ideal diode transistor is used.

To protect sensitive downstream loads, the maximum output load voltage is 4,45 V. The device’s PowerPath control provides a seamless switchover between input power and backup power during a power fail event, and enables reverse blocking with a shorted input. Typical applications include fleet and asset tracking, automotive GPS data loggers and telematics systems, security systems, communications and industrial backup systems.

The LTC4091 includes 60 V absolute maximum input over-voltage protection, making the IC immune to high input voltage transients. The LTC4091’s battery charger provides two pin-selectable charge voltages optimised for Li-Ion battery backup applications: the standard 4,2 V, and a 4,1 V option that trades off battery run time for increased charge/discharge cycle life.

Other features include soft start and frequency foldback to control output current during startup and overload, as well as trickle charge, automatic recharge, low battery precharge, charge timer termination, thermal regulation and a thermistor pin for temperature-qualified charging.

The LTC4091 is housed in a low profile (0,75 mm) 22-pin, 3 mm x 6 mm DFN package with a backside metal pad for excellent thermal performance. The device operates from –40°C to 125°C in both E and I grades.

For more information contact Conrad Coetzee, Arrow Altech Distribution, +27 (0)11 923 9600, ccoetzee@arrow.altech.co.za, www.arrow.altech.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Multiprotocol wireless SoC
Altron Arrow DSP, Micros & Memory
The EFR32MG24 Wireless SoCs are ideal for mesh IoT wireless connectivity using Matter, OpenThread, and Zigbee protocols for smart home, lighting, and building automation products.

Read more...
Synchronous step-down controller for GaN FETs
Altron Arrow Multimedia, Videos
The LTC7890 and LTC7891 are low IQ, dual, two-phase synchronous step-down controllers that have GaN drive technology fully optimised for GaN FETs.

Read more...
Local procurement should be top of mind in mine-owned solar power projects
Power Electronics / Power Management
Recent changes in government legislation have enabled businesses to develop up to 100 MW energy plants with very little red tape.

Read more...
The next big shift in SA's energy infrastructure
Power Electronics / Power Management
High-voltage (HV) LiFePO4 battery energy storage systems, commonly referred to as BESS, which drastically improve the power reliability prospects for businesses, have been around for some time, but expect to see a massive surge in 2024.

Read more...
Multi-channel electronic load series
Conical Technologies Power Electronics / Power Management
ITECH has recently announced the release of their upgraded IT8700P+ series multi-channel electronic loads. This new series supports master-slave parallel configuration between all the modules, allowing for different modules to be mixed and matched for synchronisation.

Read more...
Self-extinguishing batteries
Power Electronics / Power Management
The most commonly used electrolyte, which is highly combustible – a medium composed of a lithium salt and an organic solvent – is replaced with materials found in a commercial fire extinguisher.

Read more...
Input power bus conditioners
Accutronics Power Electronics / Power Management
The FLHG-60 and the FLHGI-60 are designed to be used as the front-end to the company’s MGDD N input series, to develop full power solutions.

Read more...
Isolated power module with high efficiency
RS South Africa Power Electronics / Power Management
The new MagI3C-FISM power module, with an integrated switching power stage, is 100% pin-to-pin compatible with the previous versions.

Read more...
Hi-Rel DC-DC converter
Accutronics Power Electronics / Power Management
The MGDD-06 series from GAÏA Converter is an ultra-wide input 6 W family of power converter modules, with a permanent input voltage range of 9 to 160 V DC.

Read more...
Energy measurement IC
CST Electronics Power Electronics / Power Management
The SY7T501 and SY7T502 are Silergy’s newest energy measurement ICs for cost-sensitive IoT applications such as smart-plugs, dimmers, power-strips, intelligent lighting, and other points of load.

Read more...