Telecoms, Datacoms, Wireless, IoT


Dual-mode Bluetooth module

16 May 2018 Telecoms, Datacoms, Wireless, IoT

u-blox has announced the new NINA B2 dual-mode Bluetooth 4.2 standalone module, enabling industrial IoT applications thanks to its built-in secure boot and wide temperature range. Pre-flashed with u-blox connectivity software which supports many common use cases such as beacon, GATT client, GATT server and serial port, the device is configured easily using AT commands over UART, without requiring deep knowledge of the Bluetooth protocol. Housed in a 10 x 10,6 x 2,2 mm (without antenna) and 10 x 14 x 3,8 mm (with antenna) package, it is also pin compatible with the u-blox NINA family, allowing it to be easily swapped in or out with other NINA modules, with their different radio technologies such as Bluetooth low energy and Wi-Fi.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Antennas to meet all connectivity requirements
Electrocomp Telecoms, Datacoms, Wireless, IoT
Kyocera AVX RF antennas meet today’s connectivity demands in the LTE, Wi-Fi, Bluetooth, GNSS, and ISM wireless bands, available in surface mount, patch or external configurations.

Read more...
Introducing SIMCom’s new A7673X series
Otto Wireless Solutions Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat 1 bis module that supports LTE-FDD, with a maximum downlink rate of 10 Mbps and an uplink rate of 5 Mbps.

Read more...
18 W monolithic microwave amplifier
RFiber Solutions Telecoms, Datacoms, Wireless, IoT
The CHA8612-QDB is a two stage, high-power amplifier operating between 7,9 and 11 GHz. The monolithic microwave amplifier can typically provide 18 W of saturated output power and 40% of power-added efficiency.

Read more...
LoRaWAN-certified sub-GHz module
Altron Arrow Telecoms, Datacoms, Wireless, IoT
The STM32WL5M from ST Microelectronics is the company’s first LoRaWAN-certified module which incorporates two cores, one of them being a wireless stack to optimise the creation of sub-GHz applications.

Read more...
3D depth sensing sensor
Avnet Silica Telecoms, Datacoms, Wireless, IoT
A recent announcement by STMicroelectronics has revealed an all-in-one, direct Time-of-Flight (dToF) 3D LiDAR (Light Detection And Ranging) module with 2,3k resolution.

Read more...
Nordic expands nRF91 series
RF Design DSP, Micros & Memory
Nordic Semiconductor has announced the expansion of its nRF91 series cellular IoT devices with the introduction of the nRF9151 System-in-Package (SiP).

Read more...
Quectel announces module for RedCap comms
Quectel Wireless Solutions Telecoms, Datacoms, Wireless, IoT
The Quectel RG255G offers downlink performance of 220 Mbps, and uplink performance of 121 Mbps on 256QAM or 91 Mbps on 64QAM.

Read more...
Wide-Bandgap Developer Forum
Infineon Technologies Telecoms, Datacoms, Wireless, IoT
This year marks a new chapter for this exclusive event series – all specialist presentations will be broadcasting live from a studio in Munich.

Read more...
Multimode smart LTE module with GNSS
Quectel Wireless Solutions Telecoms, Datacoms, Wireless, IoT
The AW200Z LTE module is equipped with Bluetooth and Wi-Fi functionalities, and is powered by Qualcomm's advanced 64-bit quad-core Cortex-A53 processors, coupled with an integrated Adreno 702 GPU.

Read more...
LEXI-R10 series cellular module
RF Design Telecoms, Datacoms, Wireless, IoT
The LEXI-R10 Series from u-blox are LTE Cat 1 bis modules that support multi-band LTE-FDD, and are designed for size-constrained devices.

Read more...