Analogue, Mixed Signal, LSI


GaN FET driver for lidar

13 June 2018 Analogue, Mixed Signal, LSI

pSemi (formerly known as Peregrine Semiconductor) announced the availability of the PE29101 gallium nitride (GaN) field-effect transistor (FET) driver for solid-state light detection and ranging (lidar) systems. The PE29101 boasts the industry’s fastest rise times and a low minimum pulse width. In solid-state lidar systems, faster switching translates into improved resolution and accuracy in the lidar image.

The PE29101 is a half-bridge FET driver that controls the gates of GaN transistors. The driver outputs are capable of providing switching transition speeds in the sub-nanosecond range for switching applications up to 40 MHz. The PE29101 has a rise/ fall time of 1 ns with 100 pF load and a minimum output pulse width of 2 ns. It operates from 4 V to 6,5 V and can support a high-side floating supply voltage of 80 V. The PE29101 has an output source current of 2 A and an output sink current of 4 A.

For more information contact Andrew Hannay, RFiber Solutions, +27 82 494 5466, [email protected], www.rfibersolutions.com



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Multi-channel cable assembly
RFiber Solutions Interconnection
Withwave’s Multi-Channel SMPM Cable Assemblies (WMCM Series) provide a wide range of multiple coax connectors and flexible cable assemblies, with a choice of 26,5, 40 and 50 GHz configurations.

Read more...
18 W monolithic microwave amplifier
RFiber Solutions Telecoms, Datacoms, Wireless, IoT
The CHA8612-QDB is a two stage, high-power amplifier operating between 7,9 and 11 GHz. The monolithic microwave amplifier can typically provide 18 W of saturated output power and 40% of power-added efficiency.

Read more...
High-density multicoax cable assembly
RFiber Solutions Interconnection
Withwave’s high speed and high-density Multicoax Cable Assemblies (WMX Series) provide a wide range of multiple coax connectors and flexible cable assemblies with a choice of 20, 40, 50, 67 or 110 GHz configurations.

Read more...
Ultra-low noise phase locked frequency translators
RFiber Solutions Telecoms, Datacoms, Wireless, IoT
These ICs are the perfect solution to translate a low-frequency master reference clock or reference oscillator to a higher frequency to improve phase noise, reduce power consumption, and simplify circuit complexity.

Read more...
High-speed PIN diode
Altron Arrow Analogue, Mixed Signal, LSI
Vishay’s new high-speed Silicon PIN diode is able to detect both visible and near infra-red radiation over a wide spectrum range from 350 to 1100 nm.

Read more...
Sakura debuts for edge AI
RFiber Solutions Telecoms, Datacoms, Wireless, IoT
EdgeCortix has made a strategic shift from selling AI intellectual property (IP) to selling its own edge-AI inference chips for line-powered systems.

Read more...
Pure carbide GaN-on-SiC power amplifier
RFiber Solutions News
MACOM announced an expansion to its power amplifier product portfolio with the MAPC-A1605 7,0 kW power amplifier. This device is suitable for high-power and high-voltage aerospace and defence applications, ...

Read more...
RF switch modules
RFiber Solutions Telecoms, Datacoms, Wireless, IoT
New switch modules from Withwave are available in various configurations including SP4T, SP10T, and as a 4-port matrix switch.

Read more...
High-frequency cascadable amplifier
RFiber Solutions Telecoms, Datacoms, Wireless, IoT
The AM1142 from Atlanta Micro is a wideband, cascadable amplifier operating in the 20 MHz to 18 GHz frequency range.

Read more...
Analogue front end for sensor measurements
Electrocomp Analogue, Mixed Signal, LSI
The NJU9103 AFE from Nisshinbo is a tiny analogue front end, with a 16-bit resolution ADC and up to 512 x signal amplification from the programmable gain amplifier.

Read more...