The Cypress CYW920735Q60EVB-01 evaluation kit enables the evaluation and development of Bluetooth applications using the CYW20735B1, a dual-mode (basic rate and Bluetooth Low Energy) Bluetooth 5.0 wireless MCU device.
The CYW20735 includes an internal power amplifier that provides 10 dBm output power to greatly extend range. It includes several on-chip peripherals including hardware key scanner, PWMs, ADC and the likes. It also includes an analog microphone interface that provides a low-cost solution for voice-enabled remotes as well as Internet of Things (IoT) gadgets and toys.
The CYW20735B1 device and evaluation kit are both supported in WICED Studio 6.2 (or later). The kit features Arduino compatible headers for hardware expansion; a 9-axis motion sensor (3D digital linear acceleration sensor, 3D digital angular rate sensor and 3D digital magnetic sensor) and a thermistor; user switches and LEDs; and USB connector for power, programming and USB-UART bridge. It comes with a USB 2.0 Type-A to Micro-B cable and a quick start guide.
Antennas to meet all connectivity requirements Electrocomp
Telecoms, Datacoms, Wireless, IoT
Kyocera AVX RF antennas meet today’s connectivity demands in the LTE, Wi-Fi, Bluetooth, GNSS, and ISM wireless bands, available in surface mount, patch or external configurations.
Read more...Introducing SIMCom’s new A7673X series Otto Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat 1 bis module that supports LTE-FDD, with a maximum downlink rate of 10 Mbps and an uplink rate of 5 Mbps.
Read more...18 W monolithic microwave amplifier RFiber Solutions
Telecoms, Datacoms, Wireless, IoT
The CHA8612-QDB is a two stage, high-power amplifier operating between 7,9 and 11 GHz. The monolithic microwave amplifier can typically provide 18 W of saturated output power and 40% of power-added efficiency.
Read more...LoRaWAN-certified sub-GHz module Altron Arrow
Telecoms, Datacoms, Wireless, IoT
The STM32WL5M from ST Microelectronics is the company’s first LoRaWAN-certified module which incorporates two cores, one of them being a wireless stack to optimise the creation of sub-GHz applications.
Read more...3D depth sensing sensor Avnet Silica
Telecoms, Datacoms, Wireless, IoT
A recent announcement by STMicroelectronics has revealed an all-in-one, direct Time-of-Flight (dToF) 3D LiDAR (Light Detection And Ranging) module with 2,3k resolution.
Read more...Dual-port USB-C power delivery solution Altron Arrow
Power Electronics / Power Management
Infineon’s CYPD7272-68LQXQ is the tray packing option of the company’s dual-port USB-C power delivery solution and features an integrated dual-port USB-C PD + DC-DC controller.
Read more...Quectel announces module for RedCap comms Quectel Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
The Quectel RG255G offers downlink performance of 220 Mbps, and uplink performance of 121 Mbps on 256QAM or 91 Mbps on 64QAM.
Read more...Wide-Bandgap Developer Forum Infineon Technologies
Telecoms, Datacoms, Wireless, IoT
This year marks a new chapter for this exclusive event series – all specialist presentations will be broadcasting live from a studio in Munich.
Read more...Multimode smart LTE module with GNSS Quectel Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
The AW200Z LTE module is equipped with Bluetooth and Wi-Fi functionalities, and is powered by Qualcomm's advanced 64-bit quad-core Cortex-A53 processors, coupled with an integrated Adreno 702 GPU.
Read more...LEXI-R10 series cellular module RF Design
Telecoms, Datacoms, Wireless, IoT
The LEXI-R10 Series from u-blox are LTE Cat 1 bis modules that support multi-band LTE-FDD, and are designed for size-constrained devices.