Analogue, Mixed Signal, LSI


40000 count multi-display digital multimeters

16 Feb 2000 Analogue, Mixed Signal, LSI

The Escort-2000 process calibrator/meter from ProMicro simultaneously generates and measures signals. It can be used not only for instrument system maintenance but also for maintaining and servicing industrial meters for testing electronic circuits and electronic equipment. Even the sensor can be measured for automotive or automatic control systems.

In addition to generating high accuracy DC voltage and current sources, the device can also generate square wave with PWM features. Via its RS232 interface, measurement data may be recorded, filed and printed. It has a 40 000 count backlit display and a wide range frequency source with adjustable pulse width and duty cycle.

The Escort-2000 offers three calibrating and 12 multimeter functions. The multifunction calibrator measures mA, voltage and frequency and has an 0,03% accuracy for current and voltage output.

A constant current output for load up to 500 W is supplied, as well as ±25 mA bipolar current and a ±1,5, ±15 V output.

The process calibrator/meter has a wide range frequency source with an adjustable pulse width and duty cycle. It has a programmable memory for continuous, ramp or step output and caters for all DMM functions.

The Escort-2000 has a 1 ms peak hold for glitch capture. Various accessories are included such as test leads, 9 V battery, alligator clips and carrying case.

ProMicro

(011) 706 7913

dtm/08x



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

High-speed PIN diode
Altron Arrow Analogue, Mixed Signal, LSI
Vishay’s new high-speed Silicon PIN diode is able to detect both visible and near infra-red radiation over a wide spectrum range from 350 to 1100 nm.

Read more...
Analogue front end for sensor measurements
Electrocomp Analogue, Mixed Signal, LSI
The NJU9103 AFE from Nisshinbo is a tiny analogue front end, with a 16-bit resolution ADC and up to 512 x signal amplification from the programmable gain amplifier.

Read more...
Single-channel software configurable I/O
Altron Arrow Analogue, Mixed Signal, LSI
These use cases of the AD74115H include analogue output and input, digital output and input, resistance temperature detector (RTD), and thermocouple measurement capability.

Read more...
Current-sense amplifier with PWM rejection
Altron Arrow Analogue, Mixed Signal, LSI
Analog Devices’ AD8410A is a high voltage, high bandwidth current-sense amplifier that features an initial gain of 20 V/V and a 2,2 MHz bandwidth.

Read more...
Combining a LPF and ADC driver for a 20 Vp-p signal
Altron Arrow Analogue, Mixed Signal, LSI
A mixed-signal ADC driver circuit’s optimum performance depends on multiple variables: the driver’s settling time, the RC filter’s time constant, driving impedance, and the ADC sampling capacitor’s kickback current, all interact during acquisition time and contribute towards sampling errors.

Read more...
Pressure sensor with NextNav certification
EBV Electrolink Analogue, Mixed Signal, LSI
STMicroelectronics’ LPS22DF pressure sensor has received a NextNav certification, which guarantees performance and reliability for geolocation and other types of applications.

Read more...
Reference design for Raspberry Pi analogue I/O
Analogue, Mixed Signal, LSI
Analogue Devices has published a reference design for ±10 V analogue input and ±15 V analogue output for Raspberry Pi platforms.

Read more...
Multi-zone distance sensor with 90° field of view
Avnet Silica Analogue, Mixed Signal, LSI
STMicroelectronics has revealed a new FlightSense multi-zone distance sensor, with 90° field of view, to bring lifelike situational awareness to applications like home automation, computers, robots, and smart equipment.

Read more...
Six-axis IMU with Qvar sensing channel
Altron Arrow Analogue, Mixed Signal, LSI
The LSM6DSV16X from STMicroelectronics is a high-performance, low-power six-axis IMU, featuring a three-axis digital accelerometer and a three-axis digital gyroscope.

Read more...
Bidirectional current-sense amplifier with PWM
RS South Africa Analogue, Mixed Signal, LSI
The MAX49925 from Analogue Devices is a bidirectional current-sense amplifier (CSA) with an input common-mode range that extends from -40 to 76 V, making it suitable for 48 V HEV applications where there are large automotive transients.

Read more...