DSCs with free motor FOC algorithm
14 May 2008
DSP, Micros & Memory
Microchip has released 10 new 28- and 44-pin 16-bit digital signal controllers (DSCs) for motor control designs requiring increased memory, performance or enhanced peripherals, while obtaining cost and size savings by using lower pin-count devices. Also released is a new motor control development platform based on the popular Explorer 16 development board.
Additionally, Microchip announced five motor control software solutions for power factor correction (PFC), sensorless field oriented control (FOC) of a PMSM motor, sensorless FOC of an ACIM motor, sensorless control of a BLDC motor using back-EMF filtering and sensorless BLDC control with back-EMF filtering using a majority function.
The newly announced devices come in packages as small as 6 x 6 mm, and offer up to 128 KBytes of Flash memory for large proprietary algorithms such as observer motor control models, integration of motor control algorithms with system-level control, communication stacks such as CAN and graphic libraries for displays.
Two of the new devices feature 16-bit digital-to-analog Converters (DACs) which can be used for motor noise reduction strategies or audio messaging. A user-selectable 10- or 12-bit analog-to-digital converter (ADC) is also available on-chip. In 10-bit mode, the ADC features up to four sample-and-hold circuits that can be triggered simultaneously - especially useful for synchronised sampling strategies to improve control loop performance.
All of these new DSCs have a flexible three-phase PWM controller, plus two additional PWM outputs on a separate time base which are ideal for PFC since that requires a control loop that is over 30 times faster than a typical motor control loop. PFC is increasingly required for mains-powered motors and Microchip has issued a software solution published as application note AN1106 that can be downloaded from the company's website. The new devices also feature two quadrature encoder interfaces for position-sensing applications.
For demonstration and development, the new PICtail Plus Motor Control daughter card provides an interface between the general-purpose Explorer16 Development board and existing motor drive power modules.
Further reading:
The 8-bit survival syndrome – Part 2
DSP, Micros & Memory
Just like the 4-bit pre-microcontroller, the 8-bit MCU has been finding ways to stick around. Their features and speeds have been improving, offering competitive reasons to work with them.
Read more...
Enhanced code protection for USB µC portfolio
Future Electronics
DSP, Micros & Memory
To help easily incorporate USB power and communication functionality into embedded systems, Microchip Technology has launched the AVR DU family of microcontrollers.
Read more...
General-purpose MCU with RISC-V architecture
EBV Electrolink
DSP, Micros & Memory
Renesas has released a general-purpose MCU to enhance its existing RISC-V portfolio, and this is its first MCU using a RISC-V core developed internally at the company.
Read more...
8-bit MCU with I3C support
Avnet Silica
DSP, Micros & Memory
The PIC18-Q20 8-bit microcontrollers from Microchip easily interface with devices operating in multiple voltage domains, and the built-in I3C interface supports higher-speed and lower-power data transfers than I2C.
Read more...
An evolutionary step in customisable logic
Altron Arrow
DSP, Micros & Memory
Microchip Technology is offering a tailored hardware solution with the launch of its PIC16F13145 family of microcontrollers, which are outfitted with a new Configurable Logic Block module.
Read more...
MCU for battery-powered applications
Altron Arrow
DSP, Micros & Memory
Included in ST’s family of devices is the STM32U031, an ultra-low-power MCU featuring an ARM Cortex-M0+ 32-bit core running at up to 56 MHz.
Read more...
Serial SRAM up to 4 MB
EBV Electrolink
DSP, Micros & Memory
The chips are designed to provide a lower-cost alternative to traditional parallel SRAM products, and include optional battery backup switchover circuitry in the SRAM memory to retain data on power loss.
Read more...
SiP supports LTE/NB-IoT and GNSS
RF Design
DSP, Micros & Memory
The nRF9151 from Nordic Semiconductor is an integrated System-in-Package that supports LTE-M/NB-IoT, DECT NR+ and GNSS services.
Read more...
Qi2 dsPIC33-based reference design
DSP, Micros & Memory
Powered by a single dsPIC33 Digital Signal Controller, the Qi2 reference design offers efficient control for optimised performance.
Read more...
MIKROE’s IDE now includes MPLAB XC compilers
DSP, Micros & Memory
MIKROE has announced that the latest version of its multi-architectural IDE, NECTO Studio 6.1, now includes Microchip’s MPLAB XC compilers for 8-, 16- and 32-bit MCUs.
Read more...
printer friendly version