Passive Components


Chip inductors in tiny 0402 package

28 May 2008 Passive Components

Murata has released the BLM15P series of chip ferrite bead inductors in 0402 packages. These tiny parts measure 1,0 by 0,5 by 0,5 mm, achieving a footprint that is over 60% smaller than the 0603 types offered previously, without any degradation in performance. The devices are suitable for EMI reduction on DC power lines and low-speed signal lines where the smaller packaging reduces board space.

The inductors feature extremely low DC resistance, between 0,035 and 0,090 Ω, and high rated current of up to 2,2 A. The typical impedance at 1 MHz is between 10 Ω and 120 Ω, depending on the specific part. The equivalent circuit is a series inductor and resistor, the resistance element becoming dominant at high frequencies. The BLM15P series has an operating temperature range of -55 to +125°C, with current derating becoming necessary above 85°C.





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

PCB connectors for power systems
Phoenix Contact Passive Components
With the new PC 6 PCB connectors with screw connection, Phoenix Contact’s classic connection technology is available with enhanced touch protection for the new pin connector pattern.

Read more...
Polymer caps with very high ripple current capability
RS South Africa Passive Components
TDK Corporation has released the B40910 series of hybrid polymer capacitors, which can handle up to 4,6 A at 100 kHz and 125°C.

Read more...
SPE connector range
Phoenix Contact Passive Components
Single Pair Ethernet (SPE) is a communication technology that realises Industry 4.0 and IIoT applications, and Phoenix Contact’s Combicon range are ideal for SPE connections.

Read more...
TDK expands MLCC series
RS South Africa Passive Components
TDK Corporation has expanded its CGA series of multilayer ceramic capacitors, currently being the highest capacitance in 100 V products for automotive applications.

Read more...
Inductor supports temperatures up to 150°C
RS South Africa Passive Components
TDK has launched a highly durable inductor for automotive A2B applications that supports a wide temperature range of -55 up to 150°C.

Read more...
Long-range passive infrared motion sensor
Future Electronics Passive Components
Panasonic Industry (PaPIRs) recently introduced he world’s most compact long-range passive infrared motion sensor, for installation heights of up to 15 metres.

Read more...
Isolated solid state relay
Altron Arrow Passive Components
The ISO808, ISO808-1 (PowerSO-36) and ISO808Q, ISO808Q-1 (TFQFPN32) are galvanic isolated eight-channel drivers featuring a low supply current.

Read more...
Low-profile power inductors
RS South Africa Passive Components
TDK Corporation has announced the introduction of its new PLEA85 series of high-efficiency power inductors developed for battery-powered wearables and other devices.

Read more...
Miniature capacitor for automotive applications
Avnet Abacus Passive Components
Murata has released its LLC series of multi-layer ceramic capacitors for automotive applications, that feature a reversed termination for low ESL.

Read more...
Sealed tantalum capacitors
Electrocomp Passive Components
With an operating temperature range of -55 to 125°C, with voltage derating, these capacitors have been designed especially for avionics and aerospace applications.

Read more...