Wireless gateway for smart metering

Telecoms, Datacoms, Wireless, IoT

Microwave semiconductor & tube suppliers

Radio system suppliers

RF module & subsystem suppliers

Telephony IC suppliers

Wireless system IC/module suppliers

printer friendly version

26 November 2008 Telecoms, Datacoms, Wireless, IoT

Radiocrafts and Wavecom have teamed up for the launch of a new GSM/GPRS/EDGE gateway for smart metering which embeds Wireless M-Bus and ZigBee, all in a compact form factor.

The Wireless M-Bus standard (EN 13757-4:2005) specifies the communication between water, gas, heat and electricity meters and concentrators, whereas ZigBee is a standard for monitoring and control applications using low-power radio networking.

The new solution is based on Wavecom’s Fastrack Supreme, a programmable application processor with GSM/GPRS/EDGE modem capabilities. The Fastrack Supreme comes with an open-standard interface which allows developers to add supplementary I/O connectivity and features in the form of expansion cards. Radiocrafts has developed a unique expansion card for smart metering which adds Wireless M-Bus or ZigBee to the GSM/GPRS/EDGE communications function.

The expansion card embeds Wireless M-Bus (868 MHz) or ZigBee (2,4 GHz, including high power) on interchangeable PCBs. Both versions of the card connect via a UART serial interface to the RTOS driven host controller in the Fastrack Supreme. The gateway enables manufacturers of smart metering solutions to develop devices operating on various RF networks with little design effort.

Customers can either purchase a ready-to-use expansion card from Radiocrafts, or buy only the Wireless M-Bus or ZigBee module and create their own card.

For more information contact Kevin Jurrius, Components & System Design, +27 (0)11 979 4275, [email protected], www.csdcomponents.co.za

Share this article:

SIMCom’s A7673x series
Otto Wireless Solutions Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat.1 bis module based on the ASR1606 chipset, that supports wireless communication modes of LTE-FDD, with a maximum downlink rate of 10 Mbps and a maximum uplink rate of 5 Mbps.

Read more...

Accelerating the commercialisation of the 5G IoT markets
Altron Arrow Editor's Choice Telecoms, Datacoms, Wireless, IoT
Fibocom unveils Non-Terrestrial Networks (NTN) module MA510-GL, enabling satellite and cellular connectivity to IoT applications.

Read more...

Long-range connectivity module
Avnet Silica Telecoms, Datacoms, Wireless, IoT
Digi XBee XR 868 RF Modules support the deployment of long-range connectivity applications, and support point-to-point and mesh networking protocols.

Read more...

4G LTE-M/NB-IoT connectivity reference design
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Developed around the industry-leading Nordic nRF9160 module, the platform comes complete with a newly-developed LTE antenna, ATRIA, which is pre-certified to operate over the full LTE-M and NB-IoT bands.

Read more...

Antennas to meet all connectivity requirements
Electrocomp Telecoms, Datacoms, Wireless, IoT
Kyocera AVX RF antennas meet today’s connectivity demands in the LTE, Wi-Fi, Bluetooth, GNSS, and ISM wireless bands, available in surface mount, patch or external configurations.

Read more...

Introducing SIMCom’s new A7673X series
Otto Wireless Solutions Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat 1 bis module that supports LTE-FDD, with a maximum downlink rate of 10 Mbps and an uplink rate of 5 Mbps.

Read more...

18 W monolithic microwave amplifier
RFiber Solutions Telecoms, Datacoms, Wireless, IoT
The CHA8612-QDB is a two stage, high-power amplifier operating between 7,9 and 11 GHz. The monolithic microwave amplifier can typically provide 18 W of saturated output power and 40% of power-added efficiency.

Read more...

Categories

Telecoms, Datacoms, Wireless, IoT

Wireless gateway for smart metering

Further reading:

Publications by Technews