Analogue, Mixed Signal, LSI


Capacitive touch sensor ICs

9 June 2010 Analogue, Mixed Signal, LSI

Semtech has announced the SX864x platform of capacitive sensing ICs that come in 8- and 12-channel models and feature integrated LED drivers. This platform supports a wide range of button, slider and touch wheel capacitive sensor designs that are increasingly found in white goods, mobile phones, media players, notebooks/netbooks and other consumer electronics.

The capacitive analog interface on each of the seven ICs in the SX864x platform is designed with a highly accurate ADC that provides the sensitivity to work with overlay materials more than 5 mm thick, offering robust and ESD-immune system design. With current consumption as little as 80 μA at operation, these ICs are well suited for battery-powered devices. This platform also integrates eight, 256-step LED drivers with individual intensity and linear and logarithmic fading control that is optimised for human vision.

Designers may customise various parameters such as scan time, slave address, channel gain and sensitivity thresholds in their applications without the need for new firmware development. False triggers due to environmental factors such as temperature, humidity and dust can also be eliminated via an on-chip calibration algorithm.

The devices in the SX864x platform include the 12-channel SX8643/44/45, which are offered in 5 x 5 mm 32-QFN packages; and the 8-channel SX8646/47/48/49 that come in 4 x4 mm 28-QFN packages. Semtech guarantees all of these devices to operate over the -40°C to +85°C temperature range.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

High-speed PIN diode
Altron Arrow Analogue, Mixed Signal, LSI
Vishay’s new high-speed Silicon PIN diode is able to detect both visible and near infra-red radiation over a wide spectrum range from 350 to 1100 nm.

Read more...
Analogue front end for sensor measurements
Electrocomp Analogue, Mixed Signal, LSI
The NJU9103 AFE from Nisshinbo is a tiny analogue front end, with a 16-bit resolution ADC and up to 512 x signal amplification from the programmable gain amplifier.

Read more...
Single-channel software configurable I/O
Altron Arrow Analogue, Mixed Signal, LSI
These use cases of the AD74115H include analogue output and input, digital output and input, resistance temperature detector (RTD), and thermocouple measurement capability.

Read more...
Current-sense amplifier with PWM rejection
Altron Arrow Analogue, Mixed Signal, LSI
Analog Devices’ AD8410A is a high voltage, high bandwidth current-sense amplifier that features an initial gain of 20 V/V and a 2,2 MHz bandwidth.

Read more...
Combining a LPF and ADC driver for a 20 Vp-p signal
Altron Arrow Analogue, Mixed Signal, LSI
A mixed-signal ADC driver circuit’s optimum performance depends on multiple variables: the driver’s settling time, the RC filter’s time constant, driving impedance, and the ADC sampling capacitor’s kickback current, all interact during acquisition time and contribute towards sampling errors.

Read more...
Pressure sensor with NextNav certification
EBV Electrolink Analogue, Mixed Signal, LSI
STMicroelectronics’ LPS22DF pressure sensor has received a NextNav certification, which guarantees performance and reliability for geolocation and other types of applications.

Read more...
Reference design for Raspberry Pi analogue I/O
Analogue, Mixed Signal, LSI
Analogue Devices has published a reference design for ±10 V analogue input and ±15 V analogue output for Raspberry Pi platforms.

Read more...
Multi-zone distance sensor with 90° field of view
Avnet Silica Analogue, Mixed Signal, LSI
STMicroelectronics has revealed a new FlightSense multi-zone distance sensor, with 90° field of view, to bring lifelike situational awareness to applications like home automation, computers, robots, and smart equipment.

Read more...
Six-axis IMU with Qvar sensing channel
Altron Arrow Analogue, Mixed Signal, LSI
The LSM6DSV16X from STMicroelectronics is a high-performance, low-power six-axis IMU, featuring a three-axis digital accelerometer and a three-axis digital gyroscope.

Read more...
Bidirectional current-sense amplifier with PWM
RS South Africa Analogue, Mixed Signal, LSI
The MAX49925 from Analogue Devices is a bidirectional current-sense amplifier (CSA) with an input common-mode range that extends from -40 to 76 V, making it suitable for 48 V HEV applications where there are large automotive transients.

Read more...