Analogue, Mixed Signal, LSI


Wheel speed sensor

12 September 2001 Analogue, Mixed Signal, LSI

Infineon Technologies' Smart Hall effect ICs for active wheel speed sensing require no external components and operate from 1 to 2500 Hz. With dynamic self-calibration principle the device has excellent sensitivity (min DB < 1,5 mT) and South and North pole pre-induction is possible.

The Infineon's TLE4941 signal path comprises a pair of Hall probes, spaces at 2,5 mm, a differential amplifier including a noise-limiting low-pass filter and a comparator feeding a switched current output stage.

In addition an offset cancellation feedback loop is provided by a signal-tracking A/D converter, a digital signal processor (DSP) and an offset cancellation D/A converter.

The device comes in ultra-thin P-550 package.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Antennas to meet all connectivity requirements
Electrocomp Telecoms, Datacoms, Wireless, IoT
Kyocera AVX RF antennas meet today’s connectivity demands in the LTE, Wi-Fi, Bluetooth, GNSS, and ISM wireless bands, available in surface mount, patch or external configurations.

Read more...
Stainless steel pushbutton enclosures
Electrocomp Enclosures, Racks, Cabinets & Panel Products
he HYPB series from Hammond is a hygienic type 4X stainless steel pushbutton enclosure designed for use in environments where regular high temperature, high-pressure washdowns are required.

Read more...
SMD varistors with huge surge current capability
Electrocomp Power Electronics / Power Management
TDK Corporation has introduced two new varistor series in SMD design, the larger of the two capable of handling a surge current of 10 000 A.

Read more...
High-speed PIN diode
Altron Arrow Analogue, Mixed Signal, LSI
Vishay’s new high-speed Silicon PIN diode is able to detect both visible and near infra-red radiation over a wide spectrum range from 350 to 1100 nm.

Read more...
Sealed tantalum capacitors
Electrocomp Passive Components
With an operating temperature range of -55 to 125°C, with voltage derating, these capacitors have been designed especially for avionics and aerospace applications.

Read more...
Analogue front end for sensor measurements
Electrocomp Analogue, Mixed Signal, LSI
The NJU9103 AFE from Nisshinbo is a tiny analogue front end, with a 16-bit resolution ADC and up to 512 x signal amplification from the programmable gain amplifier.

Read more...
New series of chip-type capacitors
Electrocomp Passive Components
Panasonic Industries’ SMT capacitor series all benefit from the longest lifetime plus the lowest ESR values currently available.

Read more...
Single-channel software configurable I/O
Altron Arrow Analogue, Mixed Signal, LSI
These use cases of the AD74115H include analogue output and input, digital output and input, resistance temperature detector (RTD), and thermocouple measurement capability.

Read more...
Current-sense amplifier with PWM rejection
Altron Arrow Analogue, Mixed Signal, LSI
Analog Devices’ AD8410A is a high voltage, high bandwidth current-sense amplifier that features an initial gain of 20 V/V and a 2,2 MHz bandwidth.

Read more...
SMD coupled inductors
Electrocomp Passive Components
TDK Corporation has expanded its family of flat wire inductors with the high-performance EPCOS ERUC23 coupled inductor series.

Read more...