With the PCMAT150 S24, MTM Power has introduced a new generation of AC-DC modules which can be installed as a decentralised power supply for industrial and railway applications.
From wide AC (85 – 264 V) or DC (100 – 300 V) input ranges for worldwide use in industrial networks, a 24 V d.c. output voltage is generated. The contact-cooled devices have a power-good signal as well as active power factor correction. Further features are an operating temperature of -40°C to +70°C, remote control and 150% power boost.
The design of the isolation system according to over-voltage category OV 3 enables use in applications with high transients, such as in energy technology. For use on rail vehicles, the devices were tested according to the standards of EN 50155 and EN 50121-3-2/EN 50121-4. In compliance with the conditions of the railway regulations, the units can be used on railway vehicles on the 400/230 V a.c. internal on-board train power system, in track-side applications and in stationary railway systems.
The PCMAT150 has an efficiency of 92,5% and is resistant against shock and vibration due to the well-proven encapsulation technology and its extremely rugged design. The vacuum encapsulated power supplies offer reliable protection against condensation, conductive dust and other environmental conditions.
They are connected via industrial connectors which meet the demands concerning vibration resistance, reduced wiring time and being maintenance-free, and thus their use as a plug-and-play solution in sensitive electronic sub-systems is possible. Due to the rugged design in BPC technology, the thermal losses are dissipated specifically via the mounting plate while increasing the lifetime of the devices at the same time.
Analysis of switch-mode power supply: inductor violations Altron Arrow
Editor's Choice Power Electronics / Power Management
Common switch-mode power supply (SMPS) design errors are discussed, and their appropriate rectification is specified, with details on complications that arise with the power stage design of DC-DC switching regulators.
Read more...High-speed AWG generates up to 20 sine waves Vepac Electronics
Test & Measurement
Spectrum Instrumentation has released a new firmware option for its range of versatile 16-bit Arbitrary Waveform Generators, with sampling rates up to 1,25 GS/s and bandwidths up to 400 MHz.
Read more...Compact PCB-mount SMPS RS South Africa
Power Electronics / Power Management
Traco Power’s 5W PCB-mount switch mode power supply (SMPS) offers high efficiency, and is well suited for a variety of applications in the automation, electronics, electrical and mechanical industries.
Read more...AC-DC brick PSU Conical Technologies
Power Electronics / Power Management
These PSUs have a typical efficiency of up to 92%, and a power factor value of up to 0,99. They are available in 12, 24, 28, 48 and 54 V output versions.
Read more...5 kW switching PSU range Conical Technologies
Power Electronics / Power Management
Mornsun has released a new switching power supply range, the LMF5000-25Bxx, which has a 5000 W capacity, and features universal AC input configurations.
Read more...Reliable charging range Current Automation
Power Electronics / Power Management
Whether you’re powering essential electronics, keeping emergency equipment operational, or maintaining the performance of critical machinery, the need for dependable charging solutions cannot be overstated.
Read more...Microchip expands its mSiC solutions EBV Electrolink
Power Electronics / Power Management
The highly integrated 3,3 kV XIFM plug-and-play digital gate driver is designed to work out-of-the-box with high-voltage SiC-based power modules to simplify and speed system integration.
Read more...Dual-port USB-C power delivery solution Altron Arrow
Power Electronics / Power Management
Infineon’s CYPD7272-68LQXQ is the tray packing option of the company’s dual-port USB-C power delivery solution and features an integrated dual-port USB-C PD + DC-DC controller.
Read more...Parallel redundancy power module Conical Technologies
Power Electronics / Power Management
The LIR40-40 is a wide input range DC-DC module, with a constant output of 48 V at a nominal output current of up to 40 A.
Read more...Motor protection relay front-end NewElec Pretoria
Power Electronics / Power Management
Newelec’s Motor Protection Relay front-end software isn’t just another tool, it’s a game changer that puts control firmly in your hands.
printer friendly version