Power Electronics / Power Management


DC-DC converter with integrated H-bridge

10 October 2018 Power Electronics / Power Management

Diodes Incorporated’s new AP72200 is a high-current synchronous buck/boost DC-DC converter with integrated high-side and low-side H-bridge MOSFETs. It delivers up to 97% efficiency with 1% voltage regulation accuracy, low quiescent current and very low output ripple.

The AP72200 employs proprietary buck/boost current-mode control technology to achieve excellent voltage regulation and a continuous output current of up to 2 A. The design allows for seamless transition between buck and boost operation while the wide 2,3 V to 5,5 V input voltage range provides flexibility of supply and produces between 2,6 V and 5,14 V output voltage.

The high level of integration, along with low quiescent current and wide input voltage range, make the device well suited for a wide range of portable applications including smartphones, tablets and other battery-operated consumer devices.

Many of the features of the AP72200 are user-configurable through an industry standard I²C interface, which can operate in standard mode, fast mode, fast-mode plus and high-speed mode. This includes programmable output voltage ramp-up and ramp-down slew rates, output active discharge, over-voltage protection threshold and over-current threshold.

The AP72200 can also be configured to operate in PWM or PFM mode, as well as in ultrasonic mode, which reduces the switching frequency to avoid the generation of sub-harmonic frequencies in the region of 20 kHz that can cause interference in the audible frequency range. The buck/boost output can also be disabled using the I²C interface, allowing a master device to control the operation of the regulator across a standard I²C bus. The output voltage can be set to between 2,60 V and 5,14 V in 0,02 V increments by programming the device over I²C.

The integrated H-bridge MOSFETs feature extremely low RDS(ON) of 25 mΩ and a shutdown current of less than 1 μA. Quiescent current is as low as 20 μA when operating in non-switching mode and a typical of 29 μA in PFM mode. The switching frequency in continuous switching mode is typically 2,5 MHz, dropping to 27 kHz in ultrasonic mode.

For more information contact Dirk Venter, Altron Arrow, +27 11 923 9600, [email protected], www.arrow.altech.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Analysis of switch-mode power supply: inductor violations
Altron Arrow Editor's Choice Power Electronics / Power Management
Common switch-mode power supply (SMPS) design errors are discussed, and their appropriate rectification is specified, with details on complications that arise with the power stage design of DC-DC switching regulators.

Read more...
Microsoft Windows IoT on ARM
Altron Arrow Computer/Embedded Technology
This expansion means that the Windows IoT ecosystem can now harness the power of ARM processors, known for their energy efficiency and versatility.

Read more...
Accelerating the commercialisation of the 5G IoT markets
Altron Arrow Editor's Choice Telecoms, Datacoms, Wireless, IoT
Fibocom unveils Non-Terrestrial Networks (NTN) module MA510-GL, enabling satellite and cellular connectivity to IoT applications.

Read more...
Microchip introduces ECC608 TrustMANAGER
Altron Arrow Circuit & System Protection
To increase security on IoT products and facilitate easier setup and management, Microchip Technology has added the ECC608 TrustMANAGER with Kudelski IoT keySTREAM, Software as a Service (SaaS) to its Trust Platform portfolio of devices, services and tools.

Read more...
xG26 sets new standard in multiprotocol wireless device performance
Altron Arrow AI & ML
Silicon Labs has announced its new xG26 family of Wireless SoCs and MCUs, which consists of the multiprotocol MG26 SoC, the Bluetooth LE BG26 SoC, and the PG26 MCU.

Read more...
SolidRun unveils new SoM
Altron Arrow AI & ML
SolidRun and Hailo has unveiled a game-changer for engineers and AI product developers with the launch of their market-ready SoM, which packs the cutting-edge capabilities of the Hailo-15H SoC.

Read more...
An evolutionary step in customisable logic
Altron Arrow DSP, Micros & Memory
Microchip Technology is offering a tailored hardware solution with the launch of its PIC16F13145 family of microcontrollers, which are outfitted with a new Configurable Logic Block module.

Read more...
Compact PCB-mount SMPS
RS South Africa Power Electronics / Power Management
Traco Power’s 5W PCB-mount switch mode power supply (SMPS) offers high efficiency, and is well suited for a variety of applications in the automation, electronics, electrical and mechanical industries.

Read more...
AC-DC brick PSU
Conical Technologies Power Electronics / Power Management
These PSUs have a typical efficiency of up to 92%, and a power factor value of up to 0,99. They are available in 12, 24, 28, 48 and 54 V output versions.

Read more...
5 kW switching PSU range
Conical Technologies Power Electronics / Power Management
Mornsun has released a new switching power supply range, the LMF5000-25Bxx, which has a 5000 W capacity, and features universal AC input configurations.

Read more...