pSemi has introduced the world’s first monolithic, silicon-on-insulator (SOI) Wi-Fi front-end module (FEM) – the PE561221. Ideal for Wi-Fi home gateways, routers and set-top boxes, this module uses a smart bias circuit to deliver a high-linearity signal and excellent long-packet error vector magnitude (EVM) performance.
The PE561221 combines the intelligent integration capabilities of pSemi’s SOI technology and Murata’s expertise in Wi-Fi connectivity solutions and advanced packaging. This 2,4 GHz Wi-Fi FEM integrates a low-noise amplifier (LNA), a power amplifier (PA) and two RF switches (SP4T, SP3T). The monolithic die uses a compact 16-pin, 2 x 2 mm LGA package ideal for either standalone use or in 4 x 4 MIMO and 8 x 8 MIMO modules.
The device is based on pSemi’s UltraCMOS technology platform – a patented, advanced form of SOI. With its outstanding RF and microwave properties, SOI is an ideal substrate for integration. UltraCMOS technology also enables intelligent integration through the ability to integrate RF, digital and analog components on a single die.
Through advanced analog and digital design techniques, the Wi-Fi FEM delivers excellent long-packet EVM performance with less than 0,1 dB of gain drop while operating across the entire -40°C to 85°C temperature range. At -40 dB EVM (MCS9), the output power is +19 dBm with less than 0,05 dB drop in power output after a 4 millisecond packet. The IC delivers enhanced dynamic error vector magnitude (DEVM) and current consumption without requiring digital pre-distortion (DPD), and it has excellent MCS11 performance for 802.11ax applications.
Full sensor to cloud solution CST Electronics
Telecoms, Datacoms, Wireless, IoT
NeoCortec has demonstrated the seamless and rapid development of full sensor-to-cloud solutions using NeoMesh Click boards from MikroE and the IoTConnect cloud solution from Avnet.
Read more...Long-range Wi-Fi HaLow module TRX Electronics
Telecoms, Datacoms, Wireless, IoT
One of Mouser’s newest products is the Morse Micro MM6108-MF08651-US Wi-Fi HaLow Module, which adheres to the IEEE 802.11ah standard.
Read more...Quectel launches 3GPP NTN comms module Quectel Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
Quectel Wireless Solutions has announced the Quectel BG95-S5 3GPP non-terrestrial network (NTN) satellite communication module.
Read more...SIMCom’s A7673x series Otto Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat.1 bis module based on the ASR1606 chipset, that supports wireless communication modes of LTE-FDD, with a maximum downlink rate of 10 Mbps and a maximum uplink rate of 5 Mbps.
Read more...Multi-channel cable assembly RFiber Solutions
Interconnection
Withwave’s Multi-Channel SMPM Cable Assemblies (WMCM Series) provide a wide range of multiple coax connectors and flexible cable assemblies, with a choice of 26,5, 40 and 50 GHz configurations.
Read more...Long-range connectivity module Avnet Silica
Telecoms, Datacoms, Wireless, IoT
Digi XBee XR 868 RF Modules support the deployment of long-range connectivity applications, and support point-to-point and mesh networking protocols.
Read more...4G LTE-M/NB-IoT connectivity reference design iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
Developed around the industry-leading Nordic nRF9160 module, the platform comes complete with a newly-developed LTE antenna, ATRIA, which is pre-certified to operate over the full LTE-M and NB-IoT bands.
Read more...Antennas to meet all connectivity requirements Electrocomp
Telecoms, Datacoms, Wireless, IoT
Kyocera AVX RF antennas meet today’s connectivity demands in the LTE, Wi-Fi, Bluetooth, GNSS, and ISM wireless bands, available in surface mount, patch or external configurations.
Read more...Introducing SIMCom’s new A7673X series Otto Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat 1 bis module that supports LTE-FDD, with a maximum downlink rate of 10 Mbps and an uplink rate of 5 Mbps.
printer friendly version