Analogue, Mixed Signal, LSI


Omnipolar Hall effect sensors

14 November 2018 Analogue, Mixed Signal, LSI

Diodes Incorporated introduced the AH1911/AH1921 digital Hall effect sensors, which combine stable operating and release points (BOP and BRP) with ultra low-power operation. The third-generation devices will respond to either polarity of magnetic field and use a ‘hibernating clock’ system to reduce average current consumption to 1,6 μA at 3 V supply.

A wide operating voltage range of 1,6 V to 5,5 V enables the part to be used with a variety of system voltages. Operating and release points for the magnetic switch are tightly controlled over temperature and supply voltage due to advanced stabilising techniques for accurate and repeatable performance. Flux density switching points are typically ±60 Gauss (6 mT) to operate and ±45 Gauss (4,5 mT) to release.

The AH1911/21 is ideal for battery-powered devices where the low power consumption and wider operating voltage range help to extend battery life. Typical applications include medical and consumer products, tamper detection for e-meters, smoke detectors, IoT devices and general level/proximity detection.

Available in the industry-standard three-pin SC59 package, the AH1911 and AH1921 feature push-pull and open-drain outputs, respectively. Both are specified over the -40°C to +85°C temperature range and have a high ESD rating of 6 kV (Human Body Model).

For more information contact Dirk Venter, Altron Arrow, +27 11 923 9600, [email protected], www.arrow.altech.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Analysis of switch-mode power supply: inductor violations
Altron Arrow Editor's Choice Power Electronics / Power Management
Common switch-mode power supply (SMPS) design errors are discussed, and their appropriate rectification is specified, with details on complications that arise with the power stage design of DC-DC switching regulators.

Read more...
Microsoft Windows IoT on ARM
Altron Arrow Computer/Embedded Technology
This expansion means that the Windows IoT ecosystem can now harness the power of ARM processors, known for their energy efficiency and versatility.

Read more...
Accelerating the commercialisation of the 5G IoT markets
Altron Arrow Editor's Choice Telecoms, Datacoms, Wireless, IoT
Fibocom unveils Non-Terrestrial Networks (NTN) module MA510-GL, enabling satellite and cellular connectivity to IoT applications.

Read more...
Microchip introduces ECC608 TrustMANAGER
Altron Arrow Circuit & System Protection
To increase security on IoT products and facilitate easier setup and management, Microchip Technology has added the ECC608 TrustMANAGER with Kudelski IoT keySTREAM, Software as a Service (SaaS) to its Trust Platform portfolio of devices, services and tools.

Read more...
xG26 sets new standard in multiprotocol wireless device performance
Altron Arrow AI & ML
Silicon Labs has announced its new xG26 family of Wireless SoCs and MCUs, which consists of the multiprotocol MG26 SoC, the Bluetooth LE BG26 SoC, and the PG26 MCU.

Read more...
SolidRun unveils new SoM
Altron Arrow AI & ML
SolidRun and Hailo has unveiled a game-changer for engineers and AI product developers with the launch of their market-ready SoM, which packs the cutting-edge capabilities of the Hailo-15H SoC.

Read more...
An evolutionary step in customisable logic
Altron Arrow DSP, Micros & Memory
Microchip Technology is offering a tailored hardware solution with the launch of its PIC16F13145 family of microcontrollers, which are outfitted with a new Configurable Logic Block module.

Read more...
MCU for battery-powered applications
Altron Arrow DSP, Micros & Memory
Included in ST’s family of devices is the STM32U031, an ultra-low-power MCU featuring an ARM Cortex-M0+ 32-bit core running at up to 56 MHz.

Read more...
LoRaWAN-certified sub-GHz module
Altron Arrow Telecoms, Datacoms, Wireless, IoT
The STM32WL5M from ST Microelectronics is the company’s first LoRaWAN-certified module which incorporates two cores, one of them being a wireless stack to optimise the creation of sub-GHz applications.

Read more...
Dual-port USB-C power delivery solution
Altron Arrow Power Electronics / Power Management
Infineon’s CYPD7272-68LQXQ is the tray packing option of the company’s dual-port USB-C power delivery solution and features an integrated dual-port USB-C PD + DC-DC controller.

Read more...