Telecoms, Datacoms, Wireless, IoT


Cellular module for LPWA applications

31 July 2019 Telecoms, Datacoms, Wireless, IoT

u-blox has announced the SARA R5 series of LTE M and NB-IoT modules for low-power wide-area (LPWA) IoT applications.

The secure element is compliant with EAL5+ High common criteria certification, which makes the module well suited to protect sensitive assets and communications. It also features a lightweight and low-power pre-shared key (PSK) management system that is tailored to the needs of IoT applications, along with a comprehensive set of security features.

SARA R5 comes in two product variants. Featuring a built-in M8 GNSS receiver, the R511M targets mobile applications in the automotive, fleet management, tracking and telematics sectors. The GNSS receiver’s chip-down design includes a dedicated GNSS antenna interface and can run in parallel with the cellular connection.

The second product variant, SARA R510M, is optimised to deliver the lowest achievable power consumption, drawing less than 1 µA of current in power save mode, making it ideal for metering, smart city, connected health, security and surveillance, remote monitoring and other battery powered applications.

For more information contact Andrew Hutton, RF Design, +27 21 555 8400, [email protected]



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Antennas to meet all connectivity requirements
Electrocomp Telecoms, Datacoms, Wireless, IoT
Kyocera AVX RF antennas meet today’s connectivity demands in the LTE, Wi-Fi, Bluetooth, GNSS, and ISM wireless bands, available in surface mount, patch or external configurations.

Read more...
Introducing SIMCom’s new A7673X series
Otto Wireless Solutions Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat 1 bis module that supports LTE-FDD, with a maximum downlink rate of 10 Mbps and an uplink rate of 5 Mbps.

Read more...
18 W monolithic microwave amplifier
RFiber Solutions Telecoms, Datacoms, Wireless, IoT
The CHA8612-QDB is a two stage, high-power amplifier operating between 7,9 and 11 GHz. The monolithic microwave amplifier can typically provide 18 W of saturated output power and 40% of power-added efficiency.

Read more...
LoRaWAN-certified sub-GHz module
Altron Arrow Telecoms, Datacoms, Wireless, IoT
The STM32WL5M from ST Microelectronics is the company’s first LoRaWAN-certified module which incorporates two cores, one of them being a wireless stack to optimise the creation of sub-GHz applications.

Read more...
3D depth sensing sensor
Avnet Silica Telecoms, Datacoms, Wireless, IoT
A recent announcement by STMicroelectronics has revealed an all-in-one, direct Time-of-Flight (dToF) 3D LiDAR (Light Detection And Ranging) module with 2,3k resolution.

Read more...
Nordic expands nRF91 series
RF Design DSP, Micros & Memory
Nordic Semiconductor has announced the expansion of its nRF91 series cellular IoT devices with the introduction of the nRF9151 System-in-Package (SiP).

Read more...
Quectel announces module for RedCap comms
Quectel Wireless Solutions Telecoms, Datacoms, Wireless, IoT
The Quectel RG255G offers downlink performance of 220 Mbps, and uplink performance of 121 Mbps on 256QAM or 91 Mbps on 64QAM.

Read more...
Wide-Bandgap Developer Forum
Infineon Technologies Telecoms, Datacoms, Wireless, IoT
This year marks a new chapter for this exclusive event series – all specialist presentations will be broadcasting live from a studio in Munich.

Read more...
Multimode smart LTE module with GNSS
Quectel Wireless Solutions Telecoms, Datacoms, Wireless, IoT
The AW200Z LTE module is equipped with Bluetooth and Wi-Fi functionalities, and is powered by Qualcomm's advanced 64-bit quad-core Cortex-A53 processors, coupled with an integrated Adreno 702 GPU.

Read more...
LEXI-R10 series cellular module
RF Design Telecoms, Datacoms, Wireless, IoT
The LEXI-R10 Series from u-blox are LTE Cat 1 bis modules that support multi-band LTE-FDD, and are designed for size-constrained devices.

Read more...