Atlanta Micro has launched a new line of connectorised modules for some of its most popular parts. These modules are made of aluminium and offer RF shielding along with field-replaceable SMA connectors and mounting holes.
The first available modules include any of the company’s 3 mm amplifiers such as the AM1016, AM1018, AM1025B, AM1063-1 and AM1064-1. The module version of these parts are designated with a ‘-M’ at the end (for example AM1064-M). The amplifier module is 3,05 x 2,54 x 1,524 cm with SMA input and output and a feedthrough capacitor to bias tee that powers the device. These modules are ideal for lab use and/or prototype systems.
The first available filter module is the AM3025A which is designated as the AM3025A-M. This filter module provides a sub-octave pre-selector filter bank from 400 MHz to 6 GHz with a filter bypass path. With dimensions of 4,7 x 4,7 x 1,65 cm, field-replaceable SMA connectors and power/control over USB, this module is ideally suited for in-lab use, receiver protection, and a variety of EMI reduction applications.
Atlanta Micro also announced that a future line of modules will be available by the end of September 2019. In addition to the above, it will offer its popular bypassable amplifiers such as the AM1065, AM1067 and AM1081 in the same form factor of 3,05 x 2,54 x 1,524 cm.
The company will also be offering a ‘choose your own’ bandpass filter solution in which customers may choose any digitally tuneable low-pass filter and any digitally tuneable high-pass filter from its digitally tuneable filter catalogue. This module will be available in the same form factor of 4,7 x 4,7 x 1,524 cm and will also offer power/control over USB.
The final two planned modules from Atlanta Micro will be its AM3023B and AM3060 filter solutions. These two filters will be available in 5,334 x 5,334 x 1,65 cm modules and will offer control over USB and an external voltage pin to power the amplifiers inside.
Full sensor to cloud solution CST Electronics
Telecoms, Datacoms, Wireless, IoT
NeoCortec has demonstrated the seamless and rapid development of full sensor-to-cloud solutions using NeoMesh Click boards from MikroE and the IoTConnect cloud solution from Avnet.
Read more...Long-range Wi-Fi HaLow module TRX Electronics
Telecoms, Datacoms, Wireless, IoT
One of Mouser’s newest products is the Morse Micro MM6108-MF08651-US Wi-Fi HaLow Module, which adheres to the IEEE 802.11ah standard.
Read more...Quectel launches 3GPP NTN comms module Quectel Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
Quectel Wireless Solutions has announced the Quectel BG95-S5 3GPP non-terrestrial network (NTN) satellite communication module.
Read more...SIMCom’s A7673x series Otto Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat.1 bis module based on the ASR1606 chipset, that supports wireless communication modes of LTE-FDD, with a maximum downlink rate of 10 Mbps and a maximum uplink rate of 5 Mbps.
Read more...Multi-channel cable assembly RFiber Solutions
Interconnection
Withwave’s Multi-Channel SMPM Cable Assemblies (WMCM Series) provide a wide range of multiple coax connectors and flexible cable assemblies, with a choice of 26,5, 40 and 50 GHz configurations.
Read more...Long-range connectivity module Avnet Silica
Telecoms, Datacoms, Wireless, IoT
Digi XBee XR 868 RF Modules support the deployment of long-range connectivity applications, and support point-to-point and mesh networking protocols.
Read more...4G LTE-M/NB-IoT connectivity reference design iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
Developed around the industry-leading Nordic nRF9160 module, the platform comes complete with a newly-developed LTE antenna, ATRIA, which is pre-certified to operate over the full LTE-M and NB-IoT bands.
Read more...Antennas to meet all connectivity requirements Electrocomp
Telecoms, Datacoms, Wireless, IoT
Kyocera AVX RF antennas meet today’s connectivity demands in the LTE, Wi-Fi, Bluetooth, GNSS, and ISM wireless bands, available in surface mount, patch or external configurations.
Read more...Introducing SIMCom’s new A7673X series Otto Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat 1 bis module that supports LTE-FDD, with a maximum downlink rate of 10 Mbps and an uplink rate of 5 Mbps.
printer friendly version