CVSD voice codec

Telecoms, Datacoms, Wireless, IoT

Microwave semiconductor & tube suppliers

Radio system suppliers

RF module & subsystem suppliers

Telephony IC suppliers

Wireless system IC/module suppliers

printer friendly version

23 October 2002 Telecoms, Datacoms, Wireless, IoT

Adding to its existing range of call progress and tone detector ICs, CML Microcircuits has released a call progress and 'voice' detector for wireline telecom applications. The real asset to this standard call-progress detection product is its ability to detect actual voice or music on the line. This offers real time and cost savings to both the telecoms operator and user.

The CMX683 is a general purpose call progress tone detector for use in monitoring the progress of calls in public switched telephone networks (PSTN) applications. 'Dial Tone', 'Ringing', 'Busy' and 'Unobtainable' states can be distinguished by using the host microcontroller to qualify the cadence of the detected output. Separate outputs integrate the 'voice' activity over both shorter and longer periods, enabling payphone and other billing systems to commence charging only when a line connection has been established.

Using advanced digital techniques to characterise valid call progress tones, unwanted tones, line noise and voice or music signals, the CMX683 has superior sensitivity and low false detection rate. With low power operation at 2,7 V the device is available in 8-pin DIP and 16-pin TSSOP or SOIC packaging.

For more information contact Avnet Kopp, 011 809 1600, [email protected]

Share this article:

SIMCom’s A7673x series
Otto Wireless Solutions Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat.1 bis module based on the ASR1606 chipset, that supports wireless communication modes of LTE-FDD, with a maximum downlink rate of 10 Mbps and a maximum uplink rate of 5 Mbps.

Read more...

Accelerating the commercialisation of the 5G IoT markets
Altron Arrow Editor's Choice Telecoms, Datacoms, Wireless, IoT
Fibocom unveils Non-Terrestrial Networks (NTN) module MA510-GL, enabling satellite and cellular connectivity to IoT applications.

Read more...

Long-range connectivity module
Avnet Silica Telecoms, Datacoms, Wireless, IoT
Digi XBee XR 868 RF Modules support the deployment of long-range connectivity applications, and support point-to-point and mesh networking protocols.

Read more...

4G LTE-M/NB-IoT connectivity reference design
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Developed around the industry-leading Nordic nRF9160 module, the platform comes complete with a newly-developed LTE antenna, ATRIA, which is pre-certified to operate over the full LTE-M and NB-IoT bands.

Read more...

Antennas to meet all connectivity requirements
Electrocomp Telecoms, Datacoms, Wireless, IoT
Kyocera AVX RF antennas meet today’s connectivity demands in the LTE, Wi-Fi, Bluetooth, GNSS, and ISM wireless bands, available in surface mount, patch or external configurations.

Read more...

Introducing SIMCom’s new A7673X series
Otto Wireless Solutions Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat 1 bis module that supports LTE-FDD, with a maximum downlink rate of 10 Mbps and an uplink rate of 5 Mbps.

Read more...

18 W monolithic microwave amplifier
RFiber Solutions Telecoms, Datacoms, Wireless, IoT
The CHA8612-QDB is a two stage, high-power amplifier operating between 7,9 and 11 GHz. The monolithic microwave amplifier can typically provide 18 W of saturated output power and 40% of power-added efficiency.

Read more...

Categories

Telecoms, Datacoms, Wireless, IoT

CVSD voice codec

Further reading:

Publications by Technews