Design Automation


Achieving lower overall cost with DfM

23 April 2014 Design Automation

It’s all about connections. Not simply those that designers make to define their circuit or the ones that circuit board manufacturers create to fabricate the PCB (printed circuit board); it’s about connecting the design intent with PCB manufacturing capabilities and assembly requirements.

Without these connections, the PCBA (PCB assembly) will not have the manufacturing robustness or process yield needed to provide the lowest cost of ownership. And let’s face it, no matter how jazzy the design, if it can’t be built across a wide manufacturing base with reasonable yields, and assembled at a number of contract manufacturers with similar performance, the total cost is going to be too high and the project is not going to meet profitability targets.

Design for Manufacture (DfM) is not a new concept. Design rule checking tools for PCBs have been available for more than 25 years. Simple design rule checks are often the first step in designing profitability into a project. Many of these tools use industry standard guidelines such as those published by the IPC to determine whether or not the schematic design and layout fall within generally established manufacturing tolerances.

These tolerances can be based on the actual manufacturing practices of the PCB/PCBA supply partner (preferred), the OEM/ODM’s body of knowledge or general guidelines provided in the industry’s standards.

Designers today are isolated from the PCB manufacturing process and many don’t have access to specific information on manufacturing capabilities or tolerances. They rely on a manufacturing partner, like NCAB Group, to provide them with up-to-date information on manufacturing capabilities.

When I talk with a designer who is not familiar with the PCB manufacturing or assembly process, I invite them to come on a tour of one of our facilities and spend a few hours on a basic PCB training course. Feedback from participants has been overwhelmingly positive. Armed with first-hand knowledge about the PCB fabrication and assembly processes, manufacturing tolerances and industry standards can be more effectively used to form the basis of a well-designed PCB.

A few of the IPC design guidelines are listed below. This is not meant to be an exhaustive list. For more detailed information on the best guidelines for your specific project contact your local NCAB representative (in South Africa this is EDA Technologies; see contact details below) for recommendations.

IPC-2221B – Generic Standard on Printed Board Design

Released in 2013, this replaces 2221A which was released in 2003. Revisions in IPC-2221B provide design guidance on via protection, testing and final finish selection, giving designers who have a basic PCB manufacturing understanding more information to make informed decisions about the printed circuit board design and materials of construction.

IPC-2222A – Sectional Design Standard for Rigid Organic Printed Boards.

Released in 2010, this supersedes IPC-2222 which was originally released in 1998.

IPC-2223B – Sectional Design Standard for Flexible Printed Boards

The B revision was released in 2008.

IPC-2226 – Sectional Design Standard for High Density Interconnect (HDI) Printed Boards

Released in 2003; first revision.

IPC-2152 – Standard for Determining Current-carrying Capacity in Printed Boards

Released in 2009, this replaced the out-of-date conductor sizing chart that was used in the older versions of IPC-2221.

There are many DfM tools available today. The goal of these tools is to evaluate the design based on a set of established rules and flag areas in the design where these rules have been violated or where the manufacturing process window has been narrowed to a point where it may impact yields.

The basic difference between systems that are used for DfM often comes down to who is using them and where they are going to be applied in the process. The ideal situation is to bring DfM and that essential design-to-manufacture connection right to the beginning of the design process. This approach provides an early connection between design intent (functionality) and manufacturing capability with an eye to the specific requirements of the assembly and test environments.

When using concurrent engineering methodologies, each step of the design process is optimised so that yields are improved across the board. This begins with the placement of components and continues with the routing of critical nets and board layout. Manufacturability criteria can be validated before the layout is finalised using this holistic strategy.

When the design is complete, all aspects can be reconfirmed across the entire manufacturing platform; checking that PCB fabrication, assembly and test criteria are optimised for performance and yield. If issues are found, they can be resolved quickly and by the part owners before the project is released to manufacturing.

If no concurrent DfM strategies have been used, the PCB manufacturer can employ a pre-production CAM system that will evaluate the design looking for specific design rule violations before the part is released to the manufacturing floor.

Design rule checkers highlight violations and provide guidelines for design optimisation to improve PCB manufacturing yields. Examples include a flag on a same net spacing violation or a more fundamental issue such as a connectivity error. The downside of this approach is that resolving even simple violations may result in a project delay or even a re-spin of the design.

The need for DfM early in the design process is more important now than it has ever been. There are two main factors that drive this need for early involvement: increased PCB complexity; and today’s global manufacturing base. High-volume production that is going to be manufactured offshore needs to be designed to meet that objective.

As an example, there are regional materials sets that offer cost advantages and have performance characteristics to match domestic brands. Knowing which materials are available from offshore manufacturers is another advantage of working with a global company – such as NCAB Group – which can help to design costs out of products by helping choose the best materials to meet the overall project requirements.

In summary, the earlier in the project that potential manufacturing issues are identified, the shorter the overall development time will be. As a result, development cost will be lower and time-to-market faster.

The sooner the designer and the design make that connection to real world manufacturing requirements, the faster the project can be delivered and the lower the overall costs will be. Designing with the manufacturing location in mind will optimise material sets. And working with PCB experts like NCAB Group early in the design cycle, from concept through prototyping and into production, will make every project a winning one.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

High-speed design seminar
EDA Technologies News
EDA Technologies has announced a comprehensive 4-day in-person course covering all aspects of the high-speed design process in collaboration with Chuck Corley.

Read more...
Webinar: High speed PCB design and manufacture
EDA Technologies Manufacturing / Production Technology, Hardware & Services
In this webinar the complexities involved in designing high-speed PCBs, that are manufacturable and reliable, will be explored.

Read more...
New camera module targets AI and computer vision
Vepac Electronics Design Automation
Innodisk has announced its shift towards the AI industry with half of its AI development related to image recognition.

Read more...
Engineering the future of automation
Design Automation
As the next great leap forward in mechanisation, industrial automation integrates data into the manufacturing equation through high-input sensors and sensor infrastructures.

Read more...
Webinar series: PCB design
EDA Technologies News
EDA Technologies has been supporting the electronics industry for over 25 years with up-to-date knowledge on PCB design and manufacture, and to aid in helping design a PCB right the first time, EDA is offering free webinars for the month of February.

Read more...
Altium Designer 22.7 released
EDA Technologies Manufacturing / Production Technology, Hardware & Services
Altium has released version 22.7 of Altium Designer schematic and PCB layout software which focuses on commenting and secure repository management features.

Read more...
Fusion 360 gains Ultra Librarian electronics CAD library
Design Automation
Autodesk collaborated with Ultra Librarian to generate this Fusion 360-compatible app that provides users with free verified schematic symbols, PCB footprints, 3D STEP models, and reference designs.

Read more...
ST releases new reference designs for STM32
Altron Arrow Design Automation
ST Microelectronics has released reference designs for the STM32WL5x and STM32WLEx, allowing new applications to be quickly prototyped.

Read more...
TI releases top five power design tools
Altron Arrow Design Automation
Texas Instruments has released an online resource combining the top five power design tools available to aid in the next electronic project design.

Read more...
Webinar: How to use Flex and Rigid-Flex PCBs
EDA Technologies Manufacturing / Production Technology, Hardware & Services
Attend a joint webinar by Altium and AT&S on various PCB design topics including designing with Rigid-Flex and flexible PCBs.

Read more...