mobile | classic
Dataweek Electronics & Communications Technology Magazine





Follow us on:
Follow us on Facebook Share via Twitter Share via LinkedIn


Search...

Electronics Buyers' Guide

Electronics Manufacturing & Production Handbook 2017


 

Smart display I/O expansion shield
19 July 2017, Computer/Embedded Technology

With the objective of helping both the maker community and professional engineers, Bridgetek is continuing to add new hardware to its CleO smart display platform. Compatible with both the CleO35 3,5” and CleO50 5” TFT formats, the new CleOIO-Shield is an input/output expansion shield that connects directly on to the NerO system controller board. It provides the CleO system with greater interfacing capabilities covering analog, digital, I²C, SPI and UART.

The additional I/O functions made available by this shield can be connected through either the CleO’s Arduino Uno interface, a MikroBus header or the Grove-Universal 4-pin connector option. The new shield (which measures 70 x 53 x 21 mm) comes with a collection of daughter boards as part of the package, offering engineers a variety of different functions that can be easily integrated into their design. A rotary potentiometer module, a temperature/humidity sensing module, a voltmeter module, a light sensing module and a microphone module are all included. In addition, an FM radio functional block plus a 4-pin to 2-pin x 2 speaker cable are included.

The company also introduced two more development modules for its award-winning Embedded Video Engine (EVE) graphics controllers. The ME812AU-WH50R and ME813AU-WH50C have resistive and capacitive touchscreens respectively. Each of them features a 5,0”, 800 x 480 pixel resolution TFT display (with a bezel for the ME812AU-WH50R version) supporting both landscape and portrait viewing modes. Dimmable backlighting and audio amplifier (capable of driving a 1 W speaker) functions are incorporated. Thanks to their built-in USB-to-SPI bridging technology, these modules act as USB peripheral devices and are thus straightforward to access from a PC or any other form of USB host.

For more information contact Fernando Da Silva, Electrocomp, +27 (0)11 458 9000, fernando@electrocomp.co.za, www.electrocomp.co.za


Credit(s)
Supplied By: Electrocomp
Tel: +27 11 458 9000
Fax: +27 11 458 9034/5
Email: andrew@electrocomp.co.za
www: www.electrocomp.co.za
  Follow us on Facebook Share via Twitter Share via LinkedIn    

Further reading:

  • Biometric fingerprint reader module
    16 August 2017, ICORP Technologies, Computer/Embedded Technology
    The GT-521F52 from ADH-tech is a high-performance fingerprint module that can be awakened by a finger touching the metal frame of the sensor. It is a one-chip module designed for integration into products ...
  • Industrial IoT gateway
    16 August 2017, Rugged Interconnect Technologies, Telecoms, Datacoms, Wireless, Computer/Embedded Technology
    Adlink’s new Matrix MXE-110i industrial IoT gateway, supporting Intel Gateway Solutions for the Internet of Things (IoT), provides versatile RF connectivity and fanless rugged construction, all in a more ...
  • Clamp AC current sensor
    16 August 2017, Electrocomp, Test & Measurement
    TDK has expanded its CCT series of clamp AC current sensors with a new 600 A type, positioning its product lineup to meet the high-current sensing needs of energy management systems (EMS) for buildings, ...
  • Electrocomp holds successful technical seminars
    19 July 2017, Electrocomp, News
    The Electrocomp Group once again held its ‘SA Best’ technical training seminar series on 16 May at Gallagher Convention Centre in Johannesburg; 17 May at Sica’s Guest House in Durban; and 18 May at Stellenbosch ...
  • Development kit for Intel RealSense
    19 July 2017, RS Components (SA), Computer/Embedded Technology
    Available from RS Components is the Intel RealSense SR300 development kit, which is ideal for software development, prototyping and depth-sensing evaluation in a wide range of applications, such as full-hand ...
  • A fault tolerant, fully distributed RTOS
    19 July 2017, Computer/Embedded Technology
    As the world is moving towards ‘smarter’ systems, often embedded, and our life and society is becoming dependent on their uninterrupted operation, fault tolerance is becoming a prime requirement. Just ...
  • Choosing the right mezzanine module for embedded systems
    19 July 2017, Rugged Interconnect Technologies, This Week's Editor's Pick, Computer/Embedded Technology
    Open architecture embedded systems for military/aerospace applications have always relied on mezzanine or daughter cards to provide flexibility and modularity because they are very effective in handling ...
  • 64-bit single-board computer
    19 July 2017, Electrocomp, Computer/Embedded Technology
    The Pine A64 single-board computer is based on a 1,2 GHz quad-core ARM Cortex A53 64-bit processor that executes both 64- and 32-bit code for scalable performance. Two models are available. The ‘Basic’ ...
  • High-voltage contactors
    19 July 2017, Avnet South Africa, Electrocomp, Switches, Relays & Keypads
    TDK’s new HVC200A is a bipolar high-voltage contactor for the switching of high DC voltages and currents. It is designed for operating voltages of up to 450 V d.c. and a high continuous current of 200 ...
  • Passive component design kit for IoT
    14 June 2017, Electrocomp, Passive Components
    AVX has released a new IoT design kit. Comprised of a broad sampling of passive components ideally suited for use in the three primary IoT device networks – input voltage filtering and decoupling networks, ...
  • Development board for Xilinx Zynq SoC
    14 June 2017, Avnet South Africa, Computer/Embedded Technology
    Avnet recently introduced the compact and cost-effective MiniZe Zynq SoC development platform, providing an entry-level development and demonstration platform for single-core Xilinx Zynq-7000 ‘all programmable’ ...
  • NTC inrush current limiters data book
    17 May 2017, Electrocomp, Technical Literature
    TDK has produced a fully revised data book for EPCOS NTC inrush current limiters, including the new P27 series with a lead spacing of 7,5 mm. These components have a disk thickness of 7 mm and are designed ...

 
 
         
Contact:
Technews Publishing (Pty) Ltd
1st Floor, Stabilitas House
265 Kent Ave, Randburg, 2194
South Africa
Publications by Technews
Dataweek Electronics & Communications Technology
Electronic Buyers Guide (EBG)

Hi-Tech Security Solutions
Hi-Tech Security Business Directory

Motion Control in Southern Africa
Motion Control Buyers’ Guide (MCBG)

South African Instrumentation & Control
South African Instrumentation & Control Buyers’ Guide (IBG)
Other
Terms & conditions of use, including privacy policy
PAIA Manual





 

         
    Classic | Mobile

Copyright © Technews Publishing (Pty) Ltd. All rights reserved.