Enclosures, Racks, Cabinets & Panel Products


Flanged extruded aluminium enclosures

25 March 2020 Enclosures, Racks, Cabinets & Panel Products

Hammond Manufacturing is launching the 1455F flanged extruded aluminium enclosures, which add a further variant to the popular 1455 standard family, giving further options to the 1457 IP65 sealed version, the 1457-EMI screened variants and the 1455HD thermally efficient units.

The 1455F features a completely new extrusion that incorporates a flat base with integral mounting flanges that extend beyond the body of the unit to facilitate mounting the units to a wall, bulkhead or machine. Two sizes are initially available and others will follow. Both the launch sizes are designed to accept 50 mm wide, 1,6 mm thick PCBs with lengths of either 80 or 120 mm.

Initial body sizes are 80 x 54 x 23 mm and 120 x 54 x 23 mm; the overall width is 77 mm including the two mounting flanges. The mounting flanges are finished with two notches on each side to accept securing screws. Other features include:

• Completely flat base for neat mounting of the unit to a surface.

• Two removable aluminium end panels for easy modification.

• Available in a clear or black anodised finish.

• Four alternative horizontal mounting positions for the PCB.


Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Rugged enclosures in shallower form factor
25 November 2020, Electrocomp , Enclosures, Racks, Cabinets & Panel Products
The diverse applications that use Hammond Manufacturing’s 1554 and 1555 IP68, UL listed polycarbonate and IP66 ABS enclosure families continues to expand as sub-systems and HMI units are installed in ...

Read more...
Help for choosing the ideal MOV surge suppressor
25 November 2020, Electrocomp , Circuit & System Protection
Almost every designer knows about metal oxide varistors (MOVs). These bidirectional and non-linear surge suppressor devices are ubiquitous in a large variety of applications to limit voltage during a ...

Read more...
Industrial stainless steel enclosures
25 November 2020, Electrocomp , Enclosures, Racks, Cabinets & Panel Products
Hammond Manufacturing’s EJSS family is available in an unpainted smooth, brushed finish in 304 or 316 grade stainless steel. Sealed to IP66, it is designed for use as an instrument enclosure, an electric, ...

Read more...
CO2 sensor for indoor air quality applications
25 November 2020, Electrocomp , Analogue, Mixed Signal, LSI
With dimensions of just 10,1 x 10,1 x 6,5 mm, the SCD40 from Sensirion’s footprint has been miniaturised by a factor of five compared to its predecessor, the SCD30. Using the photoacoustic sensing principle, ...

Read more...
AEC-Q200 compliant line filters
28 October 2020, Electrocomp , Circuit & System Protection
Bourns Magnetics Product Line is introducing the Model DR334A line filter series. These filters are constructed with a ferrite toroid core delivering compact size and high impedance over a broad frequency ...

Read more...
Rugged three-phase AC filter capacitors
30 September 2020, Electrocomp , Passive Components
TDK introduced two new series of EPCOS power capacitors for AC filtering in three-phase delta connection applications. The B32375* series is designed for the low to medium power range and covers a capacitance ...

Read more...
High-speed protectors for automotive circuits
30 September 2020, Electrocomp , Circuit & System Protection
Bourns announced the release of the AEC-Q101 compliant Model TBU-CA-Q High-Speed Protector series. These products are low-capacitance, single bidirectional high-speed protection components, constructed ...

Read more...
Enclosures for small table-top instruments
30 September 2020, Avnet Abacus , Enclosures, Racks, Cabinets & Panel Products
The Evotec range of table-top plastic enclosures, made by OKW, is suitable for tough working environments in applications such as measurement and control engineering, IT, medical, laboratory and environmental ...

Read more...
Enclosures for mounting electronic applications
30 September 2020, Sivan Electronic Supplies , Enclosures, Racks, Cabinets & Panel Products
Available from Gainta is a range of plastic enclosures for mounting and assembly of general electronic applications. The bases of the cases have a mounting flange and incorporate a tongue and groove ...

Read more...
Stylish new plastic enclosure family
30 September 2020, Electrocomp , Enclosures, Racks, Cabinets & Panel Products
Hammond Electronics has announced its new 1557 family. Initially available in four plan sizes, each in two heights, it is available in polycarbonate sealed to IP68 and ABS designed to meet IP66. The sizes ...

Read more...