Enclosures, Racks, Cabinets & Panel Products

Optional inner panels for IP68/66 plastic enclosures

30 March 2022 Enclosures, Racks, Cabinets & Panel Products

Hammond Manufacturing’s 1557 family has proved to be very popular since it was launched some two years ago and is increasingly being used as a housing for electromechanical components as well as PCB-mounted systems. This has led to the company introducing inner panels as another accessory.

Available for all sizes, the 2 mm aluminium panels are screwed into the existing PCB bosses in either or both the lid and base to give a rigid surface for mounting heavier electrical, electromechanical and electronic components. The 1557's modern, attractive, rounded styling is available in IP68 polycarbonate for indoor and outdoor use, and economical IP66 rated ABS for indoor use. There are four plan sizes, each with two heights, all available in black and light grey.

The 1557 can be used as a desktop enclosure when fitted with the supplied feet, pole-mounted using the accessory kit, or wall-mounted with either four mounting brackets for heavy-duty use or two keyhole mountings when flush-fitting is required. It is available in an 80 x 80 mm size with a height of 45 or 60 mm, and in 120 x 120 mm, 160 x 160 mm and 200 x 200 mm with heights of 45 and 70 mm.


Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

TDK announces robust varistors with 14 mm disk diameter
Electrocomp Passive Components
The new AdvanceD series of varistors have a wide operating voltage range up to 625 V and offer a surge current capability of 3000 A.

Compact varistors offer surge capability of 6000 A
Electrocomp Circuit & System Protection
TDK has released the new EPCOS B72314S2* series of leaded disk varistors which cover a wide operating voltage range of 175 VRMS to 625 VRMS.

Short body USB-A with no compromise on performance
Electrocomp Interconnection
The all-new USB1125 connector from GCT with a minimal PCB footprint of just 13mm2 is 25% smaller than full-size equivalents.

Bourns releases new series of power inductors
Electrocomp Power Electronics / Power Management
Constructed with a magnetic-silica coating to the perimeter of the inductor winding to provide effective shielding, these inductors release lower magnetic field radiation compared to non-shielded inductors.

IP68 sealed enclosures from Hammond Manufacturing
Electrocomp Enclosures, Racks, Cabinets & Panel Products
Hammond Manufacturing has introduced the 1551W series, IP68 sealed versions of its popular 1551 miniature enclosure family, in five initial sizes.

New series of power ribbon wire-wound resistors
Electrocomp Power Electronics / Power Management
This QL/QRZG series of high-power resistors have a high-power load up to 2500 W and are suitable for applications such as industrial braking, EV battery packs and charging stations.

No need for custom enclosures thanks to rugged subrack system
Vepac Electronics Enclosures, Racks, Cabinets & Panel Products
The KM6-HD subrack range from Verotec meets the requirements of IEEE 1101.10 and 11, which expand on IEC60297 to add functionality required for modern industrial computing applications. This includes ...

Surface-mount resettable fuses
Electrocomp Passive Components
The new series of fuses, suitable for overcurrent and thermal protection, expand the hold current up to 6 A and the maximum voltage to 33 V DC.

Extruded aluminium enclosures
Sivan Electronic Supplies Enclosures, Racks, Cabinets & Panel Products
The extruded aluminium enclosures of Gainta’s ALUG7XX series are available in different sizes, with lengths suitable for indoor desktop device or outdoor wall-mounting junction/control box use. Five ...

Conduction-cooled electronics cases
Actum Electronics Enclosures, Racks, Cabinets & Panel Products
As electronics and processing systems become smaller and smaller, the need for versatile, compact form-factor cases that allow efficient heat dissipation increases. nVent Schroff offers customisable conduction-cooled ...