Power Electronics / Power Management


Off-grid with a second life

28 February 2022 Power Electronics / Power Management

Revov is a local company specialising in selling batteries into various verticals, from industrial to residential. The batteries it sells are not the usual lead-acid batteries, but lithium iron phosphate (LFP) batteries.


Lance Dickerson.

Lance Dickerson, one of the founders of Revov, has many years of experience in the telecoms industry in various African countries where he learned the value of reliable batteries in areas where the electricity supply could not be relied upon to keep communications going 24x7.

On his return to South Africa, Revov was started as a distributor for BYD batteries. BYD is the largest manufacturer of electric vehicles and accessories in the world. These LFP batteries are used in a variety of vehicles, but reach the end of their working life (specifically their working life in vehicles, not the batteries; overall working life) after between 1500 and 1800 cycles. Since the batteries are designed for between 5000 and 7000 cycles, Dickerson saw an opportunity to sell what Revov calls second-life batteries into the local market. (The company also supplies new LFP batteries when required.)

Revov imports these batteries from BYD, tests and refurbishes them, placing them into more usable enclosures for the verticals it serves (mostly in 5 kWh or 10 kWh packages and can build configurations with up to 20 000 batteries) and distributes them through its channel partners. Batteries can be built into containers, which can be linked to provide up to 7200 kWh for more high-voltage applications.

Dickerson says the batteries should last for 10 years (or more), depending on use. If they complete a full cycle each day, that would be about 3650 cycles over 10 years, which they can easily handle.

Revov works with its resellers to make sure the batteries are installed correctly and deliver the best service when used with solar panels and other off-grid solutions – and it has the skills onboard to provide additional support if required. Naturally, the batteries don’t need to be used with solar or other renewable sources, but can be used during peak electricity hours and charged in off-peak hours. And of course, they are invaluable when Eskom breaks its toys and we end up with load-shedding.

Currently the cost of a solution is only slightly more than Eskom’s fees, but once the next round of increases occurs, the solution will actually be cheaper. With a return on the infrastructure investment in about five years, Dickerson says the numbers speak for themselves, with a 0,01% return rate over the past 42 months during which it has supplied around 110 MWh in total. Each battery has a warranty for 10 years or 3500 cycles.

Why LFP?

When asked why Revov’s LFP batteries would be a better choice than traditional lead-acid batteries, Dickerson offers a number of benefits. The first is temperature. While Revov’s batteries and lead-acid batteries cost about the same, the LFP systems operate at a higher ambient temperature (between 33°C and 35°C without degradation) as opposed to 25°C of lead-acid batteries.

This makes the 12 V options suited for outdoor perimeter security around farms and other remote areas, for example. The outdoor heat will reduce the lifespan of lead-acid batteries far faster than LFPs, making your battery investment last longer.

In addition, while discharging lead-acid batteries to less than 50% of their capacity can reduce the battery’s full lifespan faster, LFP batteries can use almost 100% of their capacity without such deterioration. Finally, LFP batteries are also smaller and weigh less.

Revov has a direct presence in Cape Town, Durban and Johannesburg from where it supports its South African partners and customers and it has partners in Namibia, Zimbabwe and Botswana.




Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Quality batteries are critical for IIoT
Uniross Batteries Power Electronics / Power Management
Batteries intended for use in industrial operations must indeed offer complete reliability under extreme environmental conditions, resistance to vibration and harsh environments.

Read more...
12 kW hybrid inverter
Power Electronics / Power Management
Sungrow recently unveiled its next-generation residential energy storage solution, expanding its power range from 5 kW to 12 kW with the introduction of the new MG12RL hybrid inverter.

Read more...
40 W and 75 W railway DC/DC converter
Brabek Power Electronics / Power Management
RECOM has announced two new cost-efficient DC/DC converters for the rail market with an ultra-wide 11:1 input range to cover all nominal input voltages from 24 to 110 V DC.

Read more...
Power modules for solid-state transformers
RS South Africa Power Electronics / Power Management
Microchip’s new 3,3 kV silicon carbide modules deliver the required thermal performance and efficiency for SSTs to increase power available for token generation.

Read more...
Solving South African power problems with locally built intelligence
Editor's Choice Power Electronics / Power Management
Smart metering infrastructure in South Africa remains patchy. The rollout has been slow, coverage is inconsistent, and for the most part, granular per-unit measurement simply does not exist.

Read more...
Wide range power module
Power Electronics / Power Management
The latest DC-DC modules from Würth Elektronik are characterised by high resilience to voltage transients on the 24 V bus and an extremely wide input-voltage range from 3,5 V to 38 V.

Read more...
Selecting primary batteries for maximum service life
Uniross Batteries Power Electronics / Power Management
Primary batteries play an important role in IoT applications. Designed for longevity, they have a high-energy capacity and are often used in standalone applications where charging is impractical or impossible.

Read more...
4 kW e-mobility DC-DC converter
Brabek Power Electronics / Power Management
The RECOM RMOD4000 series of compact, plug-and-play DC-DC converters is a cost-effective solution to provide isolated 14 V, 28 V, or 56 V DC network rails from a high input voltage between 180 and 950 V DC.

Read more...
Aluminium case upgrade boosts performance
Vepac Electronics Power Electronics / Power Management
The SQBF Quarter Brick 300 W DC to DC Converter is now available in a newly upgraded metal case designed to deliver improved durability and superior electrical performance across demanding applications.

Read more...
Extending the range of power converters
RS South Africa Power Electronics / Power Management
Power Integrations recently announced a breakthrough in flyback topology extending the power range of flyback converters to 440 W - well beyond the limits that traditionally required more complex resonant and LLC topologies.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved