RF 5G cavity filters are one of the various types of radio frequency filters, a basic component of modern communication systems, and one of the four most common filters in the current generation. They are a type of resonant filter, which are most commonly made up of a metal resonator with a metal shell and thick metal coil. Multiple metal resonators are used to form a cavity filter.
Because of its large size and solid structure, the RF cavity filter can be operated reliably in harsh environments for many years. Also, it can withstand high-power signals, so it is very suitable for communication applications from 10 MHz to 10 GHz. At lower frequencies, the cavity is large and the internal cable is longer, while at higher frequencies, the cavity volume will be reduced. The function of the 5G RF cavity filter is to pass or reject the RF signal in the specified frequency range.
There are usually four types of RF filter: band-pass, high-pass filter, low-pass and band-stop. They are typically used in base stations, high-power transmitters, cellular tower communication and satellite communication.
Based on over 25 years of experience, Temwell has established a one-stop service for 5G RF cavity filters, featuring high specifications across a wide range of power requirements. Models include high-pass cavity filters, low-pass cavity filters, RF cavity filters, band-stop cavity filters and cavity notch filters. The company’s customer service accommodates frequency and bandwidth changes, attenuation value requests, size changes, impedance changes, connector types, group delays, power levels and more.
New series of power ribbon wire-wound resistors Electrocomp
Power Electronics / Power Management
This QL/QRZG series of high-power resistors have a high-power load up to 2500 W and are suitable for applications such as industrial braking, EV battery packs and charging stations.
Read more...Take advantage of Wi-Fi 6, 6E Altron Arrow
Telecoms, Datacoms, Wireless, IoT
Infineon has provided a host of online resources to learn more about the technology and benefits involved with Wi-Fi 6.
Read more...Qorvo announces new satcom MMIC power amp RF Design
Telecoms, Datacoms, Wireless, IoT
The QPA1724 SiC 20 W power amplifier operates in the Ku-K band and is aimed at defence and commercial satellite applications.
Read more...40 GHz RF switch from Marki Microwave RF Design
Telecoms, Datacoms, Wireless, IoT
The MSW2-1001ELGA is a reflective SPDT switch that operates in the frequency range from 100 MHz to 40 GHz.
Read more...Surface-mount resettable fuses Electrocomp
Passive Components
The new series of fuses, suitable for overcurrent and thermal protection, expand the hold current up to 6 A and the maximum voltage to 33 V DC.
Read more...Inertial module enables on-chip AI training Altron Arrow
Telecoms, Datacoms, Wireless, IoT
MIA-M10 concurrently receives four GNSS constellations (GPS, Galileo, BeiDou, and GLONASS) for maximum satellite signal availability.
Read more...Positioning module with quick TTFF iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
The LC76G GNSS positioning module features fast and accurate position location performance as well as ultra-low power consumption.