Mean Well has introduced a new LED power supply featuring high output voltage and low current rating. The 70 W HLG-60H-C series is designed to fulfil the demands of low- to middle-wattage LED lighting applications.
With 90–305 V a.c. input, the units have 350 mA (200 V d.c. maximum output) or 700 mA (100 V d.c. maximum output) rated constant current, which are commonly used by lighting fixture designers. Combating the influence of dust and moisture in outdoor or harsh indoor environments, they are fully potted by glue (IP65/67 structure) and enclosed in an aluminium case.
Using the HLG-60H-C in an LED lighting fixture allows connection of numerous LEDs in one single strip up to the highest voltage rating of the driver. With this design, users do not need to sort the forward voltage of LEDs but can still reach the ideal constant current as well as prolong the lifetime for the LED strips.
With constant voltage plus constant current design, the power supplies integrate two-stage active power factor correction and comply with EN61000-3-2 Class C (>60% load) harmonic current limitation. They also offer a power factor in excess of 0,9 if loading over 50% and possess 4 kV surge immunity (EN61000-4-5) which complies with the requirements of street lighting.
The HLG-60-C series boasts up to 91% efficiency, allowing it to be cooled by free air convection from -40°C to +70°C ambient temperature and meeting the high-temperature requirements of closed lighting systems.
Besides standard protection functions for short circuit, over-voltage, overload and over-temperature, these power units provide a three-in-one dimming function (B type) or timer dimming function (D type).
Rugged railway-grade DC-DC power modules iCorp Technologies
Power Electronics / Power Management
iCorp Technologies has introduced the AIPUPOWER ZCD100 and ZCD150 Series, a family of rugged DC-DC converters designed to meet the demanding electrical and environmental requirements of railway and transportation systems.
Read more...Four-quadrant regenerative grid simulator Conical Technologies
Power Electronics / Power Management
The IT7900EP series high-performance regenerative grid simulator from ITECH is a full four-quadrant AC grid simulator capable of both sourcing and sinking power.
Read more...90 W PSU with 150% boost capability Brabek
Power Electronics / Power Management
RECOM’s cost effective REFIN2U-S90/CL DIN rail AC/DC boasts a 90 W rating with a boost capability of 150% for 4,5 seconds to allow for surge loads.
Read more...Standalone USB PD controller Future Electronics
Power Electronics / Power Management
The STUSB4531 from STMicroelectronics is a standalone USB Power Delivery sink controller designed to streamline the implementation of USB-C power negotiation in sink devices without requiring a full software stack on a host microcontroller.
Read more...MIL-Spec DC-DC power converters Vepac Electronics
Power Electronics / Power Management
PowerGood has introduced a range of 15 W to 600 W military DC-DC power converters engineered for mission critical defence applications.
Read more...Compact power MOSFET for high current switching Future Electronics
Power Electronics / Power Management
onsemi’s NTMFSC2D6N08X is a high-performance 80 V N-channel power MOSFET engineered for demanding switching and power conversion applications.
Read more...DC link capacitors for demanding applications RS South Africa
Power Electronics / Power Management
TDK Corporation has announced the B3271xP series of DC link film capacitors, offering high thermal robustness for demanding automotive and industrial power electronics.
Read more...N-channel power MOSFETs TRX Electronics
Power Electronics / Power Management
The TSM2N7002 series from Taiwan Semiconductor are logic-level N-channel power MOSFETs designed with low drain-source on-state resistance, reducing conduction losses and improving efficiency in switching applications.
Read more...Smart power protection, simplified TRX Electronics
Power Electronics / Power Management
onsemi electronic fuses (eFuses) deliver integrated, intelligent protection by combining overcurrent, overvoltage, over-temperature, reverse polarity, and inrush current safeguards in a single compact IC.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version