Passive Components


Quad resistor networks

22 August 2012 Passive Components

Linear Technology introduced the LT5400, its first family of precision-matched resistors designed for high-performance signal conditioning applications in different amplifiers, precision dividers, references and bridge circuits.

Three resistor network options are in full production with resistor ratios of 1:1 and 10:1 quad 10 kΩ resistors, quad 100 kΩ resistors and dual 10 kΩ/dual 100 kΩ resistors. Each chip has guaranteed matching of 0,01% from -40°C to 85°C, and 0,0125% from -40°C to 125°C.

The LT5400 matching is enhanced with ‘matching for CMRR,’ a feature that guarantees CMRR performance when configured in a difference amplifier circuit. The LT5400 matching for CMRR is only 0,005%, a two-fold improvement over independent resistors with 0,01% matching.

As a replacement for discrete resistors, the small MSOP package minimises thermal gradients and ensures consistent conditions over time and temperature for all four resistors. Since the LT5400 is based on conventional silicon fabrication and assembly, it is relatively insensitive to shock, vibration, humidity and temperature extremes.

A high-temperature option is available that is fully specified from -55°C to 150°C. With its robustness, the LT5400 is suitable for instrumentation and test equipment in heavy industrial, military and automotive environments. Standard production processes ensure LT5400 availability with consistently short lead times.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Accelerate development of physical AI deployments
Altron Arrow DSP, Micros & Memory
With Avocado OS now available on the HummingBoard RZ-V2N- AIoT and SolidSense AIoT V2N from SolidRun, teams can move from prototype to deployed fleet in weeks.

Read more...
SMT flat-wire inductor for automotive electronics
Passive Components
Würth Elektronik introduces its new WE-SFIA series of flat-wire inductors in 2010, 2013, and 2016 packages.

Read more...
Nanocrystalline cores for cable assembly
Passive Components
Conventional MnZn and NiZn ferrite cores for cable assembly are now complemented by nanocrystalline cable cores.

Read more...
Universal NFC device
Altron Arrow DSP, Micros & Memory
Delivering high-end performance in a compact 4 x 4 mm package, the multipurpose NFC reader from ST Microelectronics, enables the convenience of contactless interaction and features for various end applications.

Read more...
Compact direct Time-of-Flight 3D LiDAR module
Altron Arrow AI & ML DSP, Micros & Memory
The VL53L9 from STMicroelectronics is the first direct Time-of-Flight (dToF) 3D LiDAR all-in-one module in ST’s portfolio, offering a resolution of 2,3K zones, wide field of view, on-chip processing, 100 frames per second, and sensing range from 5 centimeters to 9 meters.

Read more...
Heat sinks for power-electronics and IC components
Passive Components
Würth Elektronik introduces heat sinks for power-electronics and IC components.

Read more...
SoC brings scalable edge AI to life
Altron Arrow AI & ML
The NXP i.MX 937 applications processor is optimised for performance without excessive power draw and bridges the gap between entry-level chips and high-end processors.

Read more...
Accelerate STM32-based IoT development with SPI EEPROM board
Altron Arrow Computer/Embedded Technology
ST Microelectronics’ ready-to-use STM32 expansion board helps design more efficient battery-friendly IoT devices based on ultra low power 32-Mbit Page.

Read more...
Compact direct Time-of-Flight 3D LiDAR module
Altron Arrow Opto-Electronics Electronics Technology AI & ML
The VL53L9 from STMicroelectronics is the first direct Time-of-Flight (dToF) 3D LiDAR all-in-one module in ST’s portfolio, offering a resolution of 2,3K zones, wide field of view, on-chip processing, 100 frames per second, and sensing range from 5 centimeters to 9 meters.

Read more...
Cooling solutions for modern electronics
Future Electronics Passive Components
As electronic systems become more compact and powerful, effective thermal management has become a critical aspect of product design.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved