Euroquartz has introduced a new range of low-EMI oscillators that are a ‘drop-in’ replacement for standard clock oscillators. They are suitable for use in a wide range of applications.
The HM572 ‘N’ series uses spread spectrum (dithered) techniques to reduce EMI emissions from the oscillator by 8 to 15 dB. In most electronic systems, the principal cause of EMI is the system clock so it makes sense to reduce this at source rather than relying on traditional methods of patching up systems with ferrite beads, ground planes, metal shielding and similar costly additions.
Spread spectrum technology spreads the mode energy over a wider bandwidth and, as the technique operates in the kHz region, the process is transparent to the oscillator operating frequency.
The low-EMI oscillators are housed in standard 7 x 5 x 1,4 mm surface mount packages. The available frequency range is from 8 to 128 MHz and specifications include a choice of spread type and modulation depth. The modulation carrier frequency varies from 31,25 kHz minimum to 62,5 kHz maximum dependent upon operating frequency and the specification required.
Frequency stability is from ±25 ppm to ±100 ppm over both commercial (0 to
70°C) and industrial (-40 to +85°C) temperature ranges.
High reliability memories Altron Arrow
DSP, Micros & Memory
Infineon’s mil-temp memories offer a wide selection of volatile and non-volatile memories for applications that meet QML-Q certifications and offer support for mil-aero applications.
Read more...Reference board for cardio monitoring Altron Arrow
Telecoms, Datacoms, Wireless, IoT
The STDES-ESP01 reference board from STMicroelectronics demonstrates the capability of the ST1VAFE6AX and ST1VAFE3BX biosensors to detect ECG and SCG signals.
Read more...ST MCUs extend ultra-low power innovation Altron Arrow
DSP, Micros & Memory
STMicroelectronics has introduced new STM32U3 microcontrollers with cutting-edge power-saving innovations that ease deployment of smart connected tech, especially in remote locations.
Read more...Multicell battery monitoring Altron Arrow
Power Electronics / Power Management
The LTC6811 from Analog Devices is a multicell battery stack monitor that measures up to 12 series connected battery cells with a total measurement error of less than 1,2 mV.
Read more...A new era in modular I/O solutions Rugged Interconnect Technologies
Analogue, Mixed Signal, LSI
Aerospace and defence system designers are demanding scalable and high-performance I/O solutions and while traditional mezzanine standards have proven reliable, they often fall short of meeting modern bandwidth, size, and flexibility requirements.
Read more...High voltage instrument op-amp iCorp Technologies
Analogue, Mixed Signal, LSI
The SGM621B is a high accuracy, high voltage instrumentation amplifier, which is designed to set any gain from 1 to 10 000 with one external resistor.
Read more...Innovative satellite navigation receiver Altron Arrow
Telecoms, Datacoms, Wireless, IoT
STMicroelectronics has released an innovative satellite navigation receiver to democratise precise positioning for automotive and industrial applications.
Read more...LED driver for industrial power supply indication Altron Arrow
Editor's Choice Circuit & System Protection
A simple and small solution for driving an LED to provide visual feedback in the presence/absence of a system’s power using a chip not originally designed for this purpose.
Read more...High-voltage step-down DC-DC converter Altron Arrow
Power Electronics / Power Management
The MAX17793 is a high-efficiency, high-voltage, synchronous step-down DC-DC converter with integrated MOSFETs operating over an input voltage range of 3 to 80 V.
printer friendly version