mobile | classic
Dataweek Electronics & Communications Technology Magazine





Follow us on:
Follow us on Facebook Share via Twitter Share via LinkedIn


Search...

Electronics Buyers' Guide

Electronics Manufacturing & Production Handbook 2019


 

AC Watt transducers
19 September 2012, Test & Measurement

OSI is offering a series of Watt transducers utilising Hall-effect multipliers to provide continuous multiplications of voltage and current to accurately measure real power delivered to a load. The units feature high accuracy, regardless of variations in voltage, current, power factor or load.

The transducer’s output is proportional to true power delivered to a load. Accuracy is maintained when supplied with internal or external current transducers which are factory calibrated by OSI. The device is designed for use with SCR controls, chopped waveforms or where harmonic components exist.

Standard outputs provide signals for interface with meters, recorders or data acquisition equipment. The units have been widely used in applications with chopped waveforms or distorted waveforms where they have advantages over pulse-width modulated units. They offer full-scale current up to 1000 A/600 V single-phase, three-phase, 3- or 4-wire.


Credit(s)
Supplied By: Denver Technical Products
Tel: +27 11 626 2023
Fax: +27 11 626 2009
Email: denvertech@pixie.co.za
www: www.denver-tech.co.za
  Share on Facebook Share via Twitter Share via LinkedIn    

Further reading:

  • Automotive Ethernet testing software
    25 September 2019, Comtest, Test & Measurement
    Tektronix has released two new software packages that greatly simplify Automotive Ethernet testing, debug and protocol decode for use with its 5 and 6 Series mixed-signal oscilloscopes (MSO). Using ...
  • 4-channel PC-based oscilloscope
    28 August 2019, Vepac Electronics, Test & Measurement
    The newly developed Model 1330 from Peaktech is a 4-channel PC oscilloscope with 100 MHz bandwidth and 1 GSps sample rate, which is suitable for mobile use on a laptop, and permanent installation in control ...
  • Handheld PoE tester
    26 June 2019, Coral-i Solutions , Test & Measurement
    Ideal Networks has launched a new handheld tester that eliminates guesswork when installing, maintaining and troubleshooting PoE devices and data cabling. PoE Pro measures and reports PoE class, voltage/voltage ...
  • Debugging probe for STM32 MCUs
    31 July 2019, Altron Arrow, Test & Measurement
    The STLINK-V3MINI probe, new from STMicroelectronics, combines the features of the STLINK-V3SET with standalone simplicity for faster programming and ease of use. The compact, portable probe can be ...
  • Digitiser for advanced applications
    31 July 2019, Comtest, Test & Measurement
    Tektronix, Inc. has unveiled the 6 Series low-profile digitiser, a 4-channel instrument offering up to 8 GHz bandwidth, 25 GSps sampling rate and a 12-bit ADC (analog-to-digital converter) on every channel, ...
  • Cost-effective tools for makers and small businesses to innovate
    31 July 2019, TRX Electronics, Test & Measurement
    In addition to professional engineers, makers and hobbyists are now able to contribute significantly to innovation in our modern world – as they can develop ideas with passion and without the financial and logistical constraints that often stifle ideas in large corporations.
  • Sniffer software gets J-Link RTT terminal plugin
    31 July 2019, RF Design, Test & Measurement
    Despite being fans of the Real-Time Trace (RTT) feature in Segger’s J-Link debug probes, engineers at Tibbo found that Segger’s own RTT Viewer software was a bit too simple for their needs, and so created ...
  • EXFO launches new category of fibre testing solutions
    26 June 2019, Lambda Test, Test & Measurement
    EXFO has launched what it describes as the first optical fibre multimeter (OFM). Called Optical Xplorer, it aims to make fibre testing simple for all frontline technicians, whether beginner or expert, ...
  • Handheld industrial Ethernet tester
    26 June 2019, Coral-i Solutions , Test & Measurement
    Ideal Networks has launched NaviTEK IE, a handheld network tester designed for commissioning, preventative maintenance and troubleshooting of PROFINET industrial Ethernet networks, plus standard Ethernet ...
  • PCB cleaning diagnostic system
    26 June 2019, Electronic Industry Supplies, Test & Measurement
    The Verinas system from PBT Works is a dedicated piece of AOI (automatic optical inspection) equipment for evaluating remaining flux residues on PBT glass test boards. The system can be used by electronics ...
  • 2-channel digital storage oscilloscope
    26 June 2019, Vepac Electronics, Test & Measurement
    The Model 1335 is PeakTech’s latest-generation 2-channel digital storage oscilloscope (DSO) for the education and professional sector. With its attractive price-performance ratio, modern technology and ...
  • New MDO and MSO from Tektronix
    26 June 2019, Comtest, Test & Measurement
    Tektronix has grown its portfolio with the launch of the 3-Series mixed domain oscilloscope (MDO) and 4-Series mixed-signal oscilloscope (MSO) delivering the most powerful, versatile and easy-to-use oscilloscopes ...

 
 
         
Contact:
Technews Publishing (Pty) Ltd
1st Floor, Stabilitas House
265 Kent Ave, Randburg, 2194
South Africa
Publications by Technews
Dataweek Electronics & Communications Technology
Electronics Buyers’ Guide (EBG)

Hi-Tech Security Solutions
Hi-Tech Security Business Directory

Motion Control in Southern Africa
Motion Control Buyers’ Guide (MCBG)

South African Instrumentation & Control
South African Instrumentation & Control Buyers’ Guide (IBG)
Other
Terms & conditions of use, including privacy policy
PAIA Manual





 

         
    Classic | Mobile

Copyright © Technews Publishing (Pty) Ltd. All rights reserved.