Passive Components


Plug-in current transformers

6 March 2013 Passive Components

WAGO’s 855 Series plug-in current transformers are equipped with screwless connection technology and are available for various primary currents up to 1000 A. They are UL recognised components suitable for 230 V, 400 V and 690 V low-voltage applications, up to a maximum operating voltage of 1,2 kV.

The 855 Series transforms rated primary currents into electrically isolated secondary currents up to 1 A with a measuring accuracy of 1%. They can be used in operating temperatures ranging from


-5°C to +50°C and may be permanently loaded with up to 120% of the nominal current.

Cage clamp connection technology provides screwless termination of conductors ranging from 0,08 to 4 mm² (AWG #28–#12). Conductors can be terminated from both the front side and the rear side of the transformers. The plastic housing is extremely robust and can be mounted in four different ways: on round cables, on copper current bars, on mounting plates and, depending on the version, on carrier rails.

For more information contact Shorrock Automation, +27 (0)12 345 4449, sales@shorrock.co.za, www.shorrock.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Mini air core inductors
29 July 2020, RF Design , Passive Components
Coilcraft has released its latest mini air core inductors, the 1512SP /2712SP Series. Specifications include Q factors up to 100 at 150 MHz; a wide range of standard EIA inductance values from 2,5 to ...

Read more...
Supercapacitors usurping batteries, says IDTechEx
31 August 2020 , Passive Components
A new IDTechEx report shows that supercapacitors have started to replace 10% of lithium-ion batteries and also help to kill lead-acid.

Read more...
Mini air core inductors
31 August 2020, RF Design , Passive Components
Coilcraft has released its latest mini air core inductors, the 1512SP/2712SP Series. Specifications include Q factors up to 100 at 150 MHz; a wide range of standard EIA inductance values from 2,5 to 150 nH ...

Read more...
CeraCharge now available in a small packing unit
30 June 2020, Electrocomp , Passive Components
TDK is presenting a new packing unit for CeraCharge, the world’s first SMD technology solid-state rechargeable battery, in the compact size EIA 1812 (4,4 x 3,0 x 1,1 mm). The packing unit (B73180A0101M199) ...

Read more...
Surface mount resistors and terminations
30 June 2020, RF Design , Passive Components
Smiths Interconnect announced the release of its extended CXH series of surface mount chip resistors and terminations. The CXH series uses a patented layout to provide improved power handling over conventional ...

Read more...
Broadband capacitors and their significance
30 June 2020, TRX Electronics , Passive Components
There are a number of circuits that require coupling RF signals or bypassing them to ground while blocking DC over extraordinarily large RF bandwidths. The applications for which they are intended typically ...

Read more...
Thick-film chip resistors
29 April 2020, Electrocomp , Passive Components
Bourns announced the introduction of its new Model CR01005 series thick-film chip resistor. This extra small – 01005 inch (0402 metric) – CR01005 series broadens the general purpose thick-film chip resistor ...

Read more...
Automotive-grade MLCCs
29 April 2020, TRX Electronics , Passive Components
Yageo's automotive grade MLCC (multilayer chip capacitor) AC/AS series is AEC-Q200 qualified as well as MIL-STD-020D tested to ensure its reliability under various temperatures (from -55°C to +150°C) ...

Read more...
Chip resistors in automotive grade
29 May 2020, Altron Arrow , Passive Components
Vishay has enhanced its MC AT precision series of automotive grade thin film chip resistors with a wider range of resistance values from 47 Ω to 10 MΩ in the 1206 case size. The MCA 1206 AT is the industry’s ...

Read more...
Storage choke against harmonic distortion
29 April 2020, Würth Elektronik eiSos , Passive Components
The WE-LHMD is an SMT-mountable storage choke from Würth Elektronik optimised for filter topologies in Class-D amplifiers. Thanks to their iron powder cores, the high-current inductors for audio applications ...

Read more...