Opto-Electronics


White LEDs for retrofit lamps

10 July 2013 Opto-Electronics

New from Philips Lumileds is the LUXEON 3535 2D, which combines two LED chips in a package to enable reduction in LED count and cost of designing retrofit lamps, consumer downlights and diffuse industrial lamps. High efficacy of 140 lm/W is achieved for cool white light at 4000 K and minimum 80 CRI. This allows a 50 W PAR20 lamp to be achieved using only four LEDs, or a 40 W A19 lamp that previously required 14 LEDs to be created using only six.

The new mid-power LEDs are offered across a full spectrum of correlated colour temperatures (2700 K-6500 K) with a minimum CRI of 80. Versions with CRI 70 for outdoor applications and CRI 90 for high-end indoor applications are planned for future release.

The LUXEON 3535 2D line operates at 0,5 to 1 W, delivering up to 130 lumen in the compact 3535 form factor. Rated at 100 mA, the LED can be driven up to a maximum of 200 mA. It supports ENERGY STAR certification requirements up to 25 000 hours at 85°C and 150 mA.

In addition to the expansion of its mid-power offering, Philips Lumileds also introduced its first low-power LED solution, the LUXEON 4014. This rectangular device is a high-efficacy LED designed to address linear and omnidirectional lighting applications such as under-cabinet and cove, refrigerator lighting and the retrofit LED market. Delivered in a 4,0 x 1,4 x 0,7 mm footprint, the 4014 line can achieve an efficacy of 160 lm/W at 4000 K and CRI of 80.

For more information contact Michael Nel, Avnet Kopp, +27 (0)11 319 8600, [email protected], www.avnet.co.za





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

PhotoMOS relays
Future Electronics Opto-Electronics
The AQY221R2SX and AQY221R2S PhotoMOS from Panasonic Industry ensures excellent characteristics and high-speed switching performance.

Read more...
Mouser now shipping onsemi’s image sensors
Opto-Electronics
The AR0145CS is a 1/4,3-inch CMOS digital image sensor with a 1280 (H) x 800 (V) active-pixel array that can capture both continuous video and single frames.

Read more...
Adaptive optics’ power solution
Altron Arrow Opto-Electronics
Vicor power-dense adaptive optical modules enable colossal telescopes to look into the past for deep space discoveries.

Read more...
Ultra-high speed photo detection
Opto-Electronics
TDK Corporation has announced a photo-spintronic conversion element combining optical, electronic, and magnetic elements that can respond at an ultra-high speed of 20 picoseconds.

Read more...
High-speed lasers
RFiber Solutions Opto-Electronics
Macom are a high-volume manufacturer of lasers, deploying more than 100 million devices with a reliability of less than 50 FIT and greater than 100 years of wear-out lifetime

Read more...
High-performance optical interconnect
Opto-Electronics
STMicroelectronics has unveiled its next generation of proprietary technologies for higher-performing optical interconnect in datacentres and AI clusters.

Read more...
Halo mid-board optical transceiver
Spectrum Concepts Opto-Electronics
The Samtec Halo mid-board transceiver has been designed for next-generation embedded applications that require 56 and 112 Gbps PAM4 performance in low profile and ruggedised form factors.

Read more...
New generation of Ethernet media converters
IOT Electronics Opto-Electronics
Phoenix Contact is introducing three new families of media converters to the market, each designed for specific industrial environments and challenges.

Read more...
PIN photodiode with integrated lens
RFiber Solutions Opto-Electronics
The MARP-BP112 from Macom is a backside-illuminated PIN photodiode, usable from 1200 nm to 1650 nm, that is optimised for use in 112 GBaud PAM4 applications.

Read more...
RGBIR sensor with I2C interface
Opto-Electronics
Available in a miniature opaque 2,67 x 2,45 mm package, Vishay’s VEML6046X00 includes high-sensitivity photodiodes, a low noise amplifier, and a 16-bit analogue to digital converter.

Read more...