Manufacturing / Production Technology, Hardware & Services


New component mounting head and feeder

23 October 2013 Manufacturing / Production Technology, Hardware & Services

Fuji Machine Manufacturing has developed the new DynaHead (HX) and HexaFeeder for its electronic component mounting machines. DynaHeads are supported on AIMEX II and AIMEX IIS machines while HexaFeeders are supported on NXT II, NXT III machines as well as AIMEX-series machines.

DynaHead is a versatile, high-speed placing head that automatically switches the tool being used during production between the high-speed 12-nozzle tool, the 4-nozzle general purpose tool, and the large odd-form part single nozzle tool.

HexaFeeders allow users to set six 8 mm tapes in the space of four 8 mm tape feeders, effectively increasing the loadable quantity of parts by 50%.

A single DynaHead can support parts from the smallest 0402 (01005”) chips up to 74 x 74 mm (100 x 32) with heights up to 25,4 mm. In addition, it can flexibly support sudden production plan changes in which the ratio of small to large parts changes with the synergistic characteristics of HexaFeeders.

The DynaHead is scheduled to be supported by Fuji’s NXT III and the company also plans to develop a glue tool for this head.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

The powerful impact of protecting future LED lighting applications
29 July 2020, Vepac Electronics , Manufacturing / Production Technology, Hardware & Services
The importance of electro-chemical products and their ability to protect LEDs and associated products from adverse environmental conditions, while at the same time ensuring efficient heat dissipation from these components.

Read more...
Company profile: Electronic Industry Supplies
29 July 2020, Electronic Industry Supplies , Manufacturing / Production Technology, Hardware & Services
Electronic Industry Supplies was founded by Helmut Reussenzehn in Pretoria in 1988, and has been operating from its current premises in Parktown, Johannesburg, since April 1993. Its relatively compact ...

Read more...
DDZ embarks on new venture
29 July 2020, DDZ Technologies , Manufacturing / Production Technology, Hardware & Services
Within the three years that DDZ Technologies made its move to its then new premises, it has outgrown them once again, and made the call to move to a new 1300 square metre building, more than double the ...

Read more...
Modular component placement platform
29 July 2020, Techmet , Manufacturing / Production Technology, Hardware & Services
Panasonic’s NPM (Next Production Modular) business line has released the NPM-D3A component placement machine, featuring speeds of up to 46 000 components per hour (cph). It boasts placement accuracy of ...

Read more...
Weller’s offering protects people and electronic circuits
29 July 2020, Allan McKinnon & Associates , Manufacturing / Production Technology, Hardware & Services
The product offering from Weller is able to ensure safety for not only electronic circuits during soldering, but also safety for the people performing the work. It has a range of fume extraction solutions ...

Read more...
IPC updates PCB acceptability standard
29 July 2020 , Manufacturing / Production Technology, Hardware & Services
IPC has released IPC-A-600K, ‘Acceptability of Printed Boards’, the definitive illustrated guide to printed circuit board acceptability. This companion document to IPC-6012, ‘Qualification and Performance ...

Read more...
Zestron touts broad use of its cleaning agents
29 July 2020, Electronic Industry Supplies , Manufacturing / Production Technology, Hardware & Services
The cleaning agents of the VIGON PE series for power electronics have been successfully established in the market and are qualified by leading power module manufacturers, according to Zestron.           ...

Read more...
Medical device PCB standard reaches new milestone
29 July 2020, Elmatica , Manufacturing / Production Technology, Hardware & Services
Recently the IPC 6012 ‘Medical Device Addendum’ reached a new milestone, passing the ballot after industry review. “We are extremely content with this step forward, moving us closer to industry launch. ...

Read more...
Mounting methods for high-power RF plastic devices
29 July 2020, RFiber Solutions , Manufacturing / Production Technology, Hardware & Services
Using this guide, customers should be able to develop mounting procedures that are compatible with their product design and manufacturing processes.

Read more...
Smart manufacturing for electronics
29 July 2020, ASIC Design Services , Manufacturing / Production Technology, Hardware & Services
This article describes a product development strategy designed for manufacturers of electronics for consumer and industrial products, home appliances, manufacturing services, automotive and transportation, ...

Read more...